H3C SR6604-X Operating and maintenance manual

Accessories

Wear an ESD wrist strap, and make sure the wrist strap has a good skin contact and is

reliably grounded. 操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认

防静电腕带已经良好接地。

The installation tools are not provided with the router. Prepare them yourself.

路由器不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。

Installing the router in a rack

Installing a cable management bracket

SR6616-X

Flathead screwdriver

一字螺丝刀

Phillips screwdriver

十字螺丝刀

Needle-nose pliers

尖嘴钳

Wire-stripping pliers

剥线钳

ESD wrist strap

(provided)

防静电腕带(标配)

Hiagonal pliers

斜口钳

Claw hammer

羊角锤

Marker

记号笔

Cage nut

(provided)

浮动螺母(标配)

Grounding cable

(provided)

地线(标配)

Removable

cable tie (user

supplied)

可拆卸式扎带

(用户自备)

M6 screw

(provided)

M6 螺钉(标配)

Mounting bracket

for SR6604-X

(provided)

SR6604-X挂耳

(标配)

You need to install a cable management bracket for an SR6616-X router. For the SR6604-

X and SR6608-X, the cable management bracket is attached to the mounting brackets on

the routers. SR6616-X路由器需要单独安装走线架；对于SR6604-X/SR6608-X路由器，走

线架集成在挂耳上，无需单独安装。

Tools and equipments

Console cable

(provided)

配置口电缆(标配)

Mounting bracket

for SR6608-X

(provided)

SR6608-X挂耳

(标配)

Mounting bracket for

SR6616-X

(provided)

SR6616-X挂耳(标配)

Cable management

bracket for SR6616-

X (provided)

SR6616-X走线架

(标配)

Install a rack shelf in the rack.

安装托盘到机柜

The procedures for installing an SR6604-X, SR6608-X, and SR6616-X router are

similar. The following uses an SR6608-X as an example.

安装路由器的过程类似，下文均以SR6608-X路由器为例进行说明。

BOM: 3104A0C2

H3C SR6604-X/SR6608-X/SR6616-X Routers Installation Quick Start-6PW108

H3C SR6604-X/SR6608-X/SR6616-X -6PW108

Connecting the grounding cable

Install the router in the rack.

安装路由器到机柜

To connect the grounding cable:

1. Make sure the rack is securely grounded.

2. Attach the building grounding cable to the grounding strip on the rack.

3. Connect the router and the grounding strip on the rack with the provided grounding cable.

Correctly connecting the router grounding cable is crucial to lightning protection and EMI

protection.路由器地线的正确连接是路由器防雷、防干扰的重要保障，请使用设备随机提

供的保护地线正确接地。

Install cage nuts.

安装浮动螺母

Attach the mounting

brackets to the router.

安装挂耳到路由器

路由器安装在机柜时，要求机柜已经良好接地，首先需将楼宇保护地线与机柜接地排相连，

然后使用接地线将路由器与机柜接地排相连。

Installing a power module

MPUs, LPUs, HIMs, MIMs,and MICs are hot swappable. 主控板、业务板及HIM/MIM/MIC接口

模块支持热插拔

Connecting the power cable

Before connecting the power cable, make sure the router is correctly grounded. 连接电源

线前，需保证设备已正确接地。

Make sure the power switch is off and connect the power cable to the router first to avoid

bodily injury. Then connect the power cable to the equipment-room power supply system.

在连接电源线时，请确认路由器电源开关处于关闭状态，先完成电源线与路由器侧的连

接，再进行电源线与机房供电系统的连接，以免造成人身伤害。

Installing an MPU/LPU/HIM/MIM/MIC

Install an LPU.

安装业务板

Install an MPU. You can install two

MPUs for redundancy.

安装主控板，支持双主控

Install an HMIM.

安装HMIM接口模块

Install a HIM/MIM/MIC.

安装HIM/MIM/MIC接口模块

The router supports 650/1200 W AC and DC power modules. You can install multiple power

modules for redundancy. The procedures for installing different models of power modules

are the same. The following takes a 650 W AC power module as an example.

设备支持650W和1200W交、直流电源模块，支持多个电源模块进行冗余备份，支持热插拔。

电源模块的安装过程一致，以650W交流电源模块安装过程为例进行说明。

Install a 650 W AC power module.

安装650W交流电源模块

Connecting an AC power cord 安装交流电源线

The procedures for connecting a power cord for different models of power modules are

the same. The following takes a 650 W AC power module as an example. 650W和

1200W交流电源模块的电源线连接方法一致，以650W交流电源模块为例进行说明。

To access the most up-to-date H3C product documentation on the H3C website at

www.h3c.com.hk:

1. Go to http://www.h3c.com.hk/Technical_Documents.

2. Choose the desired product category and model.

您可以访问H3C网站（www.h3c.com）获取最新的产品配套资料：

1. 请访问网址：http://www.h3c.com/cn/Technical_Documents；

2. 选择产品类别和产品型号，即可查询和下载与该产品相关的手册。

IMPORTANT! See Compliance and Safety information for the product before connecting to

the supply. To obtain Compliance and Safety information, follow these steps:

1. Go to http://www.h3c.com.hk/Technical_Documents.

2. Choose the desired product category and model.

3. Obtain Compliance and Safety information from the Compliance and Safety Manual for

the product.

重要！在产品上电启动之前，请阅读本产品的安全与兼容性信息。您可以通过以下步骤获取

本产品的安全与兼容性信息：

1. 请访问网址：http://www.h3c.com/cn/Technical_Documents；

2. 选择产品类型以及产品型号；

3. 您可以从安全与兼容性手册中获取安全与兼容性信息。

Obtaining documentation

Safety statements

Connecting power cords for the PSR650-D 安装650W直流电源线

Connecting power cords for the PSR1200-D 安装1200W直流电源线

1 2

For more information about the product and installation procedures, log in to www.h3c.com.hk

如需了解产品及安装方面的更多信息，请登录H3C网站 www.h3c.com

This manual suits for next models

Table of contents

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview