hager Dream User manual
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
Blind cover for electrical installations in buildings.
Correct use
- For the ush-mounted installation in standard wall boxes.
- Only suitable for use in indoor areas with no drip and no spray water.
Blank plate
Hager Dream Installation manual
2
Information for electricians
Installation
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
ç
Preparing the device for installation
Cover
1
Notches
Carefully loosen the cover on the notches with a at-blade screwdriver. Lift up and
remove the cover (1).
Installing the device into the wall box
2
Fix the device with the two screws attached into the wall box (2).
3
Assembling the cover
Cover
3
Place the cover in the correct position and snap it onto the device (3).
2-5gang frames are available for multiple combinations.
Table of contents
Other hager Switch manuals
hager
hager TS 223 Installation instructions
hager
hager WHT20 Series User manual
hager
hager HXE030H User manual
hager
hager EEN003 User manual
hager
hager WBMSLL User manual
hager
hager HXA031H User manual
hager
hager HIC4 T Series User manual
hager
hager SP 801 User manual
hager
hager TX 025 User manual
hager
hager kallysta WKT30 R Series User manual
