Grandview PT-Hxx User manual
GRANDVIEW REPRODUCING GENUINE COLORS
ISO9001:2000
International Certification
Grandview Crystal Screen Canada Ltd.
#11- 3751 North Fraser Way,
Marine Way Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: 1-604-412-9777 Fax: 1-604-412-9796
Website: www.grandviewscreen.ca
Guangzhou Grandview Crystal Screen Co., Ltd.
P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,
Shiqiao, Panyu District, Guangzhou, Guangdong, China
Tel: +8620-8489-9499 Fax: +8620-8480-3343
Website: www.grandviewscreen.com
www.grandviewscreen.com.cn
GRANDVIEW REPRODUCING GENUINE COLORS
Thank you for purchasing a Grandviewprojection screen.
Before use, please read instructions carefully. After installation, storeinstructions for future reference.
Model PT-Hxx
Instruction Manual
Portable Series Tripod Screen Charming Model
16
Extension rod
Keystone
Lock button
Magic button
Adjusting
uphold bar
Housing level adjusting
mechanism
Aluminum stand
Description
Stainless bar ring
Fabric
Housing
Lift bar
Tripod
Plastic hook
Metal ring
Top bar
Plastic handle
Ignoring the safety warnings may
lead to injuries and/or damaging
the product.
Refrain from hanging anything on the
screen as it may cause the screen to
fall.
Roll up the screen after every use.
Leaving it hanging for a long period
of time may cause the fabricto loosen.
Please contact your local dealer for
repair s or maintenance. Please contact
ourcompany if you have any further
questions. Avoid taking apart the
fixtures yourself. Loose parts may
cause the screen to fall.
Warnings
Do not take apart and replacewith unknown parts. If there areany problems, please contact your localdealer.
Product specifications are subject to change.
1. Please make sure the Tripod stand is fully extending during using, this can assure stability and
safety.
2. The screen could be raised or lowered to the desired position by following the screen operation
instructions.
3. There is a nail at the middle of Top bar, please make sure it locked onto the slot nearby the
Plastic handle. Otherwise it would cause damage during carrying.
4. Push gooseneck into opening on case end cap until it locks.
5. Before carrying the screen, make sure the tripod foots are locked by toe release mechanism.
Toe releasemechanism
Gooseneck
2
5
Lock
Unlock
Lock
Unlock
Locked
condition
Unlocked
condition
Lock
Unlock
Remarks: Assure the Top bar
is locked onto the bottom bar.
Figure 16
Figure 20
Figure 21
Figure 17
Figure 18
Figure 19
Figure 4 Figure 5 Figure 6
Figure 1
Displaying the Screen
2. Open the screen in usual manner by pressing push button. (Figure 4)
3. Rotate the housing counterclockwise untill horizontal position. (Figure 5)
4. Press the Magic button to lower down Adjusting uphold bar to the lowest point. (Figure 6)
Retracting the Screen
1. Turn the lock button to LOCK position.
(Figure 16)
2. Unlock the plastic handle, raise the housing by
pulling up the hand untill a click sound, then
lock the plastic handle. (Figure 17-19)
3. Hold the Adjusting uphold bar with one hand, then
press the Magic button with another hand to lower
down the Adjusting uphold bar to lowest position.
(Figure 20)
4. Lift the bar ring from the gooseneck and slowly
complete re-rolling the screen fabric into the
housing, swing the housing into vertical position,
push gooseneck into opening on case end cap
until it locks. (Figure 21)
1. Grasp the plastic handle with one hand, hold the housing with another hand, step on the toe release
mechanism to fully stretch the tripod on the ground. (Figure1-3)
Figure 2
Figure 3
34
Locked
condition
Housing
position lock
Lock
Unlock
Unlocked
condition
Lock
Unlock
Lock
Unlock
Figure 7 Figure 8
Figure 9 Figure 10
Figure 11 Figure 13
Figure 12
Figure 14
Figure 15
5. Displaying the screen:
Method 1: Lift and hang the Stainless bar ring onto the Plastic hook. (Figure 7-8)
Method 2: Raise the extension rod and secure by hooking rig over gooseneck, lift the screen fabric
and hook it on the one of the slots in the eliminator. You could choose from the three slots according
to the degree of tilt of the surface. (Figure 9 - 10)
6. To meet different viewing height (from floor to housing), you can adjust the position of housing via
the Plastic handle. (Figure 11)
Method: Turn the lock button to Unlock position, unlock the plastic handle, lower down the
housing by pulling down the plastic handle to desired position , then lock the plastic handle.
(Figure 12-13)
7. Grasp bottom bar firmly with one hand, grasp and raise adjusting bar with another hand. (Figure 14)
Remarks: You don't need to press the Magic button while raise the Adjusting uphold bar. The screen
viewing area can display in 1:1, 4:3 or 16:9 format according to different height of Adjusting uphold
bar and height of housing.
Special Housing adjusting system
If the housing is a little inclined when fully displayed, it could be adjusted by adjusting the Housing
level adjusting mechanism. (Figure 15)
Housing level adjusting
mechanism
Other Grandview Camera Accessories manuals
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
