Haier HWMP50F User manual

Fully Automatic Washing Machine User's manual

This manual is for

HWMP50F

Please read this manual

carefully before using.

Retain it for future

reference.

CONTENTS

CONTENTS the 2nd cover

Names of the parts 1

Safety precautions 2

Installation and adjustment 4

Install the water inlet hose 5

Preparation before washing 6

Put in the laundries 7

Usage of the detergent

Use the operation buttons 8

Finish washing 10

Disposal after washing 11

Trouble-shooting Answer to question 12

Packing list 13

Specification table The back cover

Close the top lid 7

Names of the parts

Contents marked with that symbol are related to the

safety of the product and the personal safety of the

users. Please operate in strict conformity to the

contents, otherwise it may cause damage of the

machine or injure the personal safety of the user.

Contents marked with that symbol are actions forbidden

to perform. Performing of those actions may result in

damage of the machine or injure the personal safety of

the user.

Meaning and description of the symbols

Warning sign

Forbidden sign

Drain bushing

Control pannel

Inner tub

Detergent box

Top lid component

Balance ring

Lint filter

Pulsater

Front control

board

Cabinet

Adjustable leg

Fixed leg

(3 pieces)

Adjustable

leg film

Handle

Drain

protective lid

Water absorption

cushion Hot water valve

Cold water valve

Power cord

Back cover

Safety precautions

The ventilation

holes at the bottom

Soft object

Do not let the machine share one receptacle with

other electric appliances. If the plugging into the

receptacleis loose, do not use the plug any more.

If washing machine is supplied from a cord

extension set or electrical portable outlet device,

no cord extension set or electric portable outlet

device should be positioned so it is not subject to

splashing or ingress of moisture.

Do not wash water-proof

laundries like the raincoat, bike

covers etc. to avoid abnormal

vibrations in spinning.

Do not put the machine at damp place

like the bathroom. Never wash it with

water. Do not put wet laundries on the

control panel.

Do not use water hotter than 60 .

In case the washing machine is installed

on ground with carpet, do not block the

ventilation hole with carpet.

Ensure carpet does not

obstruct the

opening in

the bases.

Please plug the power plug on special

receptacle. Be sure to use three-pins

power receptacle. Ensure that the earthing

prong of the power receptacle is earthed

reliably. Use leakage protector if possible.

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin of the power plug clean,if the power plug is polluted with dust,

please wipe with dry cloth carefully.

If the supply cord is damaged, it must be replaced by

the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

The washing machine must be positioned

so that the plug is accessible. Be sure to pull

the plug off and close the water faucet in

following cases: power failure, delivering

the machine, setting the machine idle or

cleaning the machine.

Do not plug or pull the

power plug with wet

hand.

Earth

Back

Front

Do not put hand into the rotating tub.

It is dangerous even if the rotation

speed is slow. Take special care of the

children. Keep children away from the

washing machine to avoid them climbing

on it.

The appliance is not instruct for use of

young children of infirm persons without

supervision.

Young children

should be

supervised to

ensure that they

do not play with

the appliance.

Do not decompose, repair or alter

the machine byyourself.

Do not putany hot orheavy items

(such as the kettle with hot water) on

the washing

machine.

Do not wash laundries with volatile

materials (such as

thinner,

petrol etc.).

Keep the machine away from

direct sunlight andheat source

like the heater.

The handicapped or children shall

not use the machine without care.

Benzene

Safety precautions

Please check if the water faucet is

open, and if the connection of the

water inlet pipe is proper.

It is suggested to use formless

washing powder.

To prevent the lint in the tub from

blocking the cascade outlet and

influencing the cascadeeffect, please

keep the lint filter in good condition,

and install it to proper position during

washing. If the lint filter is lost or

damaged, please

contact the local

after-sales service

department of our

company.

Toprotect your laundries and

washing machine, please take

out all of the coins, buttons, sand,

hairpin and other

foreign materials

before washing.

Install the bottom plate

After you open the package, please lean

the washing machine gently down on Soft

object ( like the towel cloth,blanket, etc. ).

Install the bottom plate to the bottom of the

machine with the eight screws by a cross

screwdriver, then lift the machine up gently.

See to the figure:

Please install and adjust the machine according to the requirement of

the mannual. It is very important to your security and correct

operating the machine.

Installation and adjustment

The largest allowable slope of the shank base of the machine is 2 .The

slanting or rough ground will result in unstable running or stoppage of the

machine. Please adjust it with following methods:

Confirm it's horizontal:

Hang the lead line to check if it is

horizontal.

Adjust the adjustable leg:

Adjust the Installation position

Fasten

Loosen

High Low

the adjustable nut

the adjustable feet

1 .To twist the adjustable leg, please first

lift up the side of the leg slightly, loosen

the adjustable nut, and twist the leg.

2 .After adjustment, fasten the nut.

After opening thepackage, please take out the lint

filter from thedocument bag, install it tothe inner

tub. See tothe figure.

Install the lint filter

Inner tub

Lint filter

Drain hose

Ensure the drainhose si mounted at a suitableheight.

( above the floor).

Do not poke it too far down the drain pipe or silphoning will occur.

Between 800-1200mm

Back

Front

Soft object Screw

Bottom plate

Install the water inlet hose

1. Insert a new flat washer into each end of the inlet hoses. Firmly put the

washers in the coupling.

2. Connect the water inlet hoses to the water faucet.

Use the new hose sets supplied with the washer.

