Haussmann N1F-GT-300 User manual
N1F-GT-300 / 5.0-A
Model/Modèle: 59595079
Manuel de l'utilisateur (p.14)
Electric Grass Trimmer
Operator’s Manual (p.2)
Coupe-herbe électrique
Customer Service / Service à la clientèle: 1-866-206-0888
Notre personnel du service à la clientèle est disponible pour vous aider. Pour obtenir de l’aide pour le montage de votre produit, pour signaler des
pièces endommagées ou manquantes, ou pour toute autre information, veuillez composer notre numéro sans frais: 1-866-206-0888.
Our Customer service staff is available to help you. For help with product assembly, to report damaged or missing parts, or for
any other information, please call our toll-free number: 1-866-206-0888.
Enregistrez votre produit
Nous vous invitons à enregistrer votre produit en ligne afin de faciliter les communications; pour ce faire, veuillez visiter le www.outilshaussmann.com
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les règles de sécurité, le fonctionnement et la garantie. Conservez-le avec votre facture d'origine dans un endroit sûr au
sec pour référence future.
Register your product
We invite you to register your product online to make future communications easier. To do so, simply visit our website www.haussmanntools.com.
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future
reference.
Fig.1
Parts list
1. Switch lock button
2. On/off Switch
3. Handle
4. Cord hook
5. Cord & plug
6. Captive nut
7. Auxiliary handle
8. Locking lever
9. Extension tube knob
10. Shroud
11. Push button
12. Protective hood
13. Safety guard
14. Spool
Nomenclature des pièces
1. Bouton de verrouillage de l’interrupteur
2. Interrupteur marche/arrêt
3. Poignée
4. Crochet de cordon
5. Cordon et fiche
6. Écrou captif
7. Poignée auxiliaire
8. Levier de blocage
9. Bouton de tube télescopique
10. Couvercle de protection
11. Bouton-poussoir
12. Capot de protection
13. Protecteur
14. Bobine
2
TABLE OF CONTENTS
ENGLISH
SAFETY SYMBOLS
Safety symbols…………………………………………………………………
Safety instructions ………………………………………………………………
Application
Technical data
Assembly
Operation
Maintenance
Warranty
Parts List
Schematic Drawing
p.2
p.3
p.5
p.6
p.6
p.7
p.10
p.12
p.13
.................................................................................................
............................................................................................
...................................................................................................
....................................................................................................
..............................................................................................
...................................................................................................
....................................................................................................
Please read all of the safety and operating instructions carefully before
using this tool. Please pay particular attention to all sections of this user
manual that carry warning symbols and notices.
p.14.....................................................................................
Warning
Read operator’s manual
Wear eye and ear protection
Do not expose and operate the tool in rain.
Remove the plug from the mains immediately if cable
is damaged or cut.
Keep all bystanders at least 50 ft (15 m) away.
3
SAFETY INSTRUCTIONS
ENGLISH
!
WARNING! Read all safety warnings and instructions. When using electric
grass trimmer,basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury.
SAFETY PRECAUTIONS
Please read this manual carefully prior to operating the grass trimmer. It contains
important safety, maintenance and operating instructions. Read these
instructions thoroughly even if you are already familiar with trimmer use.
OPERATOR SAFETY
- Do not operate the grass trimmer when you are tired, ill or under the influence
of medication, alcohol or drugs.
- Always wear a safety face shield or goggles that meet ANSI Z87.1
requirements.
- Always wear safety protective equipment such as snug fitting clothing (jacket,
pants) gloves, boots with steel toe caps and non-slip soles. Lawn mower chaps
add a layer of safety. Do not wear shorts, loose clothing, scarves, jewelry,
sandals, or go barefoot.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your 120V operated (corded)
grass trimmer.
a) FOR ALL DOUBLE-INSULATED APPLIANCES
1) Replacement Parts
When servicing use only identical replacement parts.
