HeatStar THP750S User manual

THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171

Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au

HEATSTAR

R A D I A N T P A N E L H E A T E R S

HEATSTAR RADIANT PANEL HEATER

USER MANUAL

Models:

THP750S

THP450

TABLE OF CONTENTS

1. Important Safety Instructions

2. Specification Data

3. Selection Guidelines

4. Installation and Operating Instructions –THP750S

4.1 Model THP750S

4.2 Ceiling Mounting

4.3 T-Bar Ceiling Mounting

4.4 Flush Mounting

4.5 Security Mounting

5. Installation and Operating Instructions –THP450

5.1 Model THP450

5.2 Ceiling Mounting

5.3 Wall Mounting

6. Warranty

THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171

Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au

HEATSTAR

R A D I A N T P A N E L H E A T E R S

1. Important Safety Instructions

•Prior to installing and operating the heater, read these instructions carefully and retain

for future reference.

•Indoor use only.

•Ensure the rated voltage is 230-240V.

•Do not install the heater directly below a socket.

•Do not operate this appliance if the cable or plug becomes damaged.

•In case of heater fault or damaged supply lead, the appliance should be returned to the

distributor /manufacturer for repair.

•Ensure the appliance is switched OFF before connecting to the mains power supply.

•Do not cover heater in any manner, as the appliance may overheat and become a fire risk.

•Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.

•Switch off the power supply and unplug from the mains socket when not in use, before

cleaning or changing accessories.

•Do not immerse in liquid or allow liquid into the interior of the appliance, as this could create

an electric shock hazard.

•Do not operate appliance with wet hands. Always ensure that hands are dry before operating

or adjusting any switch on the product or touching the plug and mains supply connections.

•Do not cover. NEVER use the heater to dry clothes or similar articles.

•Do not position the appliances close to curtains or other combustible materials. Keep

combustible material such as furniture, cushions, bedding, paper, clothes, curtains etc. at least

1.0m away from the heater.

•This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surface.

Switch off and let cool down before moving. Store the heater in a cool, dry location when not

in use.

•This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171

Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au

HEATSTAR

R A D I A N T P A N E L H E A T E R S

2. Specification Data

Model

Power (W)

Voltage (V)

Dimension (mm)

Rating

THP750

750W

230

240V

1190 x 590 x 30mm

IP44

THP450

230

240V

1080 x 380 x

25mm

IP44

3. Selection Guidelines

For comfort heating applications, a heat load calculation should be made and HEATSTAR units

selected to meet the heating requirements.

Model THP750S

The THP 750S model is designed for ceiling mounting. As a guideline for normally insulated areas with

a ceiling height from 2.4 to 3.6m, allow 15 square meters of floor space per heater.

For example, a room of 45 square meters would require 3 x THP 750S units

(45 sq m ÷ 15 sq m = 3 units)

Note: The THP 750S will heat larger rooms than 15 square meters but a longer warm up time is

required.

For zone heating applications, allow one (1) THP 750S unit per person, and mounting height should be

2.4 meters.

Model THP450

The THP 450 model is suitable for ceiling or wall mounting. As a guideline for normally insulated areas

with ceiling height of 2.4 to 3.2m, allow 9 square meters of floor space per heater.

For example, a room of 18 square meters would require 2 x THP 450 units

(18 sq m ÷ 9 sq m = 2 units)

Note: The THP 450 will heat larger rooms than 9 square meters but longer warm up time is required.

4. Installation and Operating Instructions –THP 750S

4.1 Model THP750S

The THP 750S is designed to mount directly onto ceilings, suspend from high ceilings, fit into T-Bar

ceilings, or flush mount in plastic ceilings.

It is recommended that an appropriate thermostat control and or timer control is used in conjunction

with the THP 750S.

4.2 Ceiling Mounting

Fix mounting bracket in the desired location

with suitable fixing devices more than capable

of safely supporting the heater.

The fixing devices should be suitable for the

type of mounting surface; plaster, timber,

concrete etc

Position the heater onto the bracket

THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171

Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au

HEATSTAR

R A D I A N T P A N E L H E A T E R S

Then use the 2 screws provided to lock the

heater into the bracket.

4.3 T-Bar Ceiling Mounting

Remove ceiling tile from the standard 600 x 1200 T-Bar ceiling grid and fit the heater into position.

4.4 Flush Mounting –Plaster Ceilings

Purchase a standard 600 x 1200 flush mounting bracket (same as used for skylight brackets). Fit flush

mounting bracket into ceiling, and locate heater into bracket.

4.5 Security Mounting –Prison Locations

Special security mounting brackets are available from Thermofilm. These are suitable for high security

locations and areas where vandalism may occur.

5. Installation and Operating Instructions –THP 450

5.1 Model THP 450

The THP 450 is designed for wall or ceiling mounting.

5.2 Ceiling Mounting

Fix mounting bracket in the desired location

with suitable fixing devices more than capable

of safely supporting the heater.

The fixing devices should be suitable for the

type of mounting surface; plaster, timber,

concrete etc

Position the heater onto the bracket

Then use the 2 screws provided to lock the

heater into the bracket.

5.3Wall Mounting

Fix mounting bracket in the desired location

with suitable fixing devices more than capable

of safely supporting the heater.

The fixing devices should be suitable for the

type of mounting surface; plaster, timber,

concrete etc

THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171

Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au

HEATSTAR

R A D I A N T P A N E L H E A T E R S

Position the heater onto the bracket

Then use the 2 screws provided to lock the

heater into the bracket.

5. Warranty

HEATSTAR heaters have a TWO (2) YEAR WARRANTY*.

To claim for Warranty, please retain your receipt as proof of purchase and return the faulty heater to

the place you purchased it.

Warranty does not apply to heaters which have been misused or used in conditions other than those

for which they were intended for. Nor will it apply in the event of damage or accident resulting from

negligence, lack of care or maintenance, or if the heater has been modified in any way.

Thermofilm Australia Pty Ltd reserve the right to reject any Warranty claim deemed to be false.

Retailers must have Warranty claims authorised by Thermofilm Australia. Ph 03 9562 3455

* Conditions apply. Please refer the Thermofilm standard terms of sale and warranty for details.

This manual suits for next models

Table of contents

Other HeatStar Heater manuals

HeatStar

HeatStar HSP70ID Assembly instructions

HeatStar

HeatStar HS 3500DF Assembly instructions

HeatStar

HeatStar HSU100NGPALP Assembly instructions

HeatStar

HeatStar ER2STG 80-125 Assembly instructions

HeatStar

HeatStar HSSVFRD20LPBT Assembly instructions

HeatStar

HeatStar HSVFRD20NGBTS Assembly instructions

HeatStar

HeatStar HS115SF Assembly instructions

HeatStar

HeatStar HS50K Assembly instructions

HeatStar

HeatStar ERSP-60 Assembly instructions

HeatStar

HeatStar HS80CVNG Assembly instructions

HeatStar

HeatStar Blue Flame series Assembly instructions

HeatStar

HeatStar HS60CLP Assembly instructions

HeatStar

HeatStar MH4B Assembly instructions

HeatStar

HeatStar HSSVFRD30NGBT Assembly instructions

HeatStar

HeatStar JET20 Assembly instructions

HeatStar

HeatStar HS400FAVT Assembly instructions

HeatStar

HeatStar HS115TC Assembly instructions

HeatStar

HeatStar HSU200NG Assembly instructions

HeatStar

HeatStar HSP60R Assembly instructions

HeatStar

HeatStar MHU50 Assembly instructions

HeatStar

HeatStar 4000ID HD Assembly instructions

HeatStar

HeatStar HSP400ID-G Assembly instructions

HeatStar

HeatStar F140625 Assembly instructions

HeatStar

HeatStar ERXL-80 Assembly instructions

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide