H3C S5800 series User manual

H3C S5800 Series Ethernet Switches

Installation Manual

New H3C Technologies Co., Ltd.

http://www.h3c.com.hk

Document version: 6W111-20170718

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of New H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New

H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

H3C S5800 Series Ethernet Switches Installation Manual describes the appearance, installation,

power-on, maintenance, and troubleshooting of the H3C S5800 series Ethernet switches.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Obtaining documentation.

•Technical support

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the S5800 series.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots, and

other information in the examples differ from what you have on your device.

Obtaining documentation

To access the most up-to-date H3C product documentation, go to the H3C website

at http://www.h3c.com.hk.

To obtain information about installation, configuration, and maintenance, click

http://www.h3c.com.hk/Technical_Documents

To obtain software version information such as release notes, click

http://www.h3c.com.hk/Software_Download

Technical support

servic[email protected]

http://www.h3c.com.hk

Documentation feedback

You can email your comments about product documentation to inf[email protected].

We appreciate your comments.



Contents

Product overview·························································································································································· 1

About the H3C S5800 Switch Series ·····························································································································1

Switch models and technical specifications ···················································································································1

Hardware compatibility matrix········································································································································4

S5800-60C-PWR panel views·········································································································································6

Front panel ································································································································································6

Rear panel·································································································································································7

S5800-56C panel views ··················································································································································7

S5800-56C-PWR panel views·········································································································································9

S5800-54S panel views················································································································································ 10

Left side panel························································································································································ 11

S5800-32C panel views ··············································································································································· 12

S5800-32C-PWR panel views······································································································································ 13

S5800-32F panel views················································································································································ 14

Ports ················································································································································································· 15

Console port ·························································································································································· 15

Management Ethernet port··································································································································· 15

USB port ································································································································································· 15

10/100/1000Base-T Ethernet port ···················································································································· 16

100/1000Base-X SFP port··································································································································· 16

SFP+ port································································································································································ 17

LEDs ················································································································································································· 19

System status LED··················································································································································· 19

Power module LED················································································································································· 20

RPS status LED························································································································································ 20

Port mode LED························································································································································ 21

Seven-segment LED················································································································································ 21

10/100/1000Base-T Ethernet port LED············································································································· 22

100/1000Base-X SFP port LED ··························································································································· 23

SFP+ port LED ························································································································································ 23

Management Ethernet port LEDs·························································································································· 24

OAP card status LED ············································································································································· 24

PoE module status LED ·········································································································································· 24

Interface card status LED······································································································································· 25

Hot swappable power modules···································································································································· 25

Hot swappable fan trays··············································································································································· 27

Interface cards································································································································································ 28

OAP cards ······································································································································································ 29

Hot swappable PoE modules ········································································································································ 29

Preparing for installation ···········································································································································30

Safety recommendations ··············································································································································· 30

Examining the installation site ······································································································································ 30

Temperature/humidity ·········································································································································· 30

Cleanness······························································································································································· 31

EMI·········································································································································································· 31

Laser safety····························································································································································· 31

Installation tools······························································································································································ 32

Installing the switch····················································································································································33

Installing the switch in a 19-inch rack·························································································································· 34

Installation methods··············································································································································· 34

Mounting bracket and cable management bracket kits···················································································· 35

Rack mounting rail kit ··········································································································································· 36

Installing the mounting brackets, chassis rails, and grounding cable (for the S5800-54S)·························· 36

Attaching the mounting brackets to the switch chassis (for all S5800 switches except the S5800-54S)···· 39

Rack-mounting the S5800-54S switch ················································································································ 40

Rack-mounting an S5800 switch except the S5800-54S ················································································· 43

Mounting the switch on a workbench·························································································································· 44

Grounding the switch ···················································································································································· 45

Grounding the switch with a grounding strip····································································································· 45

Grounding the switch in other grounding environment····················································································· 48

Installing/Removing a fan tray ····································································································································· 49

Installing a fan tray ··············································································································································· 49

Removing a fan tray·············································································································································· 50

Installing/Removing a power module·························································································································· 50

Installing/Removing a power module (for the S5800-54S) ············································································· 51

Installing/Removing a power module (for the S5800-60C-PWR and the S5800-32F)································· 54

Connecting the power cord ·········································································································································· 56

Connecting an AC power cord to the switch····································································································· 56

Connecting the switch to a –54 VDC output RPS ······························································································ 58

Connecting the switch to a 12 VDC output RPS ································································································ 58

