Hanna Instruments HI 901 User manual
INSTRUCTION MANUAL
HI 901 / HI 902
AUTOMATIC TITRATOR
NaOHTitrantConc.
StandardizeElectrode
General
OptionsSelect
MethodMethod
OptionsBurettepH/mV
ATCEndpointVolumepH
NoResult
1300/1300RPM
15:44:31Nov12,2003
N(eq/L)
0.0
0
0
NaOH
0.1 M
TABLE OF CONTENTS
Chapter 1. INTRODUCTION
Chapter 2. SETUP
Chapter 3. USER INTERFACE
Chapter . GENERAL OPTIONS
Chapter 5. METHODS
Chapter 6. TITRATION MODE
Chapter 7. pH & mV MODE
Chapter 8. AUXILIARY FUNCTIONS
Chapter 9. MAINTENANCE, PERIPHERALS
Appendix 1. TECHNICAL SPECIFICATIONS
Appendix 2. BACK TITRATION (HI 902 only)
Appendix 3. MULTIPLE EQUIVALENCE POINTS (HI 902 only)
Appendix . ACCESSORIES
Dear customer,
Thank you for choosing a Hanna Instruments Product.
This instruction manual has been written for the HI 901 / HI 902 Titrator roducts.
Please read this instruction manual carefully before using the instrument. This manual will
rovide you with the necessary information for the correct use of the instrument.
© 2004 Hanna Instruments
All rights are reserved. Re roduction in whole or in art is rohibited without the written consent of the co yright
owner, Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode Island, 02895, USA.
1-1
INTRODUCTION
1 INTRODUCTION
HI 901 and HI 902 are automatic titrators with high accuracy, great flexibility and re eatability.
The titrators are designed to erform a variety of otentiometric titrations, allowing the user
to obtain both good results and high s eed analysis.
The main attributes of these titrators are:
Flexibility Su ort u to 100 titration methods (standard and user defined).
High accuracy Precise dosing system (under 0.1% accuracy).
Precise mV and H measurements (± 0.1 mV and ± 0.001 H accuracy).
Inter olated end oint volume.
Re eatability Powerful built-in algorithms for equivalence oint detection (first derivative and second
derivative detection algorithms, filtered derivatives o tion, settable range for equivalence
oint detection).
Fixed end oint mV or H.
Quick results Standard titration methods.
Pre-titration dosing feature.
Dynamic / Linear dosing feature.
Com lete re ort The results are dis layed directly in the selected units.
Titration gra h can be dis layed on line and saved.
User customized re orts can be rinted, saved on flo y disk or transferred to PC via
RS232 interface.
The sam le information and data stam are included in the re ort.
Direct measurements The titrator can also be used for recise mV, H and tem erature measurements.
Re ort of data logging is available for direct measurements.
GLP features U to 5 standardization oints for the H electrode.
Reminders for titrant age and standardization ex iration.
Fields for s ecific annotations.
Large gra hical dis lay 7.5 B/W gra hical dis lay with backlight.
Easy to view text and gra hs.
Lots of information on each screen.
Self diagnosis and Integrated hel is available.
integrated hel Self diagnosis features for eri heral devices including um , valve, burette, stirrer.
Error management with warning and error messages.
Predefined troubleshooting titration methods.
This manual rovides information regarding installation and functionality of the titrator, ointing
out hints and refined o eration suggestions.
Before beginning to work with the titrator it is recommended to become familiar with its
various features.
1-2
INTRODUCTION
2-1
SETUP
Chapter 2. Contents
2 SETUP ................................................................................................... 2-3
2.1 Unpacking ............................................................................................. 2-3
2.2
Safety Measures
................................................................................... 2-
2.3 Installation ........................................................................................... 2-5
2.3.1 Titrator Front View ...................................................
.......
...
..
....
.
.
..............
2-5
2.3.2 Titrator Rear View
........................................................
............................ 2 - 5
2.3.3 Titrator Left-side View ...........................................
.....
.......
.......
...
..............
2-6
2.3.4 Titrator Assembly ...................................................
.....
.......
..
.................... 2 - 6
2.3.4.1 Assembling Stirrer Stand and Su ort ....................................................... 2 - 6
2.3.4.2 Attaching Stirrer ..........................................
........
......
........................... 2 - 7
2.3.4.3 Connecting the Pum ........................................................................... 2 - 8
2.3.4.4 Attaching Burette Blank Su ort ....................
...........
.................
..............
2-9
2.3.4.5 Attaching the Burette ......................................
....................
.................. 2 - 9
2.3.4.6 Electrical Connections ......................................
..............
..
......................
2-10
2.3.5 Connection to Earth ....................................
..............................................
2-11
2.3.6 Flo y Disk Drive ...................................................
.....
.............................. 2-11
2-2
SETUP
2-3
SETUP
2 SETUP
2.1 Unpacking
The titrator and the accessories are shi ed in a single box containing:
ITEM QUANTITY
1 Titrator............................................................................... 1
2 Pum Assembly.............................
...
.................................. 1
3 Burette Assembly................................................................. 1
Burette (with 25 mL syringe)
As iration Tube with Fitting and Protection Tube
Dis ensing Tube with Normal Dis ensing Ti , Fitting,
Protection Tube and Tube Guide
Tube Locks
Tool for Valve Fitting and Burette Ca Removal
Light S ectrum Protection Screen
4 Stirrer Su ort, Stand, Collar and Positioning Screw................ 1
5 Burette Blank Su ort.......................................................... 1
6 Pum and Burette Locking Screws with Plastic Head................ 2
9 Tem erature Sensor.............................................................. 1
10 Shorting Ca ....................................................................... 1
11 Power Cable........................................................................ 1
12 RS232 Cable....................................................................... 1
13 Instruction Manual Binder...................................................... 1
14 Start-u Disk (FDD with Titrator Installation Kit)..................... 1
15 HI 900 PC A lication (FDD with Installation Kit).................... 1
16 Quality Certificate................................................................ 1
See Appendix section A .3 Titrator components for ictures.
If any of the items is missing or damaged, lease contact your sales re resentative.
Note: Save all packing materials until you are sure that the instrument functions correctly.
Any damaged or defective items must be returned in their original packing materials
together with the supplied accessories.
2-4
SETUP
2.2 Safety Measures
The following safety measures must be followed:
1. Always ensure that the ower-su ly cable is connected to a grounded main ower lug.
2. Never connect or disconnect the um assembly with the titrator turned on.
3. Verify that the burette and the attached tubing are as described in this manual (see 9.1
Burette Maintenance section for more details).
4. Always check that the titrant bottle and the titration beaker are firmly sitting on a flat
surface.
5. Always wi e u s ills and s lashes immediately.
6. Avoid the following environmental working conditions:
Severe vibrations
Direct sunlight
Atmos heric relative humidity above 95% non-condensing
Environment tem eratures below 10°C and above 40°C and a normal humidity range
Ex losion hazards
7. Have the titrator serviced only by qualified service ersonnel.
This manual suits for next models
1
Table of contents
Other Hanna Instruments Laboratory Equipment manuals
Hanna Instruments
Hanna Instruments HI 300N User manual
Hanna Instruments
Hanna Instruments HI 4114 User manual
Hanna Instruments
Hanna Instruments HI 300N User manual
Hanna Instruments
Hanna Instruments HI 207 User manual
Hanna Instruments
Hanna Instruments HI 921 User manual
Hanna Instruments
Hanna Instruments HI 4113 User manual
Hanna Instruments
Hanna Instruments HI 93721 User manual
Hanna Instruments
Hanna Instruments HI 931002 User manual
Hanna Instruments
Hanna Instruments HI 2314 User manual
Hanna Instruments
Hanna Instruments HI922 User manual
Hanna Instruments
Hanna Instruments HI 180 User manual
Hanna Instruments
Hanna Instruments HI 84500 User manual
Hanna Instruments
Hanna Instruments HI 903 User manual
Hanna Instruments
Hanna Instruments HI 731312 User manual
Hanna Instruments
Hanna Instruments HI 190 User manual
Hanna Instruments
Hanna Instruments HI931 User manual
Hanna Instruments
Hanna Instruments HI83325 User manual
Hanna Instruments
Hanna Instruments HI 4008 User manual
Hanna Instruments
Hanna Instruments HI6221 User manual
Hanna Instruments
Hanna Instruments HI97705 User manual
Popular Laboratory Equipment manuals by other brands
Agilent Technologies
Agilent Technologies 5800 ICP-OES user guide
Endress+Hauser
Endress+Hauser Cleanfit CPA875 operating instructions
NI
NI PXI-5422 CALIBRATION PROCEDURE
Collomix
Collomix Aqix operating instructions
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series operating manual
Ocean Insight
Ocean Insight FLAME-NIR+ Installation and operation manual
Parker
Parker ALIGN-MG-NA Installation, operation and maintenance manual
BD
BD 644787 user guide
DENTAURUM
DENTAURUM Compact Megaplus Instructions for use
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 instruction manual
VWR
VWR SAS Super IAQ instruction manual
illumina
illumina MiSeqDx reference guide