H3C S9500 Series Installation instructions

Other manuals for S9500 Series

73

Table of contents

Other H3C Switch manuals

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Command Manual – BPDU Tunneling

H3C S9500 Series Routing Switches Table of Contents

i

Table of Contents

Chapter 1 BPDU Tunneling Configuration Commands.............................................................1-1

1.1 BPDU Tunneling Configuration Commands......................................................................1-1

1.1.1 bpdu-tunnel dot1q enable .......................................................................................1-1

1.1.2 bpdu-tunnel dot1q stp .............................................................................................1-2

Command Manual – BPDU Tunneling

H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands

1-1

Chapter 1 BPDU Tunneling Configuration

Commands

1.1 BPDU Tunneling Configuration Commands

1.1.1 bpdu-tunnel dot1q enable

Syntax

bpdu-tunnel dot1q enable

undo bpdu-tunnel dot1q enable

View

System view, Ethernet interface view, port group view

Default Level

2: System level

Parameters

None

Description

Use the bpdu-tunnel dot1q enable command to enable BPDU tunneling.

Use the undo bpdu-tunnel dot1q enable command to disable BPDU tunneling.

Configured in system view, the command enables or disables BPDU tunneling globally;

configured in Ethernet interface view, the setting is effective on the current port only;

configured in interface view, the command enables or disables BPDU tunneling on the

current port only; configured in port group view, the command enables or disables

BPDU tunneling on all ports in the port group.

By default, BPDU tunneling is enabled globally but disabled for all ports.

Note:

zThe configured BPDU tunneling on a port cannot take effect unless BPDU

tunneling is enabled globally.

zOn an Ethernet interface, BPDU tunneling is not compatible with GVRP. To enable

BPDU tunneling on the Ethernet interface, you must disable GVRP on the interface.

Command Manual – BPDU Tunneling

H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands

1-2

Examples

# Enable BPDU tunneling globally.

<Sysname> system-view

[Sysname] bpdu-tunnel dot1q enable

# Enable BPDU tunneling on the Ethernet 1/1/1 port.

<Sysname> system-view

[Sysname] interface ethernet 1/1/1

[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q enable

1.1.2 bpdu-tunnel dot1q stp

Syntax

bpdu-tunnel dot1q stp

undo bpdu-tunnel dot1q stp

View

Ethernet interface view, port group view

Default Level

2: System level

Parameters

None

Description

Use the bpdu-tunnel dot1q stp command to enable STP BPDU tunneling for a port or

a group of ports.

Use the undo bpdu-tunnel dot1q stp command to disable STP BPDU tunneling for a

port or a group of ports.

By default, STP BPDU tunneling is disabled for all ports.

Configured in Ethernet interface view, the setting is effective on the current port only;

configured in port group view, the setting is effective on all ports in the port group.

Caution:

Before you can enable STP BPDU tunneling on a port, enable BPDU tunneling and

disable STP on the port.

Command Manual – BPDU Tunneling

H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands

1-3

Related commands: bpdu-tunnel dot1q enable.

Examples

# Enable STP BPDU tunneling on Ethernet 1/1/1.

<Sysname> system-view

[Sysname] interface ethernet 1/1/1

[Sysname-Ethernet1/1/1] stp disable

[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q enable

[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q stp