2) Polarized Appliance Connections
To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other) and will require the use of a polarized
extension cord. The appliance plug will fit into a polarized extension cord
only one way. If the plug does not fit fully into the extension cord, reverse
the plug. If the plug still does not fit, obtain a correct polarized extension
cord. A polarized extension cord will require the use of a polarized wall
outlet. This plug will fit into the polarized wall outlet only one way. If the
plug does not fit fully into the wall outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician to install the proper wall outlet.
Do not change the equipment plug, extension cord receptacle, or
extension cord plug in any way.
b) FOR ALL APPLIANCES
1) Avoid Dangerous Environment – Don’t use appliances in damp or wet
locations.
2) Don’t Use In Rain.
3) Keep Children Away – All visitors should be kept at a distance from work area.
4) Dress Properly – Do not wear loose clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is recommended
when working outdoors. Wear protective hair covering to contain long hair.
WARNING! To reduce the risk of electric shock, use only with an extension cord
intended for outdoor use, such as an extension cord of cord type SW-A, SOW-A,
STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A. or SJTOW-A.
4
SAFETY INSTRUCTIONS
ENGLISH
5) Use Safety Glasses – Always use face or dust mask if operation is dusty.
6) Use Right Appliance – Do not use appliance for any job except that for which
it is intended.
7) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the
circuit(s) or outlet(s) to be used for the gardening appliance. Receptacles are
available having built-in GFCI protection and may be used for this measure of
safety.
8) Extension Cord – Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized extension cord will cause a
drop in line voltage resulting in loss of power and overheating. If in doubt, use
the next heavier gauge. The smaller the gauge number, the heavier the cord.
10) Avoid Unintentional Starting – Don’t carry plugged-in appliance with finger
on switch.Be sure switch is off when plugging in.
11) Handle cord carefully – Never carry appliance by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
12) Don’t Force Appliance – It will do the job better and with less likelihood of
arisk of injury at the rate for which it was designed.
13) Don’t Overreach – Keep proper footing and balance at all times.
14) Stay Alert – Watch what you are doing. Use common sense. Do not operate
appliance when you are tired.
15) Disconnect Appliance – Disconnect the appliance from the power supply
when not in use, before servicing, when changing accessories such as
blades, and the like.
16) Keep guards in place and in working order.
17) Keep hands and feet away from cutting area.
To reduce the risk of disconnection of appliance cord from the extension cord
during operating:
i) Make a knot as shown in Fig.2;
ii) Use one of the plug-receptacle retaining straps or connectors described in
this manual.
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. (7.5 m) 18 Gauge
50 Ft. (15 m) 16 Gauge
100 Ft. (30 m) 16 Gauge
SELECT AN EXTENSION CORD
Fig.2
!
5
APPLICATION
TECHNICAL DATA
ENGLISH
O.
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The HAUSSMANN grass trimmer is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that cannot be reached with the
lawn mover.
Check the box contents
Carefully remove the snow thrower from its packaging and check the following
parts are present:
-- grass trimmer
-- safety guard
-- auxiliary handle and tightening bolt
If any parts are missing or damaged, please contact Customer Service at
1-866-206-0888.
Parts list
The numbering of the product parts refers to the illustration of the machine on
page 1 (Fig. 1 ).
1. Switch lock button
2. On/off Switch
3. Handle
4. Cord hook
5. Cord & plug
6. Captive nut
7. Auxiliary handle
8. Locking lever
9. Extension tube knob
10. Shroud
11. Push button
12. Protective hood
13. Safety guard
14. Spool
Product code
Model number
Input voltage rating
Rated current
No load variable speed
Cutting width
Cutting line diam. and length
Net weight
59595079
N1F-GT-300 / 5.0-A
120 V~, 60 Hz
5 AMP
9500 RPM
12" (305 mm)
0.063" x 26´
33.7 lbs (15.3 kg)
6
ASSEMBLY
ENGLISH
Advice
Observe correct mains voltage: The voltage of the power source must match
the voltage specified on the nameplate of the unit.
Fitting Auxiliary Handle(Fig.3)
1. Place your handle on the tool as shown.
2. Adjust handle to the most comfortable position.
3. Pass the handle knob bolt through auxiliary handle. Screw the handle knob
bolt into the captive nut on the far side of the auxiliary handle.
1. Unplug the tool.
2. Remove the screw from the motor housing
3. Put guard in direction of arrow to align with screw hole.
4. Firmly press the guard into place.
5. Secure the guard with screw. Never use the tool unless the guard is properly
fitted.
Fitting the safety guard(Fig.4)
NO.
!WARNING! Ensure during assembly that the power cable is not squeezed and
that it has sufficient play.
!WARNING! The guard must be properly installed. The guard provides partial
protection from the risk of thrown objects to the operator and others.
Fig.3
Fig.4
Fig.5
7
ASSEMBLY
ENGLISH
Adjusting the telescopic tube (Fig.5):
1. Slacken the coupling nut
2. Pull the telescopic tube to the desired length
3. Retighten the coupling nut again
Fig.6
8
Adjusting the angle of cutting head (Fig.6):
1. Press locking lever (8)down and hold
2. Turn the operation handle to the desired position
3. Release locking lever (8)again
The trimmer must be used outdoors only, at an ambient temperature between
0ºC and 45ºC.
!
WARNING! Never use steel, wire, rope, string, or other materials as cutting line,
which can break off and become a dangerous projectile.
Screws
N
!
WARNING! Remove stones, loose pieces of wood and other objects from the
cutting area. The cutting line continues to rotate for a few seconds after the trimmer
is switched off. Allow the cutting line to stop rotating before switching on again.
Do not rapidly switch off and on.
8
OPERATION
ENGLISH
SWITCH ON/OFF
To switch the grass trimmer ON, push and hold the safety button, squeeze the
on/off switch. To switch the grass trimmer off, release the on/off switch.
Replacing the spool kits.
FIRST How to disassemble the spool.
1) Disconnect trimmer from the mains plug.
2) Press together both locking devices (4) at the spool cover (3) and remove
the cover. (Fig.7&8)
3) Remove the spool (2) from the spool cover.(Fig.7&9)
4) Remove the spring.
5) Clean dirt and grass residues.
SECOND How to wind the string.
1) Hook the string in the groove as shown in Fig.10.
2) Wind the string as shown in Fig.11 and hook the two ends in the side
grooves.
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11
9
OPERATION
ENGLISH
Third How to assemble the spool
1) Insert the spring into the shroud and thread the string into the hole
as shown in Fig.14.
Fig.12
Fig.13
Fig.14
Fig.15
Fig.16
3) Firmly place the cover on the spool and pull them approx.9 cm out of the
spool. Fig.12.
4) Along the groove slide the string into the hole in the string cover. Fig.13
5) Prepare to assemble the spool into the trimmer.
2) Place the spool cover (3) on the spring and press it firmly down until the
locking devices (4) of the spool cover (3) securely click into place.Fig.15.
Check length of nylon cutting line (Fig.16)
Trimming Edges
1) Pull line (6) to inner edge of outer guard (8). If the line is too short, i.e.more
than 50mm from inside edge of guard, push down the red button (5) and at the
same time pull the line a few centimeters past the edge of the guard. Remove
trimming blade guard (9). (5)
This manual suits for next models
1
Table of contents
Languages:
Other Haussmann Trimmer manuals
Haussmann
Haussmann GHT610NU User manual
Haussmann
Haussmann 68125135 User manual
Haussmann
Haussmann 02325004 User manual
Haussmann
Haussmann H2TOOLKIT-18 User manual
Haussmann
Haussmann CGT24U User manual
Haussmann
Haussmann 02325006 User manual
Haussmann
Haussmann 8401020 User manual
Haussmann
Haussmann ST05 User manual
Haussmann
Haussmann HLG033 User manual
Haussmann
Haussmann GGT600LU User manual
