HeatStar HSP60R Assembly instructions

WARNING: This is a target infrared portable heater. It uses air (oxygen) from the area in which

it is used. Provisions for adequate combustion and ventilation air must be provided. Refer to “FRESH

AIR AND VENTILATION” on page 4.

WARNING: Improper adjustment, alteration, service or maintenance can cause injury or property

damage. Refer to this manual for correct installation and operational procedures. For Assistance or

additional information consult a service agency.

ENERCO GROUP, INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 · 866-447-2194

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury, or loss of life.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other appliance.

– Service must be performed by a service agency.

HSP60R HSP125R/HSP150R

PORTABLE INDUSTRIAL OIL-FIRED

RADIANT HEATERS

OPERATING INSTRUCTIONS

AND OWNER’S MANUAL

MODEL#

HSP60R HSP125R

HSP150R

READ INSTRUCTIONS CAREFULLY: YOUR SAFETY IS IMPORTANT TO YOU AND TO OTHERS.

Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow

anyone who has not read these instructions to assemble, light, adjust or operate the heater.

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

2Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

CONTACT INFORMATION

RETAIN THIS MANUAL FOR FUTURE REFERENCE.

FOR QUESTIONS, PROBLEMS, MISSING PARTS BEFORE RETURNING

TO RETAILER PLEASE CALL WITH MODEL NUMBER AND SERIAL

NUMBER OF HEATER:

866-447-2194

MONDAY-FRIDAY 8-5 EASTERN TIME

OR E-MAIL USING THE HEATSTAR WEBSITE:

WWW.HEATSTARBYENERCO.COM

In order to provide the best service possible HEATSTAR is now

giving you more ways to get in touch with us. Find informational

videos at:

YouTube: youtube.com/heatstarTV

HEATSTAR’S full line of product are now at:

WWW.HEATSTARBYENERCO.COM

CONTENTS

HAZARD WARNINGS ................................................. 2

SPECIFICATIONS ........................................................ 3

CLEARANCES TO COMBUSTIBLES.............................. 3

PRECAUTIONS ........................................................... 3

UNPACKING & ASSEMBLY......................................... 4

FRESH AIR AND VENTILATION ................................... 4

OPERATION ............................................................... 5

TRANSPORTATION..................................................... 6

STORAGE................................................................... 6

CONTROL AND SAFETY DEVICES............................... 6

MAINTENANCE.......................................................... 6

TROUBLESHOOTING: ................................................ 8

PARTS LIST AND DIAGRAM .................................... 10

WIRING DIAGRAM .................................................. 12

WARNING: NOT FOR HOME OR

RECREATIONAL VEHICLE USE

IMPORTANT: READ THIS OWNER’S MANUAL CAREFULLY AND COMPLETELY BEFORE TRYING

TO ASSEMBLE, OPERATE, OR SERVICE THIS HEATER. IMPROPER USE OF THIS HEATER CAN

CAUSE SERIOUS INJURY OR DEATH FROM BURNS, FIRE, EXPLOSION, ELECTRICAL SHOCK,

AND/OR CARBON MONOXIDE POISONING.

DANGER: CARBON MONOXIDE

POISONING MAY LEAD TO DEATH. USING A

PORTABLE HEATER IN AN ENCLOSED AREA

CAN PRODUCE DEADLY CARBON MONOXIDE.

THE STATE OF CALIFORNIA REQUIRES THE

FOLLOWING WARNING:

WARNING: This product can expose you to

chemicals including lead and lead compounds,

which are known to the State of California

to cause cancer and birth defects or other

reproductive harm. For more information visit

www.P65Warnings.ca.gov

WARNING: FIRE, BURN, INHALATION,

AND EXPLOSION HAZARD. KEEP SOLID

COMBUSTIBLES, SUCH AS BUILDING

MATERIALS, PAPER, OR CARDBOARD A

SAFE DISTANCE AWAY FROM THE HEATER.

AS RECOMMENDED BY THE INSTRUCTIONS

NEVER USE THE HEATER IN SPACES WHICH

DO OR MAY CONTAIN VOLATILE OR

AIRBORNE COMBUSTIBLES, OR PRODUCTS

SUCH AS GASOLINE, SOLVENTS, PAINT

THINNER, DUST PARTICLES, OR UNKNOWN

CHEMICALS.