Any other old hose sets should not be used.

You may have to use pliers to tighten the coupling.

Do not over tighten because you may cause

damage to the valve.

Note:

3. Connect the other ends to their respective cold and hot water inlet valve

located at the rear of the washer

Check the connection between the

water inlet hose and the water tap

1.Close the water tap.

2. Pull off the water inlet hose from the water tap and washer.

Take down the water inlet hose

Install the water inlet hose

4.Fasten the nut. Swing it gently to confirm if it's suitable.

1.Swaying the hose gently to confirm if it is fastened

stable.

2.After installation, openthe tap to check if it leaks.

3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection

between the water inlet hose and the water tap, and

the connection between the water inlet hose and

washer are firm, so as to prevent dropping from

improve Installation position.

Water absorption cushion

Nut of the water inlet hose

Jointer of the water inlet valve

Use the new hose and the old hose should not be reused.

1.Preparation before washing

Preparation before washing

1.Connect the water inlet hose

2.Confirm that the washing machine is earthed reliably.Then

insert the power plug into the receptacle.Do not connect

the earth terminal to the gas pipe and tap water pipe.

3.Do not put down the drain hose.

4.Slanting or uneven

ground may result

in unstable working

or abnormal noise.

Please make the

machine stand horizontally.

Pay attention to followings before washing the laundries

Confirm if

there's

special

requirement

for the

laundries.

Clear the

pocket.

Take out the

coins ,

sand, hairpins

etc.

Fasten the

buttons and

zippers.

When the pulsator

is running ,the

buttons of the

laundries may

cause noise. For

the sake of discretion,

please put the

laundries with

buttons into other

laundries.

The quantity of

the laundries

shall not exceed

the rated value.

The big laundries

like the jeans

shall be put in

loosely.

a. Check if the laundries are applicable for washing with machine.

b. Divide the laundries with unfast color from other laundries.

c. Put those laundries difficult to absorb water into water with hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or dust.

For the parts with heavy soil, please apply detergent in advance, which can make it

easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it over before

putting in.

f. Do not put those laundries polluted by chemicals directly into the washing machine.

For those small laundries and those may get twisting or worn, and woolen/fur

laundries, please put them into mesh bag for washing.

0.8m H 1.2m

2.Put in the laundries

The capacity of washing of the machine refer to the

largest weight of the standard laundries under dry

condition that can be washed in one time. Laundries

quantity in one washing cycle shall be lower than the

rated capacity.

The thickness ,size , type of the cloth will influence the

actual washing capacity. It is suitable to put inreasonable

amount of laundries and the laundries can be turned

round in washing for one time washing.

Do not select more than "L" water level for laundries

less than 1.0kg ,so as to avoid splashing of water.

3. Usage of the detergent

If you open the top lid,the machine will stop working

and alarm in spinning process.

4. Close the top lid

How to use washing powder

Washing powder with poor quality or long-time

storage may get caked. Please clean the detergent

box duly in usage.

Dissolve directly inside the washing machine: (not

applicable for fuzzy and reserve program)

1.Add some water(select the

2.Add washing powder. Run for about 30s to fully

dissolve

the powder. Then push the"start/pause"

button.

3.Put in laundries. Select suitable water level. Push

the "start/pause"button again.

" L " water level)

Quick dissolving of washing powder:

1.Prepare warm water of 30 C and container.

2. Add washing powder while stirring to dissolve it

completely.

It is not recommended to use rich-foam washing

powder.

If you select save program, it is suggested to use

liquid detergent instead of washing powder to

guarantee the washing effect.

Please add suitable washing powder as per the

laundries quantity, the set water level and water quantity.

It is suggested to add washing powder into the box

directly under fuzzy program and reserve program.

How to use the whitener

Fill water to decided level.

Dilute the whitener with

container. Pour it slowly

into the washing tub.

Avoid using whitener on

laundries with color or

pattern as they are prone

to lose color.

The whitener shall not

touch the laundries

directly.

Refer to the user's

manual for the usage and

quantity of the whitener.

For powder whitener,

please dissolve it before

use.

Process,remain time digitron

It displays "--" during detecting.

It displays total remained time

(min). If the total time exceeds 99

minutes, it uses "A" on tens digit

to represent100 minutes, and uses

"b" to represent 110 minutes.

E.g. A3" represents 103 minutes.

It displays abnormal symbol in

abnormal situation.

(See to Page12)

5 Use the operation buttons

a Description of operation button

"POWER ON/OFF" button

Push the " POWER ON/OFF" button to

switch on the power.

Under power-on mode, push it to switch

off the power.

Push the " POWER ON/OFF" button to

switch on the power. If the " POWER

ON/OFF" button is not pushed, the

machine will switch off the power

automatically after 5 minutes.

Remarks: After pressing "Power On/Off" to connect power supply, if the washing

machine lasts idle more than 5 min, it would automatically shut off the supply.

WATER

LEVEL

POWER

ON/OFF

START

PAUSE

"START/PAUSE"button

After the power is switched on,

press it to start the machine.

During working,push it to pause.

During pause,push this button to

restart and go on working

The user selects a suitable water

level depending on the load.

" WATER LEVEL"button

"" button

you

can select one or several

Press

programs

" WASH CYCLE " button

NORMAL HEAVY QUICK WASH

and SPIN ONLY.

WASH

CYCLE

WASH CYCLE

TIME

REMAINING

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide