H.Koenig STM45 User manual
Instruction manual
Manuel d’utilisation
Bedienungsanleitung
Handboek
Manual de utilización
Manuale d’uso
STM45
GARMENT STEAMER
DEFROISSEUR VERTICAL
TEXTIL-DAMPFGLÄTTER
KLEDINGSTUK STEAMER
PLANCHA DE VAPOR VERTICAL
STIRATRICE A VAPORE VERTICALE
ENGLISH
Product introduction
Features and purpose :
The device is a kind of strong steam ironing machine with cleaning function as a supplement. It is
elegant in design, simple, economical and safe, especially applicable for household, garment,
wedding dress, curtain, sofa, hotel, restaurant, etc. The machine irons especially well the pure silk,
woolens, chemical fiber, cotton and blending textiles, flattens them fast without damage and also
sterilizes and cleans them. However, it only asks easy maintenance and repair.
The machine has been granted with several national and international patents (including the design
patent, utility model and invention patent).
Precautions
Safe protection
1. Thermostat
The thermostat would keep the temperature at a rated value by means of the control current when
the tank is short of water.
2. Hot fuse
In case the thermostat damages or fails, the hot fuse of protective device gives protection by cutting
off the power supply of machine body when the machine reaches a certain temperature.
Warning:
* Do not eject the steam directly towards people or animal, or scald may be caused.
* Only use the detachable accessories when there is no steam and they are cooled down to avoid
scalds.
* Conduct the installation in accordance with the instructions. Do not dismantle without
authorization.
* The liquid or steam must not be directed towards equipment containing electrical components,
such as the interior of ovens
Notices
* Do not operate the machine unless you read this manual thoroughly. The machine can only be used
indoors.
* The machine can only be used for the purposes described in this manual. Utilization for other
purposes is prohibited.
* The water for the machine shall be domestic potable water to avoid contaminating the textiles.
Purified water is recommended.
*Make sure the working voltage of the machine accords with your domestic supply voltage and the
machine is connected to power supply mounted with 30mA creepage protection switch. Only the
firmly grounded 3-pole socket is applicable for the machine. The rated current shall be not less than
15A.
* Thoroughly stretch the power cords before use. Avoid sharing the same power supply with other
high-power electric appliances. Do not use wiring board in order to prevent fires arising from the
wiring board overloaded.
* Before operation, connect all the necessary ironing or cleaning accessories, fill the outer tank to full
and then turn on the power supply switch.
* Thoroughly stretch the expansion link to ensure that the steam hose is unobstructed and untwisted
and other functions perform well.
* The machine shall be put on a flat and stable place.
* Do not fill hot water in the tank, or the tank would deform. Fill water before operation and observe
the water level from time to time. Add water to proper volume in case it is below the designed water
level.
* Do not directly put the machine under water tap to fill water.
* Do not fill solutions such as detergent into the tank.
* Keep power cords and steam pipes from metals or other heating elements.
* Do not leave the machine operating without attention.
* The machine shall not be operated by these people (including children): the physically, tactilely or
mentally disabled or those who lack of experience and knowledge, unless they are supervised or
guided by someone who is responsible for their safety in respect of the application of the machine.
* Children shall be monitored to be prevented from playing with the machine.
* During operation, keep the ironing brush away from people, animal or domestic electric appliance.
When the machine is not in use, turn off the steam jet switch and put the ironing brush on the
support to avoid steam hurting people or damage things.
* During operation, do not touch the steam jet outlet and steam conduit of the ironing brush or drag
the power cords.
* Do not put on floor or distort the steam conduit, or accidents may be caused by the steam jammed
in the steam conduit when it is squeezed.
*Do not drag the steam conduit by force or to move the machine, or the steam conduit may
be damaged or steam may leak.
*Do not pull out or plug in the steam conduit when the machine is still hot but only when the
machine is cooled down, thus to avoid scald.
*If the ironing brush falls, has visible damage or is leaking, stop using it.
*To avoid scald by steam, after operation, turn off the power supply, pull out the plug and,
when the machine is cooled down, pour out the remnant water, and then have the machine
packed and stored. However, let the machine air dried before packing and storage. Do not
pull put the plug by dragging the power cord.
*Use dry soft cloth and neutral detergent to clean the machine surface and do not use
solvents such as gasoline, alcohol, banana oil, etc. Prevent liquids penetrating into the
machine.
*Do not soak the machine, power cord or plug in water or other solutions. Do not keep the
machine in places which are damp, exposed or of corrosive gases.
*Keep the machine away from flammable or explosive objects.
*Please clean the filter sieve at regular intervals to keep it available. The machine shall be
cleaned or maintained from time to time (every 1 month or 20L water is consumed). (See the
following sections for the cleaning and maintenance)
*Push the support pole to move the machine. Do not move the machine by force when it is
tough to be moved. Discharge the water before checking the wheels. Turn off the power
supply and pull out the plug before moving the machine.
*Turn off the power supply and pull out the plug before discharging water from or filling water
in the tank. Avoid water leakage. Do not open or take down the tank in use.
*If find any damage on the accessories especially the safe protection and power cord, stop
using the machine and inform our professional personnel of service center for repair. Do not
repair at your own discretion.
*Before cleaning or repairing the machine, turn off the power supply, pull out the plug,
release the pressure inside the heating element of the base and let the machine cool down.
*This device is not intended for use by persons with reduced capacity on the physical, mental
or sensory or lack of experience and knowledge (including children), unless he has them was
asked to monitor or if they have had instructions on the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure they do not play with the
device.
Do abide by the following for the safety of yourself and others.
Notices
Plug the power plug in thoroughly to
avoid electric shock, as well as open
circuit, short circuit, smoking and
flammation caused by over-heat of plug.
Use the socket with rated voltage of
220V-250V separately from other
electric appliances, otherwise, fire
may occur due to heat.
No watering: danger of short circuit and
electric shock.
Do not pull or plug the plug with wet
hand in respect of electric shock.
Do not use broken or loose socket in
respect of electric shock, short circuit
and flammation.
Keep away from the steam hole to
avoid burn.
Do not intend to refit, remove or repair
the product in respect of fire, electric
shock or other injuries.
Keep it away from the children or
others unable to operate.
Do not insert the metal needle into heat
dissipation hole or clearance in respect
of injury caused by electric shock.
Remove the dust on power plug at
regular intervals, otherwise, fire
accident may occur due to poor
insulation.
Do not put the product in water or
damp environment or close to other
heat sources, and do not put the inner
boiler on the naked fire.
Do not touch the hot part, especially
the surface of steam jet of ironing
brush during or after the operation.
Hold the plug rather than haul the
power cord to pull out the power plug.
Do use the attached power cord
which shall not be used for other
equipment.
Do not operate on the unstable platform
or cushions which could not receive heat
in respect of injury or fire caused by
fallen ironing brush.
If not in use, pull the power plug out
of the socket to avoid electric shock,
creepage and fire arising from
damages and insulation ageing.
Wash the ironing brush after totally
cooling down to avoid scald.
Do not put it close to wall or
furniture in case the steam leads to
color change or distortion of which.
Keep it over 30cm away from the
wall and furniture.
Product View
Product installation
Take out the appliance from the giftbox and spread the power cord
Take out the supporting bar; Insert the supporting bar to the right hole of base, then locking it
Put commodity shelf at the top pole,it can be adjusted the appropriate height if needed.
Take out hanger and assemble the hook to the left side of hanger.Then insert the hanger from top of
support pole.
Lift down the hood of connecting hole, take out the ironing brush, align the plug of ironing brush
with and insert it into the corresponding hole on machine body, and tighten it clockwise. After
using, please pull out the ironing brush and cover the hood.
If required, take out the fur brush, align the plastic clasps at bottom of fur brush with and grip it
into the metallic snap close at the bottom of ironing brush. The dismounting is in a reverse
order.
Parameters
Rated power: 2180W
Voltage: 220V-240V~50Hz
Steam pressure: 3bar
Steam flow: 35g/min
(max) Tank capacity:
1600ml
Product Operations
Ironing:
1. Stand the machine assembled on flat and stable floor. Adjust the
height and spread range of the hanger as required and hang the
clothes on it. Ensure there is enough water in the water tank and the
tank is located properly. Plug the plug into the power socket, select the
appropriate gear. Let the machine preheat for about 40s, waiting for
steam of ironing brush.
2. Iron from the main part of clothes, hold the lower hem by hand gently to make the wrinkled part
flat and iron the rippled fibers out by the hot steam (as shown in Picture 2).
When the ironing brush shake or move from side to side, water bead may
be appeared on the handle of ironing brush ( Danger of scalding ).
3. Press gently the metal panel of ironing brush on the clothes, move the brush up and down at such
a speed that the steam penetrates into the fibers appropriately for hot forming.
4. After ironing the main part, ironing the specific parts from up to down. When ironing the collar,
you may fold the whole collar back, hold one end of the collar by hand, move the ironing brush
horizontally and, during when, be careful of the hot steam (as shown in Picture 3).
5. When ironing the sleeves, pull the sleeves to straight and move the ironing brush along the
sleeves.
6. After ironing the front of clothes, turn the clothes over to iron its back.
Ironing Pants Line:
Take out the pants line clip, insert the metallic clasps at bottom of ironing brush into plastic slot of
the pants line clip, press down the handle to open the interface between pants line clip and ironing
brush, clasp the pants line and move the ironing brush gently up and down to make the pants line
rightly straight. The dismounting is in a reverse order.
When the steam tube bending, it happen to emit cooing sound.
Water bead may be appeared on the steam holes and the amount of
steam will decrease significantly. Lift the handle for 2-3 seconds in this
case, everything will be ok.
Product Maintenance
1. Purified water is recommended in order to avoid contaminating the textiles.
The contents of mineral substance differ in various kinds of water, so there would be sediments to
respective extents if the ironing machine is applied with water of different qualities, which makes the
steam flow lessens, intermits or even stops. Therefore, in order to avoid contaminating the textiles,
the purified water is recommended. However, the two filters inside the steam gun may filter away
the impurities in the water and the boiler scale in the heating element, thus to make the water clear.
2. To better maintain the machine, the machine, when used for a certain period,
may be cleaned or maintained as follows, in which we suggest to take the both
steps together:
* Cleaning the water tank
>>>Related parts: water tank and tank filter
>>>Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be
prolonged or shortened according to the actual water quality.
>>> Cleaning steps:
Pour the remnant water out of the tank;
Screw out counterclockwise the tank filter;
Take apart the filter, rinse with clear water all its accessories as well as the water tank, after which,
put the filter back into the bottom of tank and tighten it clockwise.
Table of contents
Languages:
Other H.Koenig Steam Cleaner manuals
H.Koenig
H.Koenig SWIP150 User manual
H.Koenig
H.Koenig NV700 User manual
H.Koenig
H.Koenig STM20 User manual
H.Koenig
H.Koenig NV60 User manual
H.Koenig
H.Koenig ECO420 User manual
H.Koenig
H.Koenig NV6200 User manual
H.Koenig
H.Koenig NV720 User manual
H.Koenig
H.Koenig NV6400 User manual
H.Koenig
H.Koenig NV680 User manual
H.Koenig
H.Koenig STM10 User manual
