GW Instek PSB-1400L User manual

Multi-Range DC Power Supply

PSB-1000 Series

USER MANUAL

GW INSTEK PART NO. 82SB-1800UM01

ISO-9001 CERTIFIED MANUFACTURER

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

SAFETY INSTRUCTIONS

Table of Contents

SAFETY INSTRUCTIONS ................................................... 5

GETTING STARTED ........................................................... 9

PSB-1000 Series Overview.................... 11

Appearance .......................................... 15

Theory of Operation ............................. 29

OPERATION .................................................................... 41

Set Up.................................................. 43

Basic Operation ................................... 65

Advanced Settings ............................... 77

Power On Configuration ...................... 86

Parallel/Series Operation ..................... 98

File Operations .................................. 118

Sequence Function............................. 127

Trigger Input & Output ...................... 138

EXTERNAL CONTROL ....................................................143

Analog Control ................................... 144

Remote Monitoring ............................ 161

COMMUNICATION INTERFACE .....................................166

Interface Configuration ...................... 167

FAQ ...............................................................................187

APPENDIX .....................................................................188

PSB-1000 Default Settings ................. 188

PSB-1000 Specifications..................... 190

PSB-1000 Dimensions ........................ 200

Declaration of Conformity .................. 201

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

PSB-1000 Series User Manual

INDEX............................................................................202

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

SAFETY INSTRUCTIONS

This chapter contains important safety

instructions that you must follow during

operation and storage. Read the following before

any operation to ensure your safety and to keep

the instrument in the best possible condition.

Safety Symbols

These safety symbols may appear in this manual or on the

instrument.

WARNING

Warning: Identifies conditions or practices that

could result in injury or loss of life.

CAUTION

Caution: Identifies conditions or practices that

could result in damage to the PSB-1000 or to other

properties.

DANGER High Voltage

Attention Refer to the Manual

Protective Conductor Terminal

Earth (ground) Terminal

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

PSB-1000 Series User Manual

Do not dispose electronic equipment as unsorted

municipal waste. Please use a separate collection

facility or contact the supplier from which this

instrument was purchased.

Safety Guidelines

General

Guideline

CAUTION

Do not place any heavy object on the PSB-1000.

Avoid severe impact or rough handling that

leads to damaging the PSB-1000.

Do not discharge static electricity to the PSB-

1000.

Use only mating connectors, not bare wires, for

the terminals.

Do not block the cooling fan opening.

Do not disassemble the PSB-1000 unless you are

qualified.

(Measurement categories) EN 61010-1:2010 specifies the

measurement categories and their requirements as follows. The

PSB-1000 doesn’t fall under category II, III or IV.

Measurement category IV is for measurement performed at the

source of low-voltage installation.

Measurement category III is for measurement performed in the

building installation.

Measurement category II is for measurement performed on the

circuits directly connected to the low voltage installation.

0 is for measurements performed on circuits not directly

connected to Mains.

Power Supply

WARNING

AC Input voltage range: 100Vac to 240Vac

Frequency: 47Hz-63Hz

To avoid electrical shock connect the protective

grounding conductor of the AC power cord to

an earth ground.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

SAFETY INSTRUCTIONS

Cleaning the PSB-

1000

Disconnect the power cord before cleaning.

Use a soft cloth dampened in a solution of mild

detergent and water. Do not spray any liquid.

Do not use chemicals containing harsh material

such as benzene, toluene, xylene, and acetone.

Operation

Environment

Location: Indoor, no direct sunlight, dust free,

almost non-conductive pollution (Note below)

Relative Humidity: 20%- 85%, no condensation

Altitude: Maximum 2000m

Temperature: 0°C to 40°C

(Pollution Degree) EN 61010-1:2010 specifies the pollution degrees

and their requirements as follows. The PSB-1000 falls under degree

Pollution refers to “addition of foreign matter, solid, liquid, or

gaseous (ionized gases), that may produce a reduction of dielectric

strength or surface resistivity”.

Pollution degree 1: No pollution or only dry, non-conductive

pollution occurs. The pollution has no influence.

Pollution degree 2: Normally only non-conductive pollution

occurs. Occasionally, however, a temporary conductivity caused

by condensation must be expected.

Pollution degree 3: Conductive pollution occurs, or dry, non-

conductive pollution occurs which becomes conductive due to

condensation which is expected. In such conditions, equipment

is normally protected against exposure to direct sunlight,

precipitation, and full wind pressure, but neither temperature

nor humidity is controlled.

Storage

environment

Location: Indoor

Temperature: -25°C to 70°C

Relative Humidity: ≤90%, no condensation

Disposal

Do not dispose this instrument as unsorted

municipal waste. Please use a separate collection

facility or contact the supplier from which this

instrument was purchased. Please make sure

discarded electrical waste is properly recycled to

reduce environmental impact.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

PSB-1000 Series User Manual

Power cord for the United Kingdom

When using the instrument in the United Kingdom, make sure the

power cord meets the following safety instructions.