Connecting the PSR150-A/PSR150-A1 ·············································································································· 59

Connecting the PSR150-D/PSR150-D1 to a –48 VDC power source····························································· 60

Connecting the PSR150-D/PSR150-D1 to a –54 VDC output RPS·································································· 61

Connecting the PSR300-12A/PSR300-12A1/PSR300-12A2·········································································· 61

Connecting the PSR300-12D1/PSR300-12D2 to a –48 VDC power source ················································ 62

Connecting the PSR300-12D1/PSR300-12D2 to a –54 VDC output RPS······················································ 63

Connecting the PSR750-A ···································································································································· 63

Connecting the PSR750-D to a –54 VDC output RPS························································································ 64

Connecting the LSVM1AC650/LSVM1AC300································································································· 65

Connecting the LSVM1DC650/LSVM1DC300 ································································································· 66

Installing/Removing an interface card························································································································· 66

Installing an interface card··································································································································· 67

Removing an interface card ································································································································· 68

Installing/Removing an OAP card ······························································································································· 68

Installing an OAP card in the OAP card slot (only for the S5800-60C-PWR)················································ 68

Removing the card in the OAP card slot (only for the S5800-60C-PWR)······················································· 69

Installing an OAP card in an expansion interface card slot (for the entire series but the S5800-54S)······· 70

Removing the OAP card in an expansion interface card slot (for the entire series but the S5800-54S) ···· 70

Installing/Removing a PoE module ······························································································································ 71

Installing a PoE module········································································································································· 71

iii

Removing the PoE module ···································································································································· 71

Verifying the installation················································································································································ 72

Powering on the switch for the first time···················································································································73

Setting up the configuration environment···················································································································· 73

Connecting the console cable ······································································································································ 73

Console cable························································································································································ 73

Connection procedure ·········································································································································· 73

Setting terminal parameters ·········································································································································· 74

Powering on the switch·················································································································································· 77

Setting up an IRF fabric ·············································································································································78

IRF fabric setup flowchart·············································································································································· 78

Planning IRF fabric setup··············································································································································· 79

Planning IRF fabric size and the installation site································································································ 79

Identifying the master switch and planning IRF member IDs ············································································ 79

Planning IRF topology and connections ·············································································································· 80

Identifying physical IRF ports on the member switches ····················································································· 81

Planning the cabling scheme ······························································································································· 82

Configuring basic IRF settings······································································································································· 84

Connecting the physical IRF ports ································································································································ 84

Accessing the IRF fabric to verify the configuration ··································································································· 85

Maintenance and troubleshooting····························································································································86

Password loss ································································································································································· 86

Console login password loss ······························································································································· 86

Boot ROM password loss ····································································································································· 86

Power module failure····················································································································································· 86

Fixed power module failure ································································································································· 86

Hot swappable power module failure ················································································································ 88

OAP card failure ···························································································································································· 89

Failure of the OAP card in the OAP card slot···································································································· 89

Failure of the OAP card in an expansion interface card slot ··········································································· 90

Hot swappable PoE module failure······························································································································ 90

Fan failure······································································································································································· 91

Fixed fan failure····················································································································································· 91

Hot swappable fan tray failure···························································································································· 91

Configuration terminal problems·································································································································· 91

Index ···········································································································································································93

Product overview

About the H3C S5800 Switch Series

The H3C S5800 Switch Series is a line of Layer 3 Gigabit Ethernet switching products intended for the

distribution and access layers of enterprise or metropolitan area networks. You can also use this switch

series to offer access to the server farms in a data center.

The H3C S5800 Switch Series offers the following benefits:

•10-Gigabit uplinks and a wide range of features, including the routing features, IPv4 and IPv6 dual

stack, and H3C cluster management for streamlined network management.

•Innovative Intelligent Resilient Framework (IRF) technology, which can virtualize connected S5800

switches into one virtual switch for higher availability, scalability and resiliency, and manageability.

•Support for the H3C Open Application Architecture (OAA). You can install customized open

application platform (OAP) cards in your S5800 switch to provide services such as firewall,

anti-virus, IPS, and wireless access control.

