Green Brook T105-C Operating instructions
IMPORTANT
This unit should be installed to current IEE wiring regulations if In doubt
consult a qualified electrician.
Simplified Operating Instructions –
T105-C / T108-C / T106-C / T17 -C
utton Operations
R - Reset (with pen or other pointed instrument).
Y - Enters function setup.
+/- uttons to scroll through icons.
Y - To confirm.
N - To Exit.
YY - (Pressing ‘Y’ twice) - To enter program mode
DISPLAY DETAIL
00:00
00
PROG
DOWN
CLOCK
SUMMER
RANDOM
DISPLAYS DAY OR DAY BLOCK
ALWAYS ON
AFFIRM SETUP SELECT ADJUST CHANGE MODE EXIT
P
ROG
P
RO
G
ALWAYS OFF
SCROLL DOWN MENU APPEARS
WHEN ‘Y’ BUTTON IS PRESSED
4 OPTIONS – WHEN ‘N’ BUTTON
IS PRESSED
THESE ICONS ARE VIEWABLE WHEN
BUTTONS
‘Y’ A
ND ‘N’
ARE BEING USED
IMPORTANT
This unit should be installed to current IEE wiring regulations if In doubt
consult a qualified electrician.
Setting current time and day
STEP 1
Press t e ‘R’ button using a pencil or similar pointed instrument to reset
timer to its default settings. Pressing ‘R’ will delete all stored programmes.
STEP 2
Press ‘Y’ button to enter function setup.
(IF ANOTHER UTTON IS NOT PRESSED WITHIN 10 SECONDS THE DISPLAY WILL
REVERT TO THE NORMAL SCREEN)
IMPORTANT
This unit should be installed to current IEE wiring regulations if In doubt
consult a qualified electrician.
STEP 3
Use t e + or – button to scroll to t e clock icon (flas ing).
T en press t e Y button to enter t e current time setting mode (Hours
flas ing).
Use t e + or – button to adjust t e ours. Press Y to confirm. Minutes will
flas .
Use t e + or – button to adjust t e minutes. Press Y to confirm. Day will
flas .
Use t e + or – button to adjust t e day. Press N to exit.
If you keep the + or – buttons pressed for
more than 3 seconds, the display will enter
fast scroll mode.
Y N
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
Simplified Operating Instructions –
T105-C / T108-C / T106-C / T17 -C
Programming the switching times
There are 24 on/off programmes available.
STEP 1
Press the ‘Y’ button Twice to enter the programming setting mode.
(IF ANOTHER UTTON IS NOT PRESSED WITHIN 10 SECONDS THE DISPLAY WILL
REVERT TO THE NORMAL SCREEN)
STEP 2
Press the ‘Y’ button to confirm the programme. Hours will flash.
se the + or – button to adjust hours. Press ‘Y’ to confirm. Minutes will flash.
se the + or – button to adjust minutes. Press ‘Y’ to confirm. Days will flash.
se the + or – button to scroll through the days or day block. Press ‘Y’ to
confirm.
Note: Default is programme ‘01 ON’.
This can be changed by pressing + or – button to
Scroll through the 24 ON/OFF programmes.
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
STEP 3
Press the + button, this will select the programme O1 OFF. Press ‘Y’ to
confirm.
Now repeat as per STEP 2 to adjust hours / minutes and Day.
(Note – Day or day lock must be the same as Programme ON).
STEP 4
If no more programmes are required, press the N button to Exit.
If more programmes are required go to STEP 1 and scroll to next
programme
(i.e 02 ON) using + or – button.
Day Blocks available–
Monday to Sunday
Monday to Friday
Saturday to Sunday
Monday to Saturday
Monday + Wednesday + Friday
Tuesday + Thursday + Saturday
Monday + Tuesday + Wednesday
Thursday + Friday + Saturday
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
To cancel a programme once set
1. Press the ‘Y’ button Twice to enter the programming setting mode.
2. sing the + or – button scroll through to desired programme to cancel.
3. Programme number will flash (i.e ‘O1 ON’).
4. Press and hold ‘N’ button for more than 3 seconds – programme will be
deleted.
