H3C S5820x series Installation manual

H3C S5820X&S5800 Switch Series

OAA Command Reference

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: Release 1211

Document version: 6W100-20110415

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

The H3C S5800&S5820X documentation set includes 12 command references, which describe the

commands and command syntax options for the S5800&S5820X Release1211.

The OAA Command Reference describes OAA configuration commands.

This preface includes:

•Audience

•Added and modified commands

•Conventions

•About the H3C S5800&S5820X documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the S5800 and S5820X switch series

Added and modified commands

None

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Convention Description

< > Button names are inside angle brackets. For example, click <OK>.

[ ] Window names, menu items, data table and field names are inside square brackets. For

example, pop up the [New User] window.

/ Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

Symbols

Convention Description

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

About the H3C S5800&S5820X documentation set

The H3C S5800&S5820X documentation set includes:

Category Documents Purposes

Marketing brochures Describe product specifications and benefits.

Product description and

specifications Technology white papers

Provide an in-depth description of software

features and technologies.

PSR150-A [ PSR150-D ]

Power Modules User

Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 150W

power modules available for the products.

Pluggable module

description

PSR300-12A

[ PSR300-12D1 ] Power

Modules User Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 300W

power modules available for the products.

PSR750-A [ PSR750-D ]

Power Modules User

Manual

Describes the appearances, features, specifications,

installation, and removal of the pluggable 750W

power modules available for the products.

RPS User Manual

Describes the appearances, features, and

specifications of the RPS units available for the

products.

LSW1FAN and

LSW1BFAN Installation

Manual

Describes the appearances, specifications,

installation, and removal of the pluggable fan

modules available for the products.

LSW148POEM Module

User Manual

Describes the appearance, features, installation,

and removal of the pluggable PoE module available

for the products.

S5820X [ S5800 ] Series

Ethernet Switches

Interface Cards User

Manual

Describes the models, hardware specifications,

installation, and removal of the interface cards

available for the products.

H3C OAP Cards User

Manual

Describes the benefits, features, hardware

specifications, installation, and removal of the OAP

cards available for the products.

H3C Low End Series

Ethernet Switches

Pluggable Modules

Manual

Describes the models, appearances, and

specifications of the pluggable modules available

for the products.

S5800-60C-PWR

Ethernet Switch Hot

Swappable Power

Module Ordering Guide

Guides you through ordering the hot-swappable

power modules available for the S5800-60C-PWR

switches in different cases.

Power configuration

RPS Ordering Information

for H3C Low-End Ethernet

Switches

Provides the RPS and switch compatibility matrix and

RPS cable specifications.

•S5800 Series Ethernet

Switches Quick Start

•S5820X Series

Ethernet Switches

Quick Start

•S5800 Series Ethernet

Switches CE DOC

•S5820X Series

Ethernet Switches CE

DOC

Provides regulatory information and the safety

instructions that must be followed during installation.

•S5800 Series Ethernet

Switches Quick Start

•S5820X Series

Ethernet Switches

Quick Start

Guides you through initial installation and setup

procedures to help you quickly set up and use your

device with the minimum configuration.

•S5800 Series Ethernet

Switches Installation

Manual

•S5820X Series

Ethernet Switches

Installation Manual

Provides a complete guide to hardware installation

and hardware specifications.

Pluggable SFP[SFP+][XFP]

Transceiver Modules

Installation Guide

Guides you through installing SFP/SFP+/XFP

transceiver modules.

Hardware installation

•S5800-60C-PWR

Switch Video

Installation Guide

•S5820X-28C Switch

Video Installation

Guide

Shows how to install the H3C S5800-60C-PWR and

H3C S5820X-28C Ethernet switches.

Configuration guide Describe software features and configuration

procedures.

Software configuration

Command reference Provide a quick reference to all available

commands.

H3C Series Ethernet

Switches Login Password

Recovery Manual

Tells how to find the lost password or recover the

password when the login password is lost.

