Heatmiser Touch Series User manual
1Model: PRT2-TS / PRT2-NTS EU
Model: Touch Duo
Model: Touch Duo
TouchScreen Series
1
Model: Touch Duo
TouchScreen Series
1Touch Series
1
Model: Touch Duo 2
2Model: PRT2-TS / PRT2-NTS EU
1
2
3-4
5-6
7-8
9
10
11-12
13
13
Product Image
Table of Contents
What is a Programmable Room
Thermostat?
Installation Procedure
LCD Display
Setting the Clock
Temperature Display
Comfort Levels Explained
Clean Screen
Locking the Keypad
14
15
16
17
18
19-20
21
22
23
24
25
Temperature Control
Temperature Hold
Holiday Programming
Frost Protection
Heating ON/OFF
Optional Features Explained
Adjusting the Optional Settings
Optional Settings - Features Table
Re-calibrating the Thermostat
Factory Reset
Error Codes
26Wiring Diagram
Model: PRT2-TS / PRT2-NTS EU
Table Of Contents
2
3 TouchScreen Series
What is a Programmable Room Thermostat?
A programmable room thermostat is both a programmer and a room thermostat.
The room thermostat works by sensing the air temperature, switching on the heating
this set temperature has been reached.
So a programmable room thermostat lets you choose what times you want the heating
to be on, and what temperature it should reach while it is on. It will allow you to select
to meet your particular needs and preferences.
Setting a room thermostat to a higher temperature will not make the room heat up
any faster. How quickly the room heats up depends on the design & size of the heating
system.
down. Setting a programmable room thermostat to a lower temperature will result in the
room being controlled at a lower temperature, and saves energy.
chosen, and then leave it alone to do its job.
Touch Series
3
4Model: PRT2-TS / PRT2-NTS EU
What is a Programmable Room Thermostat? The best way to do this is to set the room thermostat to a low temperature
– say 18°C , and then turn it up by 1°C each day until you are comfortable with the
temperature. You won’t have to adjust the thermostat further. Any adjustment above
this setting will waste energy and cost you more money.
If your heating system is a boiler with radiators, there will usually be only one
programmable room thermostat to control the whole house. But you can have
(TRVs) on individual radiators.
If you don’t have TRVs, you should choose a temperature that is reasonable for the
whole house. If you do have TRVs, you can choose a slightly higher setting to make
sure that even the coldest room is comfortable, then prevent any overheating in other
rooms by adjusting the TRVs.
You are able to temporarily adjust the heating program by overriding or using the
temperature hold feature. These features are explained further on pages 14 and 15 of
this manual.
so they must not be covered by curtains or blocked by furniture. Nearby electric
properly.
Model: Touch Duo 4
Touch Series
5
5 TouchScreen Series
Installation Procedure
back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the thermostat from the back plate by placing a
Step 2
Place the thermostat front somewhere safe.
Terminate the thermostat as shown in the diagrams on page 25 of this booklet.
Step 3
Screw the thermostat back plate securely into the back box.
Step 4
Clip the front of the thermostat back onto the thermostat back plate.
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not push hard on the LCD screen as this may cause irreparable damage.
6Model: PRT2-TS / PRT2-NTS EU
1 2
3 4
Installation Procedure
Model: Touch Duo 6
7TouchScreen Series
14
32 5
9
18
17
13
6
10
11
12
16
19
7
14
15
8
Touch Series
7
8Model: PRT2-TS / PRT2-NTS EU
18
17
1. Day Indicator - Displays the day of the week.
2. Holiday Indicator - Displayed when the thermostat is in Holiday mode.
3. Temperature Hold - Displayed when the thermostat is in Hold mode.
4. Clock - Displays time in normal operation, time left in hold or days left in
holiday mode.
5. Up/Down Keys - Increase or decrease values shown on top digit group.
6.
7. Keypad Lock Icon - Displayed when the keypad is locked.
8. Zone Selection Keys - Used to select zone to view/control.
9. Frost Icon - Displayed when the thermostat is in frost protection mode.
10. Room Temp - Indicates the current temperature sensor mode.
11. Set - Indicates when changes are being made to programs or temperature set points.
12. Clean Screen - Freezes screen temporarily to enable cleaning.
13. Up/Down Keys - Increase of decrease values shown on bottom digit group.
14. Power Key - Single press to enable/disable frost protection mode or press and hold to
15. Cancel Key - Used to exit setup/program operations.
16. Setup/Programming Keys - Used to navigate setup options.
17. Current Temp - Indicates the current sensor temperature.
18. Units of Temperature - Degrees Celsius or Fahrenheit.
19. Comfort Level Selection Keys - Used in comfort level setup (see page 11).
LCD Display
19
Model: Touch Duo 8
9TouchScreen Series
To set the clock, follow these steps.
• Press PROG ................................................................................................................
• Press CLOCK ..............................................................................................................
• Use the Down key to set the hours ..................................................................
• Use the Up key to set the minutes ...................................................................
• Use the Day key to set the day of the week ..................................................
• Press DONE to conrm and exit ........................................................................
Setting the Clock
Hours
Change Hours
Minutes
Day
Change Minutes
9 TouchScreen Series
To set the clock, follow these steps.
• Press PROG ................................................................................................................
• Press CLOCK ..............................................................................................................
• Use the Down key to set the hours ..................................................................
• Use the Up key to set the minutes ...................................................................
• Use the Day key to set the day of the week ..................................................
• ........................................................................
Setting the Clock
Hours
Change Hours
Minutes
Day
Change Minutes
Touch Series
9
Other manuals for Touch Series
1
This manual suits for next models
1
Table of contents
Other Heatmiser Thermostat manuals
Heatmiser
Heatmiser PRT-EN1 Slimline Series User manual
Heatmiser
Heatmiser PRT-WTS User manual
Heatmiser
Heatmiser HC User manual
Heatmiser
Heatmiser DT-ETS WiFi RF User manual
Heatmiser
Heatmiser TM1-TS WiFi RF User manual
Heatmiser
Heatmiser PRT-EWTS User manual
Heatmiser
Heatmiser Touchpad (TFT) User manual
Heatmiser
Heatmiser DT User manual
Heatmiser
Heatmiser DS1-EL User manual
Heatmiser
Heatmiser DT-W User manual
Heatmiser
Heatmiser DT-TS WiFi RF User manual
Heatmiser
Heatmiser Touch Series User manual
Heatmiser
Heatmiser Wireless Series User manual
Heatmiser
Heatmiser PRT-EW User manual
Heatmiser
Heatmiser PRT-UWTS User manual
Heatmiser
Heatmiser DT-B User manual
Heatmiser
Heatmiser DS1 User manual
Heatmiser
Heatmiser NeoAir V2-M User manual
Heatmiser
Heatmiser edge User manual
Heatmiser
Heatmiser UH1-W Quick start guide