CARBON MONOXIDE POISONING:

Early signs of carbon monoxide poisoning

resemble the flu, with headaches, dizziness,

or nausea. If you have these signs, the heater

may not be working properly. Get fresh air

at once! Have heater serviced. Some people

are more affected by carbon monoxide than

others. These include pregnant women,

persons with heart or lung disease or anemia,

those under the influence of alcohol, and

those at high altitudes.

GENERAL HAZARD WARNING:

ONLY PERSONS WHO CAN UNDERSTAND

AND FOLLOW THE INSTRUCTIONS SHOULD

USE OR SERVICE THIS HEATER.

Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters 3

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

SPECIFICATIONS

CLEARANCES TO COMBUSTIBLES

Clearances between these HEATSTAR PRO

radiant heaters and adjacent combustible

material (which is part of the building or its

contents) shall not be less than:

Top: 5ft (1.5m)

Sides: 5ft (1.5m)

Front: 8ft (2.5m)

IF YOU NEED ASSISTANCE OR HEATER INFORMATION SUCH AS AN INSTRUCTIONS MANUAL,

LABELS, ETC. CONTACT THE MANUFACTURER.

MODEL HSP60R HSP125R/HSP150R

Heat Input 58 kBTU/hr Low: 95 kBTU/hr / 102 kBTU/hr

High: 126 kBTU/hr / 150 kBTU/hr

Fuel Types • #1 or #2 Fuel Oil

• K-1 Kerosene

• #1 or #2 Fuel Oil

• K-1 Kerosene

Fuel Consumption 0.43 gal/hr Low: .67 gal/hr / 0.72 gal/hr

High: .89 gal/hr / 1.06 gal/hr

Tank Capacity 2.9 gal 14 gal

Danfoss Nozzle Capacity: 0.40 gal/hr

Spray Angle: 80°

Spray Pattern: Solid

Capacity: 0.65 gal/hr / 0.75 gal/hr

Spray Angle: 80°

Spray Pattern: Solid

Pump Pressure 140 psi Low: 140 psi

High: 200psi

Power Supply 1 Phase, 120V, 60Hz, 1.25A 1 Phase, 120V, 60Hz, 1.25A

Dimensions 24” x 15” x 23” 37.5” x 27.5” x 39.5”

Dry Weight 39 lb 110 lb

Full Weight (Diesel): 60 lb 210 lb

These HEATSTAR PRO radiant heaters run on

diesel fuel. Unlike convection heaters, which blow

hot air into the room to circulate, an infrared

heater uses radiation to efficiently heat bodies

that the heater is pointed at. Airflow, supplied

by the internal burner fan, is necessary to ensure

proper combustion. The fuel flow is controlled by

an electric pump, which sucks the fuel up from

the tank and moves it to the nozzle under high

pressure. Combustion heats a ceramic insulation

chamber which aims directional infrared heat in

the direction which the heater is pointing.

THEORY OF OPERATION

PRECAUTIONS

Caution: When using Thermostat, heater

can start unexpectedly. Turn heater off when

unattended.

WARNING:

• DO NOT USE GASOLINE, NAPHTHA OR

VOLATILE FUELS.

• STOP HEATER BEFORE ADDING FUELS.

• ALWAYS FILL OUTDOORS AWAY FROM

OPEN FLAME

• DO NOT OPERATE HEATER WHERE

FLAMMABLE LIQUIDS OR VAPORS MAY BE

PRESENT

• DO NOT START HEATER WHEN EXCESS

FUEL HAS ACCUMULATED IN THE

CHAMBER

• DO NOT PLACE COOKING UTENSILS ON

TOP OF THE HEATER.

• PLUG ELECTRICAL CORD INTO A PROPERLY

GROUNDED THREE-PRONG RECEPTACLE.

4Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

Please observe the following precautions

when operating your HEATSTAR product.

1. Check the heater thoroughly for damage. DO

NOT operate a damaged heater.

2. Only a qualified service person should service

and repair heater.

3. Before using the heater, read and understand

all instructions and follow them carefully. The

manufacturer is not responsible for damages

to goods or persons due to improper use of

units.

4. Operate only on a stable, level surface.

5. Position the heater such that it is it not

directly exposed to water spray, rain and/

or dripping water. Heater intended for dry

ambient use only.

6. Not suitable for operation with external tank.

7. Check that fire-fighting equipment is available

and suitable to the potential of the heater.

8. The use of the unit shall be in accordance

with the regulations and legislation of

authorities having jurisdiction.

9. Make sure heater is always under surveillance

and keep children and animals away from it.

10. Do not operate the unit in close proximity to

combustible surfaces or materials.

11. Heaters used near tarpaulins, curtains or

other similar covering materials must be kept

at a safe distance. It is advised to use fire-

proof covering material.

12. Only use heaters in well-ventilated areas.

Set-up a suitable open and ventilated area,

with the purpose of introducing fresh air

from outdoors, in compliance with the

current safety standards. This is necessary to

prevent a deficiency in oxygen supply. Refer

to “FRESH AIR AND VENTILATION” on page

4 for specific details.

13. Heaters must be powered only with the

correct voltage and frequency values as

specified on the heater’s identification plate

or specifications table.

14. Keep all air inlet (rear) and air outlet (front)

clear, free of debris or any blockage.

15. Do not start the heater when the chamber is

hot.

16. Do not attempt to use heater to cook or

warm food.

17. Use original spare parts when replacing the

burner, strictly complying with indications

regarding capacity, type of nozzles and pump

pressure. An increase in burner power could

damage the heater.

18. Turn off and unplug heater and let cool

before servicing or transporting.

19. Unplug heater when not in use.

UNPACKING & ASSEMBLY

UNPACKING

1. Remove all protective material which may

have been applied to the heater for shipment.

2. Remove all the components from the box.

3. Check the heater for possible shipping

damage. If any damage is found immediately

contact the manufacturer at 866-447-2194.

HSP60R ASSEMBLY

The HSP60R is packaged with a handle and 2

attachment screws. Use the screws to fasten the

handle to the top of the unit. Note: Do not over

tighten the screws as they can crack the handle.

HSP60R WHEEL KIT F105156

The HSP60R can be attached to optional wheel

kit F105156, not included. The wheels and

bar handles provide an additional method of

convenient handling and transport of the unit,

and keeping the fuel tank raised helps prevent

rough terrain from potentially damaging the

base of fuel tank. Instructions for attachment of

HSP60R to the trolley are provided in the kit.

WARNING: The packaging material is not a

toy. Keep the plastic bag out of the reach of

children; danger of suffocation!

FRESH AIR AND VENTILATION

A rough estimate of minimum opening for

ventilation to support heater operation is 1in²

for each 1,000 BTU of the heater. Please refer to

the table below to determine the approximate

minimum required

opening for

ventilation of space

containing the

heater unit.

FRESH AIR REQUIREMENTS

HSP60R 0.48 ft²

HSP125R/150R (low) 0.66 ft²

HSP125R/150R (high) 0.875 ft²

Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters 5

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

OPERATION

BEFORE SWITCHING HEATER ON

Before any attempt of starting the heater

is made, familiarize yourself with warnings,

specifications and precautions page 2 - 4.

• Check that the fuel is appropriate. Check

that there is sufficient fuel in the fuel tank by

reading the fuel gage embedded near the fuel

filter. If not already closed, close the tank cap

by rotating it clockwise. It is recommended

to use winter diesel oil below ambient

temperatures of 41 °F.

• Check that minimum safety clearances from

combustibles, page 3, is achieved in all

directions

• Check that your electrical supply and any

extension cable can meet the requirements

listed in the specifications table.

WARNING: Not suitable for use on wood

floors or other combustible materials.

FIGURE 1: HSP60R CONTROL PANEL

ERROR DISPLAY

OPERATION LED

THERMOSTAT CAP

THERMOSTAT

SOCKET

ON/OFF SWITCH

FIGURE 2: HSP125R/HSP150R CONTROL PANEL

ERROR DISPLAY

OPERATION LED

THERMOSTAT CAP

THERMOSTAT

SOCKET

ON/OFF SWITCH

RATE CONTROL

TURNING ON THE HEATER

Refer to Figure 1 for the layout of the HSP60R,

and Figure 2 for the layout of the HSP125R/

HSP150R control panels. The heater turns on by

flipping the power switch from “OFF” to “ON”.