Operations and

maintenance

Release notes

Provide information about the product release,

including the version history, hardware and software

compatibility matrix, version upgrade information,

technical support information, and software

upgrading.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

customer_service@h3c.com

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Contents

OAP card configuration commands ··························································································································· 1

oap connect ······························································································································································1

oap reboot ································································································································································2

ACFP configuration commands··································································································································· 3

acfp server enable····················································································································································3

display acfp client-info·············································································································································3

display acfp policy-info············································································································································5

display acfp rule-info················································································································································7

display acfp server-info············································································································································9

ACSEI configuration commands ·······························································································································11

acsei client close···················································································································································· 11

acsei client reboot ················································································································································· 11

acsei server ···························································································································································· 12

acsei server enable ··············································································································································· 12

acsei timer clock-sync············································································································································ 13

acsei timer monitor················································································································································ 13

display acsei client info ········································································································································ 14

display acsei client summary ······························································································································· 16

Index ···········································································································································································18

OAP card configuration commands

oap connect

Syntax

oap connect slot slot-number system system-name

View

User view

Default level

2: System level

Parameters

slot slot-number: Specifies an OAP card on a member device of an Intelligent Resilient Framework (IRF)

virtual device. The slot-number argument takes the member ID of the member of the IRF virtual device,

and its value ranges depend on the number of member devices and there member IDs.

system system-name: Specifies the system name of the OAP card on the certain device. The system-name

argument specifies the OAP system name of the card in the form of SubSlotX with Xas the slot number

of the OAP card. For example, the system name of the OAP card in slot 3 is SubSlot3.

Description

Use the oap connect command to redirect from the switch to the software system of the specified OAP

card.

NOTE:

•When this command is executed, the terminal display interface is switched from the command line

interface (CLI) on the switch to the operating interface of the software system of the OAP card, and you

can manage the system and application software on the OAP card.

•To return from the software system on the OAP card to the CLI of the switch, press Ctrl+K.

•You can install multiple OAP cards on some models of the S5800 and S5820X switches. If you lo

in to

the software system of one OAP card first, you cannot lo

in to the software system of another by usin

the oap connect command. To log in to the software system of another

OAP card, return to the CLI on

the switch by pressing Ctrl+K.

•In an IRF virtual device, you can use the oap connect command repeatedly to log in to the software

systems of multiple OAP cards installed on different member switches, but cannot lo

in to the software

systems of multiple OAP cards installed on the same member switch simultaneously.

Examples

# Redirect from the device to the software system of the OAP card in slot 3 of the member device 1.

<Sysname> oap connect slot 1 system SubSlot3

Press CTRL+K to quit.

Connected to SubSlot3

oap reboot

Syntax

oap reboot slot slot-number system system-name

View

User view

Default level

2: System level

Parameters

slot slot-number: Restart the software system of an OAP card on a member of an IRF virtual device. The

slot-number argument takes the member ID of the member of the IRF virtual device, and its value ranges

depend on the number of member devices and there member IDs.

system system-name: Specifies the system name of the OAP card on the certain device. The system-name

argument specifies the system name of the OAP card in the form of SubSlotX with Xas the slot number

of the OAP card. For example, the system name of the OAP card in slot 3 is SubSlot3.

Description

Use the oap reboot command to restart the software system of the specified OAP card.

Examples

# Restart the software system of the OAP card in slot 3 of member device 1.

<Sysname> oap reboot slot 1 system SubSlot3

This command will recover the SubSlot3 from shutdown or other failed state.

Warning: This command may lose the data on the hard disk if the SubSlot1 is not

being shut down! Continue? [Y/N]:y

Reboot SubSlot1 by command.

Other manuals for s5820x series

This manual suits for next models

Table of contents

Other H3C Switch manuals

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

H3C s5820x series Installation manual

Popular Switch manuals by other brands