5. Now press the + button to select ‘O1 OFF’. Repeat instructions 2 to 4.
Reading your programmed times
•Press Y button Twice to enter programme mode.
•Press the + or – button to scroll through the 24 ON/OFF programmes
to check settings.
•Press N button to exit and revert to clock mode.
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
Simplified Operating Instructions –
T105-C / T108-C / T106-C / T17 -C
Timer Countdown Function
The Timer has a 100 hour countdown feature. i.e The timer can be set to
any period from 1 minute to 100 hours and will countdown in the ON state
and turn OFF at the end of the countdown period.
STEP 1
Press the ‘Y’ button.
se the + or – button to select the ‘DOWN’ icon.
Then press Y to enter countdown mode.
STEP 2
se the + or – button to adjust hours. Press ‘Y’ to confirm. Minutes will flash.
se the + or – button to adjust minutes. Press ‘Y’ to confirm.
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
STEP 3
•Press the N button to start the countdown.
(Output switched to ON during the countdown period)
•Press the N button to pause the countdown. (Output switched to
OFF)
•To resume countdown simply press the N button.
STEP 4
Press and hold the N button for more than 3 seconds to exit the
countdown function.
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
Simplified Operating Instructions –
T105-C / T108-C / T106-C / T17 -C
Manual Override
When in normal clock mode, pressing the ‘N’ Button will scroll through the following
switching options:
•ALWAYS N – Timer is permanently N.
•PR G (WITH CLEAR SYMB L) – Timer is in programme N mode. It will switch off at
the next programme FF mode.
•ALWAYS FF – Timer is permanently FF.
•PR G (WITH HALF CLEAR SYMB L) – Timer is in programme FF mode. It will switch
on at the next programme N mode.
Summer Time setting
STEP 1 - Press the ‘Y’ button.
STEP 2 - Use the + or - button to scroll through to ‘SUMMER’ (Flashing).
STEP 3 - Press the ‘Y’ button to access the summer time setting.
STEP 4 - Press the + or – button will toggle the ‘SUMMER’ icon on or off.
STEP 5 - Press ‘Y’ button to confirm summer setting. Time will advance 1 hour.
STEP 6 - The ‘SUMMER’ icon will appear in the display.
Use the same steps as above to remove the ‘SUMMER’ icon from the display.
IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
Random setting
The random setting allows the timer to switch N and FF with a random delay of
between 2 and 32 minutes. This function will only operate if one or more programmes
have been programmed into the timer.
STEP 1 - Press the ‘Y’ button.
STEP 2 - Use the + or - button to scroll through to ‘RAND M’ (Flashing).
STEP 3 - Press the ‘Y’ button to access the RAND M setting.
STEP 4 - Press the + or – button will toggle the ‘RAND M’ icon on or off.
STEP 5 - Press ‘Y’ button to confirm RAND M function.
STEP 6 - The ‘RAND M’ icon will appear in the display.
Timer will now operate in the RAND M mode
Use the same steps as above to remove the ‘RAND M’ icon from the display.
E. sales@greenbrook.co.uk
W. www.greenbrook.co.uk
Other manuals for T105-C
1
This manual suits for next models
3
Table of contents
Other Green Brook Timer manuals
Green Brook
Green Brook T108A-C Manual
Green Brook
Green Brook T105-C Operating instructions
Green Brook
Green Brook T612-C Installation manual
Green Brook
Green Brook T106A-C Manual
Green Brook
Green Brook T40S-C User manual
Green Brook
Green Brook T105A-C Installation and user guide
Green Brook
Green Brook T40S Manual
Green Brook
Green Brook T17B Manual
Green Brook
Green Brook TLS Manual
Green Brook
Green Brook T105A Manual
Green Brook
Green Brook T108A Manual
Green Brook
Green Brook T80-C User manual
Green Brook
Green Brook T109 Manual
Green Brook
Green Brook KingShield T106A-C Manual
Green Brook
Green Brook T612-C User manual
Green Brook
Green Brook T612-C Manual
Green Brook
Green Brook T40S-C Manual
Green Brook
Green Brook KingShield T102-C User manual
