Hay PC Table Series User manual
PC TABLE
By Pierre Charpin
INSTRUCTION MANUAL
Pierre Charpin’s PC Table Lamps is a collection of refined
freestanding tabletop lamps. The lamps are constructed
in anodised aluminium and feature a subtle sheen finish.
The light source is hidden from view by a removable
polycarbonate moulded diffuser, creating both a soft
directional downlight effect as well as the form of the lamp
itself. The Table Lamps are available in different sizes and
a variety of variety of colours, and are suitable for both
contract and domestic markets.
INTRODUCTION
This product is fitted with an E27 bulb fitting. HAY
recommends using this product with a dimmable LED
bulb, max. 13W. HAY will not accept any responsibility for
any accidents or injuries that occur due to the use of
incorrect bulbs.
TECHNICAL DATA
The product can be cleaned with a soft damp cloth and
mild detergent. Do not use alcohol or any other solvents
to clean the product. The external flexible cable or cord
of this luminaire cannot be replaced; if the cord is
damaged, the luminaire should be destroyed. Ensure that
the power supply has been turned OFF before cleaning
the product.
CARE AND MAINTENANCE
In some countries, electrical installation must be carried
out by authorised electricians/contractors; please check
with your local authority for guidance. The product must
not be modified in any way. HAY accepts no responsibility
for any products that have been modified or tampered
with. This lamp is designed for indoor use only.
ATTENTION
PARTS
1.
Unpack all the components and check that you have received all of
the components listed above.
Hold the flat diffuser with both hands and twist into place, ensuring it
is securely fitted to the lamp body.
2.
Ensure that the power is off and the lamp is not plugged in.
Screw an E27 bulb into the bulb fitting. It is advised that a dimmable
LED bulb, no more than 13W is used in this lamp.
3.
Once the bulb is in place, place the lampshade onto the lamp base,
aligning the grooves in the metal ring in the shade with the bayonet
fitting on the lamp base. Turn clockwise and tighten securely.
4.
Place the lamp onto a flat, stable surface.
5.
For UK customers, insert the EU plug into the converter provided.
Close the converter over the EU plug with the pins secured in the
internal spring clip contacts. Screw the converter together to ensure
the UK plug is secure.
6.
Connect the cable to a power supply. The lamp is now ready to be used. The lamp
has a two-step dimmable feature, which can be controlled by touching the lamp
base. First touch sets it to low brightness and second touch sets it to maximum
brightness. Third touch will turn the lamp off again.
100% 50%
This manual suits for next models
2
Table of contents
Other Hay Home Lighting manuals
Hay
Hay PC TABLE LAMP User manual
Hay
Hay CLOCHE User manual
Hay
Hay PC PORTABLE User manual
Hay
Hay LBM TABLE LAMP User manual
Hay
Hay MATIN WALL User manual
Hay
Hay Matin Floor User manual
Hay
Hay FIFTY-FIFTY WALL User manual
Hay
Hay APOLLO PORTABLE User manual
Hay
Hay NOC CLAMP User manual
Hay
Hay ARCS SHADE User manual
