Graco XTR 7 User manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

For use with Protective Coating Materials

XTR 7, Part No. 248609

Heavy Duty RAC tip guard, no tip

7250 psi (50 MPa, 500 bar) Maximum Working Pressure

XTR 7, Part No. 248610

Standard (non-reversing) Dripless™Tip Guard, 519 Flat Tip

7250 psi (50 MPa, 500 bar) Maximum Working Pressure

XTR 7, Part Nos. 248611, 248612, 248613, 248614

Heavy Duty RAC tip guard, 519 SwitchTip™

7250 psi (50 MPa, 500 bar) Maximum Working Pressure TI5045A

310743A

Instructions

XTR™7 Airless

Spray Gun

Read warnings and instructions.

ll 2 G

2310743A

Contents

Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . 3

System Requirements . . . . . . . . . . . . . . . . . . . . . . . 6

Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Gun Trigger Safety . . . . . . . . . . . . . . . . . . . . . . . . . 8

Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Pressure Relief Procedure . . . . . . . . . . . . . . . . . . 10

Operating Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting Spray Pattern . . . . . . . . . . . . . . . . . . 14

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Flushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cleaning Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

XTR 7 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

XTR 7 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Part Nos. 248609, 248611, 248612, 248613,

248614 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

XTR 7 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Part No. 248610 . . . . . . . . . . . . . . . . . . . . . . . . 32

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

XTR 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Graco Standard Warranty . . . . . . . . . . . . . . . . . . . 34

Graco Phone Numbers . . . . . . . . . . . . . . . . . . . . . 34

Manual Conventions

310743A 3

Manual Conventions

Warning Caution

Note

WARNING

A warning alerts you to possible serious injury or

death if you do not follow instructions.

Symbols, such as fire and explosion (shown), alert you

to a specific hazard and direct you to read the indi-

cated hazard warnings on pages 4-5.

CAUTION

A caution alerts you to possible equipment damage or

destruction if you do not follow instructions.

A note indicates additional helpful information.

Manual Conventions

4310743A

Warning

Injection Hazard

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just

a cut, but it is a serious injury that can result in amputation. Get immediate medical attention.

• Do not point the gun at anyone or at any part of the body.

• Do not put your hand or fingers over the gun fluid nozzle.

• Do not stop or deflect leaks with your hand, body, glove, or rag.

• Do not “blow back” fluid; this is not an air spray system.

• Follow Pressure Relief Procedure, page 10, when you stop spraying and before cleaning, checking,

or servicing equipment.

• Use lowest possible pressure when flushing, priming, or troubleshooting.

• Never spray without tip guard and trigger guard installed.

• Engage trigger lock when not spraying.

• Tighten all fluid connections before operating the equipment.

• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. High pres-

sure hose cannot be recoupled; replace the entire hose.

Fire and Explosion Hazard

Solvent and paint fumes in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Eliminate all ignition sources, such as pilot lights, cigarettes and plastic drop cloths (potential static

arc).

• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

• Keep the work area free of debris, including solvent, rags, and gasoline.

• Ground equipment and conductive objects. See Grounding, page 7.

• Hold gun firmly to side of grounded pail when triggering into pail.

• Use only grounded hoses.

• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment

until you identify and correct the problem.

Burn Hazard

This equipment is used with heated fluid, which can cause equipment surfaces to become very hot. To

avoid severe burns:

• Do not touch hot fluid or equipment.

• Allow equipment to cool completely before touching it.

• Wear gloves if fluid temperature exceeds 110° F (43° C).

Manual Conventions

310743A 5

Equipment Misuse Hazard

Misuse can cause serious injury or death.

• For professional use only.

• Use equipment only for its intended purpose. Call your Graco distributor for information.

• Read manuals, warnings, tags, and labels before operating equipment. Follow instructions.

• Check equipment daily. Repair or replace worn or damaged parts immediately.

• Do not alter or modify equipment. Use only Graco parts and accessories.

• Do not exceed the maximum working pressure or temperature rating of the lowest rated system com-

ponent. See Repair in all equipment manuals.

• Use fluids and solvents that are compatible with equipment wetted parts. See Repair in all equip-

ment manuals. Read fluid and solvent manufacturer’s warnings.

• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

• Do not use hoses to pull equipment.

• Comply with all applicable safety regulations.

Toxic Fluid or fumes Hazard

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swal-

lowed.

• Read Material Safety Data Sheet (MSDS) to know the specific hazards of the fluids you are using.

• Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear proper protective equipment when operating, servicing, or when in the operating area of

the equipment to help protect you from serious injury, including eye injury; inhalation of toxic fumes, and

hearing loss. This equipment includes but is not limited to:

• Protective eye wear

• Gloves, clothing, and respirator as recommended by the fluid and solvent manufacturer

• Hearing protection

Recoil Hazard

The gun can recoil when triggered at very high pressure. If unprepared, this could force your hand back

or cause you to fall and injure yourself. Be sure you have firm footing and hold the gun securely.

Warning

System Requirements

6310743A

System Requirements

• Install a bleed-type master air valve on a pneumatic pump air supply line to relieve air trapped between this valve and

the pump after air regulator is shut off. Trapped air can cause the pump to cycle unexpectedly.

• Install a fluid drain valve between the pump and gun to relieve pressure in displacement pump, hose, and gun. Trig-

gering gun to relieve pressure may not be sufficient. See Pressure Relief Procedure, page 10.

Grounding

310743A 7

Grounding

Check your local electrical code and pump/sprayer manual for detailed grounding instructions.

•Spray gun: ground through connection to a grounded fluid hose and pump/sprayer.

•Fluid hose: use only grounded hoses.

•Fluid supply container: follow local code.

•Object being sprayed: follow local code.

WARNING

Read warnings, page 3.

•Solvent flushing pails: follow local code. Use only con-

ductive metal pails placed on a grounded surface. Do

not place pail on a non conductive surface, such as

paper or cardboard, which interrupts grounding continu-

ity. TI11021 TI11022

•To maintain grounding continuity when flushing or

relieving pressure: hold metal part of gun firmly to side

of grounded metal pail, then trigger gun.

TI5047A

TI5046A

Gun Trigger Safety

8310743A

Gun Trigger Safety

WARNING

Read warnings, page 3.

A wallet-sized warning card with important injec-

tion treatment information is included with the gun.

Additional cards are available at no charge. Pro-

vide a card to all operators.

1. To engage trigger lock: turn it to position A. If engaged,

gun will not trigger. Engage trigger lock whenever you stop

spraying to avoid accidental triggering

2. To disengage trigger lock: turn it to position B.

Ti1950A

Ti1949A

Important

310743A 9

Important

Do not try to unscrew the gun housing from the handle. Do not use a vice grips or place the gun in a vice to separate the

gun handle from the head. Separating the gun head from the handle in this way may damage or break off the alignment

notch on the gun handle.

Trigger Lock Positions

Locked

Unlocked (Disengaged) (Engaged)

Ti1948A Ti1949A

Pressure Relief Procedure

10 310743A

Pressure Relief Procedure

WARNING

Read warnings, page 3.

1. Engage trigger lock.

TI5049A

2. Shut off pump.

3. Disengage trigger lock.

TI5048A

4. Hold a metal part of the gun firmly to a grounded metal pail.

Trigger gun to relieve pressure.

T12178A

Other manuals for XTR 7

This manual suits for next models

Table of contents

Other Graco Paint Sprayer manuals

Graco

Graco 695 Premium Hi User manual

Graco

Graco Dura-Flo 600 User manual

Graco

Graco GX21 Cordless Guide

Graco

Graco Gusmer Power-Lock 246045 Parts list manual

Graco

Graco 918316 Operation manual

Graco

Graco 25A536 User manual

Graco

Graco Mark X 240 Volt User manual

Graco

Graco EasyMax WP 258849 User manual

Graco

Graco 232267 Operation manual

Graco

Graco 245095 Assembly instructions

Graco

Graco 235-463 Operation manual

Graco

Graco 311321H Quick start guide

Graco

Graco Edge 256855 User manual

Graco

Graco 232903 Operating instructions

Graco

Graco 309674M Operating instructions

Graco

Graco SERIES J Operation manual

Graco

Graco XM Series Use and care manual

Graco

Graco InvisiPac AFS 17D749 Parts list manual

Graco

Graco Contractor II User manual

Graco

Graco LINE LAZER A Series Datasheet

Graco

Graco DutyMax EH 230DI User manual

Graco

Graco ULTRAX MAX 1595 232164 Instruction Manual

Graco

Graco ULTRA MARK X Manual

Graco

Graco HVLP EDGE Gun 256855 Operating instructions

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

DeVilbiss

DeVilbiss LUNA2i Operation manual

WAGNER

WAGNER W 125 manual

My Clean Buddy

My Clean Buddy PW018 user manual