NOTE: This lead/appliance must only be wired by competent persons

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in this lead are coloured in accordance with the

following code:

Green/ Yellow:

Earth

Blue:

Neutral

Brown:

Live (Phase)

As the colours of the wires in main leads may not correspond with

the coloured marking identified in your plug/appliance, proceed

as follows:

The wire which is coloured Green & Yellow must be connected to

the Earth terminal marked with either the letter E, the earth symbol

or coloured Green/Green & Yellow.

The wire which is coloured Blue must be connected to the terminal

which is marked with the letter N or coloured Blue or Black.

The wire which is coloured Brown must be connected to the

terminal marked with the letter L or P or coloured Brown or Red.

If in doubt, consult the instructions provided with the equipment

or contact the supplier.

This cable/appliance should be protected by a suitably rated and

approved HBC mains fuse: refer to the rating information on the

equipment and/or user instructions for details. As a guide, a cable

of 0.75mm2should be protected by a 3A or 5A fuse. Larger

conductors would normally require 13A types, depending on the

connection method used.

Any exposed wiring from a cable, plug or connection that is

engaged in a live socket is extremely hazardous. If a cable or plug is

deemed hazardous, turn off the mains power and remove the cable,

any fuses and fuse assemblies. All hazardous wiring must be

immediately destroyed and replaced in accordance to the above

standard.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

GETTING STARTED

This chapter describes the power source in a

nutshell, including its main features and front /

rear panel introduction.

PSB-1000 Series Overview ............................................... 11

Series lineup.............................................................................................................. 11

Main Features........................................................................................................... 12

Accessories................................................................................................................13

Appearance ..................................................................... 15

Front Panel ...............................................................................................................15

Rear Panel (PSB-1800L/M)....................................................................................18

Rear Panel (PSB-1400L/M)....................................................................................18

Status Bar Icons ....................................................................................................... 21

Menu Reference .......................................................................................................23

Theory of Operation ........................................................ 29

Operating Area Description................................................................................... 29

CC and CV Mode .................................................................................................... 30

Slew Rate................................................................................................................... 32

Bleeder Control........................................................................................................32

Internal Resistance................................................................................................... 33

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

PSB-1000 Series User Manual

Alarms ....................................................................................................................... 34

Considerations.......................................................................................................... 36

Grounding ................................................................................................................ 39

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

GETTING STARTED

PSB-1000 Series Overview

Series lineup

The PSB-1000 Series consists of 4 models: PSB-1400L, PSB-1400M,

PSB-1800L, and PSB-1800M. Note that throughout the user manual,

the term “PSB-1000” refers to all the models in the PSB-1000 Series

lineup, unless stated otherwise.

Model name

Output Voltage

Output Current

Output Power

PSB-1400L

400

PSB-1400M

160

400

PSB-1800L

800

PSB-1800M

160

800

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

This manual suits for next models

Table of contents

Other GW Instek Power Supply manuals

GW Instek

GW Instek PSS-3203 User manual

GW Instek

GW Instek PEL-500 Series User manual

GW Instek

GW Instek PSU Series User manual

GW Instek

GW Instek PPH-1503D User manual

GW Instek

GW Instek PLR Series User manual

GW Instek

GW Instek PSB-1400M User manual

GW Instek

GW Instek SPS Series User manual

GW Instek

GW Instek PSW-Multi Series User manual

GW Instek

GW Instek ASD Series User manual

GW Instek

GW Instek PFR-100L Owner's manual

GW Instek

GW Instek GPP-1326 User manual

GW Instek

GW Instek GPS-2303 User manual

GW Instek

GW Instek PEL-3000 Series User manual

GW Instek

GW Instek PST Series Operating and maintenance manual

GW Instek

GW Instek PEL-2000A Series User manual

GW Instek

GW Instek PPX Series User manual

GW Instek

GW Instek GPE-1326 Series User manual

GW Instek

GW Instek PSU Series User manual

GW Instek

GW Instek PEL-3000AH Series User manual

GW Instek

GW Instek PSP-603 User manual

GW Instek

GW Instek PEL-3000A Series User manual

GW Instek

GW Instek ASR-2000 Series User manual

GW Instek

GW Instek PRP Series Owner's manual

GW Instek

GW Instek PSW Series Owner's manual

Popular Power Supply manuals by other brands

Monacor

Monacor PS-12CCD instruction manual

VOLTIMA

VOLTIMA MagicBox 15 Installation and operating instructions

Agilent Technologies

Agilent Technologies 6032A Service manual

Miller

Miller Auto Deltaweld 452 owner's manual

BCP

BCP PUOUBK How to install

HC 2210 manual

Puls

Puls CT5.241 installation manual

OCZ

OCZ ZX1250W Technical specifications

iseg

iseg ECH 238 manual

Power

Power XXL A Series instruction manual

Agilent Technologies

Agilent Technologies 6631B Service manual

Renogy

Renogy PHOENIX 300 user guide

HP 6200B Operating and service manual

Epson

Epson Stylus Scan 2500 Product information sheet

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 manual

Puls

Puls MiniLine ML50.100 instruction manual

Puls

Puls AS-Interface SLA4.100 installation manual

Kenwood

Kenwood PS-60 instruction manual