The burner box will begin firing, which will heat

up the combustion chamber. Within 30 seconds

the blower fan will activate. The HSP125R/

HSP150R may be toggled between low rate, ,

95,000 BTU/hr (HSP125R)/102,000 BTU/hr

(HSP150R) and high rate, , 126,000 BTU/hr

(HSP125R)/150,000 BTU/hr (HSP150R). These

settings are controlled by the rate control switch,

adjacent to the ON/OFF switch.

THE EXTERNAL THERMOSTAT SOCKET

The heater can only work automatically when a

control device, such as a thermostat or a timer,

is connected to the heater. F105106, a 33ft

digital Thermostat, and F105108, a 33ft analog

thermostat are both approved for use by the

manufacturer. Connection to the heater is made

by removing the thermostat socket cap and

connecting the room thermostat to the socket.

If no room thermostat will be connected the cap

must be inserted into the socket.

SWITCHING OFF THE HEATER:

The heater turns off by flipping the power switch

from “ON” to “OFF”. The burner box will turn

off, and the fan will continue running to cool off

the burner box. Do not unplug the heater until

this cooling cycle has totally ended. This may take

up to 5 minutes. Once the heater has completely

cooled down and the unit is unplugged, ensure

that the fuel tank cap is properly closed to

prevent fuel leakage during transport and/

or storage. To keep the heater in the best

possible conditions, store the heater in a dry and

safe place after carrying out the procedure in

”CLEANING THE FUEL TANK” on page 7.

RESETTING THE HEATER

The appliance stops when an anomaly occurs.

If the reset button turns on with a steady red

light it means the heater needs to be reset. To

reset the heater, press the reset button all the

way down. Identify and remove the cause that

stopped the appliance (for instance, obstruction

of air intake and/or outlet, obstruction to the free

rotation of fan, etc.). Please contact an appointed

service center for assistance.

WARNING: We cannot anticipate every use

which may be made of our heaters. CHECK

WITH YOU LOCAL FIRE SAFETY AUTHORITY IF

YOU HAVE QUESTIONS ABOUT APPLICATIONS.

6Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

MAINTENANCE

WARNING:

Never service heater while it is plugged in,

operating or hot. Severe burns or electrical

shock can occur.

Adherence to the preventive maintenance

schedule on page 7 will ensure a long trouble

free life to your heater.

TRANSPORTATION

IN ORDER TO KEEP THE HEATER IN THE BEST

POSSIBLE CONDITIONS, WE RECOMMEND FOL-

LOWING THE PROCEDURE BELOW:

Clean the fuel tank by the method described in

“MAINTENANCE” on page 6.

Place the heater in a dry place away from poten-

tial external damage.

Before heater is moved it must be stopped and

unplugged. Before moving the heater wait until

it has totally cooled off and make sure fuel tank

cap is securely fixed.

HSP125R/HSP150R TRANSPORTATION FEATURES

The HSP125R/HSP150R can be easily handled by

the wheels and handles. To maneuver the heater

more easily:

• Release the handles from their closed position

(pull the locking pins outwards, Figure 3)

• Lock the handles in a handling position.

• Move the heater by lifting the handles and

making it roll on its wheels.

• After the heater has been moved into desired

position, put the handles back into their closed

position.

FIGURE 3: HSP125R/HSP150R TRANSPORT HANDLES

It is possible to lift and move the heater from the

specified anchoring points:

HSP60R TRANSPORTATION FEATURES

The handle on top of the HSP60R barrel is

suitable for convenient carry by hand. Accessory

F105156 is an optional wheel kit for the HSP60R

approved by the manufacturer.

FIGURE 4: HSP125R/HSP150R HANGING HOOKS

CONTROL AND SAFETY DEVICES

FLAME CONTROL EQUIPMENT

The electronic control box coordinates the

operation between the fuel solenoid valve,

which blocks or allows flow of fuel to the spray

nozzle, and the photocell, which detects the

light intensity (or absence) of a flame. The

coordination of flame brightness and fuel control

allows for stable flame conditions.