Switch models and technical specifications

The H3C S5800 Switch Series includes the following models:

•S5800-60C-PWR

•S5800-56C

•S5800-56C-PWR

•S5800-54S

•S5800-32C

•S5800-32C-PWR

•S5800-32F

Table 1 H3C S5800 Switch Series technical specifications

Item S5800-6

0C-PWR

S5800-56

S5800-5

6C-PWR

S5800-5

S5800-3

2C-PWR

S5800-3

Dimensions

(H × W × D)

86.1 ×

440 ×

465 mm

(3.39 ×

17.32 ×

18.31 in)

43.6 ×

440 × 367

mm (1.72

× 17.32 ×

14.45 in)

43.6 ×

440 ×

427 mm

(1.72 ×

17.32 ×

16.81 in)

43.6 ×

440 ×

660 mm

(1.72 ×

17.32 ×

25.98 in)

43.6 ×

440 ×

367 mm

(1.72 ×

17.32 ×

14.45 in)

43.6 ×

440 ×

427 mm

(1.72 ×

17.32 ×

16.81 in)

43.6 ×

440 ×

427 mm

(1.72 ×

17.32 ×

16.81 in)

Weight ≤18 kg

(39.68 lb)

≤6.5 kg

(14.33 lb)

≤8.5 kg

(18.74 lb)

≤12.2 kg

(26.90 lb)

≤6.0 kg

(13.23 lb)

≤8 kg

(17.64 lb)

≤8.5 kg

(18.74 lb)

Item S5800-6

0C-PWR

S5800-56

S5800-5

6C-PWR

S5800-5

S5800-3

2C-PWR

S5800-3

Console ports

1, on the

front

panel

1, covered

by the logo

plate on

the front

panel

1, covered

by the

logo plate

on the

front panel

1, on the

rear panel

1, on the

front panel

1, on the

front panel

1, covered

by the

logo plate

on the

front panel

Management

Ethernet ports N/A N/A N/A 1, on the

rear panel

N/A N/A 1, on the

rear panel

USB ports (full

speed)

1, on the

front

panel

1, covered

by the logo

plate on

the front

panel

1, covered

by the

logo plate

on the

front panel

1, on the

rear panel

1, on the

front panel

1, on the

front panel

1, covered

by the

logo plate

on the

front panel

10/100/10

00Base-T

Ethernet ports

48, PoE 48 48, PoE 48 24 24, PoE N/A

100/1000B

ase-X SFP

ports

4 N/A N/A N/A N/A N/A 24

SFP+ ports N/A

4 4 6 4 4 4

You can plug an SFP+ transceiver module, SFP transceiver module or SFP+ cable

into an SFP port. An SFP port plugged in with an SFP+ cable can be used to

connect IRF member switches.

Expansion

interface card

slots

2, on the

front

panel

1, on the

rear panel

1, on the

rear panel

N/A 1, on the

rear panel

1, on the

rear panel

1, on the

front panel

OAP card

slots 1 N/A N/A N/A N/A N/A N/A

Fan tray slots 1, hot

swapping

N/A

Fixed fans

are used.

N/A

Fixed fans

are used.

2, hot

swapping

N/A

Fixed fans

are used.

N/A

Fixed fans

are used

1, hot

swapping

PoE module

slots 1, N/A N/A N/A N/A N/A N/A

Power

module slots

2, hot

swapping N/A N/A

2, hot

swapping N/A N/A 2, hot

swapping

AC-input

voltage

Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz

Max voltage: 90 VAC to 264 VAC @ 47 or 63 Hz

Other manuals for s5800 series

This manual suits for next models

Table of contents

Other H3C Switch manuals

H3C

H3C S7500 Series User manual

H3C

H3C S6800-54QT Operating and maintenance manual

H3C

H3C S5500-SI Series User manual

H3C

H3C S3600V2-52TP-SI Installation manual

H3C

H3C S7508E-X User manual

H3C

H3C S12500X-2L User manual

H3C

H3C S3100 Series User manual

H3C

H3C S12500X-AF Series User manual

H3C

H3C S6820 Series Quick guide

H3C

H3C S6890-54HF Operating and maintenance manual

H3C

H3C H3C S3600 Series User manual

H3C

H3C S9500 Series User manual

H3C

H3C s5820x series Installation manual

H3C

H3C S7500 Series Installation instructions

H3C

H3C Aolynk ET204 User manual

H3C

H3C S5130S-EI series User manual

H3C

H3C s5820x series User manual

H3C

H3C S9500 Series User manual

H3C

H3C S5500-EI series User manual

H3C

H3C S3610 Series User manual

H3C

H3C CR19000-16 Operating and maintenance manual

H3C

H3C S6825-54HF User manual

H3C

H3C S6800 Series User manual

H3C

H3C SOHO Series User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

H3C s5800 series User manual

Popular Switch manuals by other brands