GROM Audio VLine NISKVL2 User manual
Content of the Touchscreen overlay kit (V-NISKRTH):
1 Touchscreen overlay panel
2 V-TOUCH Cable and TSB1 converter board
3 2pc ZIP-TIES
4 Alcohol wipe
Tools needed:
1 Scratch awl/pick
2 Phillips screwdriver
3 Wire cutter
Watch YouTube Video: bit.ly/nisk_touchscreen
1 Take the stereo assembly, touchscreen overlay kit (V-NISKRTH), and the
tools, to a flat surface We recommend using the table with good lighting
2 Remove 4 Phillips screws from both sides of vehicle's LCD screen assembly,
and remove LCD assembly from the metal bracket
Remove 2 Phillips screws from top of LCD enclosure
Remove 2 Phillips screws from bottom of LCD enclosure
Now remove the back metal cover from the LCD assembly
Using the awl tool, remove the front bezel from the LCD assembly
Remove the factory clear plastic screen cover
Remove protective plastic from the front side of the supplied touchscreen panel,
and carefully install the supplied touchscreen panel in place of the now removed
factory clear screen cover
How the new touchscreen panel should look in the front bezel, note that the 4pin
ribbon cable sits within the notch on the bezel
Remove the protective plastic film from the back side of the touchscreen panel,
and clean the screen using supplied alcohol wipe Let it dry
Other manuals for VLine NISKVL2
1
Other GROM Audio Touchscreen manuals
Popular Touchscreen manuals by other brands
Elecro Engineering
Elecro Engineering Poolsmart Plus Installation & operating manual
Johnson Controls
Johnson Controls IQ4 HUB installation manual
Elo TouchSystems
Elo TouchSystems ET2270L user manual
Elo TouchSystems
Elo TouchSystems ET1002L user manual
Elo TouchSystems
Elo TouchSystems 3201L user manual
Duratec
Duratec S15 user manual