ELECTRODES

Fastened directly on the plate of the combustion

chamber, the generated spark between

electrodes ignites the fuel mixture.

SAFETY THERMOSTAT

The high limit safety thermostat blocks machine

operation when malfunctioning occurs. The

safety thermostat is normally a closed electrical

switch.

STORAGE

Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters 7

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

COMPONENT MAINTENANCE FREQUENCY MAINTENANCE PROCEDURE

Fuel tank Clean every 150-200 hours of operation or

when necessary

Empty and rinse the tank with

clean fuel (see below)

Fuel filters Clean or replace twice per season or as

required (make sure they are intact)

Clean fuel filter(s) with clean fuel

(see below)

Nozzle Clean or replace once per season or as

required (make sure they are intact)

Contact a technical service

center. Service of these

components should only be

performed by a qualified

serviceman. Qualified service

professionals may contact the

manufacturer for a service

manual.

Photocell Clean once per season or when necessary

Ignition device Clean or replace every 1,000 hours of

operation or when necessary

Fan blades Clean as required

CLEANING THE FUEL TANK

(HSP125R/HSP150R)

Empty any fuel already in the tank by setting up

an appropriate container for catching the fuel

below the drain plug under the heater. Remove

the 3/4 inch round head drum plug drain cap

at the bottom of the tank (Figure 5) and catch

the fuel. Remove any residue in the fuel tank by

pouring in clean fuel and rinsing the tank again.

Dispose of the fuel in an appropriate container in

accordance with the current safety regulations.

Reattach the drain plug and the fuel tank cap.

CLEANING THE FUEL TANK FILTER

• (Figure 7) Remove fuel tank cap A

• Take the filter B out from the tank

• Clean the filter with clean fuel, without

CLEANING THE FUEL TANK (HSP60R)

Empty any fuel already in the tank by setting up

an appropriate container for catching the fuel,

then remove the fuel tank cap and fuel tank filter

and tip the unit such that the tanks contents are

poured into the disposal container. Remove any

residue in the fuel tank by pouring in clean fuel

and rinsing the tank again. Dispose of fuel in

an appropriate container in accordance with the

current safety regulations. Reinsert the fuel tank

filter and fuel tank cap.

FIGURE 5: HSP125R/150R FUEL DUMP

CLEANING THE INTAKE FUEL FILTER

(HSP125R/HSP150R)

The filter assembly (Figure 6) of the HSP125R/

HSP150R model can be cleaned by the following

procedure:

• Unscrew the fuel filter cup A.

• Take out the filter B from the cup. Keep

gaskets C for later use.

• Clean the filter B with clean fuel and

compressed air, without damaging it.

• Put the filter back in the cup

• Put the cup back on, reassembling the gaskets

correctly.

FIGURE 6: HSP125R/150R INTAKE LINE CUP FILTER

damaging it

• Put the filter

back into the

tank

• Close the cap.

FIGURE 7: FUEL TANK FILTER

8Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

TROUBLESHOOTING:

ERROR CODE /

TYPE POSSIBLE CAUSE REMEDY

/ OPERATION

ERROR

The “ON/OFF” switch is turned

“ON” (I) when the heater is

plugged in

After disconnecting the heater, see that the

switch is in the “OFF” (O) position, plug the

heater in and turn the switch “ON” (I)

/ PHOTOCELL

ERROR

No Fuel Turn the switch “OFF” (O) then refill the fuel

tank

Fuel is contaminated Turn the switch “OFF” (O). Clean the filter

using clean fuel then empty and refill the fuel

tank. See “MAINTENANCE” on page 6.

Photocell is dirty or damaged Contact the technical service center

Fuel filter is dirty See “MAINTENANCE” on page 6.

Ignition error Contact the technical service center

/ TEMPERATURE

CONTROL

SENSOR ERROR

Interrupted cable Contact the technical service center

Sensor is damaged Contact the technical service center

/ THERMOSTAT

ERROR

Internal heater overheating Turn the heater off, wait until it is cooled

down.

Anti-tilting sensor activation Place the heater on a level and stable surface

/ INCORRECT

VOLTAGE

Incorrect voltage Check voltage of electric supply system

/ NO SWITCH-ON

AFTER THREE

ATTEMPTS

No fuel 1) Turn the switch to the “OFF” (O) position.

2) Push the RESET button.

3) UNPLUG the heater.

4) Plug the heater in, then follow normal

start up procedure. If unit remains inoperative

contact technical service center.

Dirty fuel filter

Dirty of defective photocell

Dirty or defective nozzle

Anti-tilting sensor trip

DISPLAY ERRORS

Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters 9

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

HEATER

DOESN’T

RUN

Safety Control Activated 1. Reset the heater

2. Identify the display error and correct, see “DISPLAY

ERRORS” on page 8.

The power switch is in the

“OFF” (O) position

Turn the switch “ON” (I)

No power 1. Insert the power plug into the extension cord

correctly.

2. Check voltage of your electric supply system.

3. Remove control panel and check fuse

Wrong thermostat setting Set the thermostat to a temperature higher than the

ambient room temperature

Temperature sensor override 1. Wait at least ten minutes then attempt normal start

up procedure.

2. Contact the technical service center.

Fuse damaged Contact the technical service center.

Motor and

pump runs

but the

flame does

not start

No fuel Turn off the heater, refill the fuel tank, then restart the

heater

Ignition Device is dirty Contact the technical service center

Fuel filter is dirty Clean the filter using clean fuel, see “MAINTENANCE”

on page 6.

Nozzle is dirty Contact the technical service center

Photocell is dirty, damaged or

installed improperly.

Contact the technical service center

External substances present in

the tank

Empty and refill the fuel tank with clean fuel, see

“MAINTENANCE” on page 6

Electrodes are used up or

placed at an improper distance

Contact the technical service center

Flan

blocked or

spins too

slowly

Engine damaged Contact the technical service center

TROUBLESHOOTING CONTINUED: DEFICIENT BEHAVIOR

10 Installation Instructions and Owner’s Manual

Portable Radiant Oil-Fired Industrial Heaters

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

HSP60R

BURNER

PARTS LIST AND DIAGRAM

HSP60R

# P/N PART DESCRIPTION

1 51050 SAFETY THERMOSTAT

2 51261 FUEL LINE

3 51201 FUEL LINE

4 51227 FUEL LINE + NUT

5 51240 FUEL FILTER

6 51226 FUEL GAUGE

7 51243 TANK FILTER

8 51141 TANK CAP

9 51202 FAN

10 51234 VENTILATION MOTOR

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only

parts specifically approved with this heater may result in property damage or personal injury.

NOTE: Not all parts available. For questions contact manufacturer.

This manual suits for next models

Table of contents

Other HeatStar Heater manuals

HeatStar

HeatStar HSSVFRD30NGBT Assembly instructions

HeatStar

HeatStar HS35LP User manual

HeatStar

HeatStar MH4B Assembly instructions

HeatStar

HeatStar HS22LP Assembly instructions

HeatStar

HeatStar HSP500ID-A Manual

HeatStar

HeatStar THP750S User manual

HeatStar

HeatStar HS200CVX Assembly instructions

HeatStar

HeatStar HS35CLP Assembly instructions

HeatStar

HeatStar HS80CVNG Assembly instructions

HeatStar

HeatStar HSP70ID Assembly instructions

HeatStar

HeatStar HS60CLP Assembly instructions

HeatStar

HeatStar HS4000 NG/LP Assembly instructions

HeatStar

HeatStar HS55FAV Assembly instructions

HeatStar

HeatStar HS100CVNG Assembly instructions

HeatStar

HeatStar HSU200NG Assembly instructions

HeatStar

HeatStar HSP400ID-G Assembly instructions

HeatStar

HeatStar ERSP-40 Assembly instructions

HeatStar

HeatStar ER2STG 80-125 Assembly instructions

HeatStar

HeatStar 4000IDG-HD Assembly instructions

HeatStar

HeatStar HS115IR Assembly instructions

HeatStar

HeatStar HSU100NGPALP Assembly instructions

HeatStar

HeatStar HS4030 Assembly instructions

HeatStar

HeatStar HSU50NG Assembly instructions

HeatStar

HeatStar HS400FAVT Assembly instructions

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide