Graco VIBRA-FLO 17P002 Guide

3A4696B

Operation, Parts

VIBRA-FLO™Texture

Hopper

For professional use only.

Not approved for use in explosive atmosphere or hazardous locations.

Models: 17P002, 17P196

Important Safety Instructions

Read all warnings and instructions in this manual and related manuals.

Be familiar with the controls and the proper usage of the equipment.

Save these instructions.

ti30745a

www.graco.com/techsupport

?? ??

Warnings

23A4696B

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this

equipment. The exclamation point symbol alerts you to a general warning and the hazard

symbols refer to procedure-specific risks. When these symbols appear in the body of this

manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols

and warnings not covered in this section may appear throughout the body of this manual

where applicable.

GROUNDING

This product must be grounded. In the event of an electrical short circuit, grounding

reducestheriskofelectricshockbyprovidinganescapewirefortheelectriccurrent.

This product is equipped with a cord having a grounding wire with an appropriate

groundingplug.Theplugmustbepluggedintoanoutletthatisproperlyinstalledand

grounded in accordance with all local codes and ordinances.

•Improper installation of the grounding plug is able to result in a risk of electric

shock.

•When repair or replacement of the cord or plug is required, do not connect the

grounding wire to either flat blade terminal.

•The wire with insulation having an outer surface that is green with or without

yellow stripes is the grounding wire.

•Checkwithaqualifiedelectricianorservicemanwhenthegroundinginstructions

are not completely understood, or when in doubt as to whether the product is

properly grounded.

•Donotmodifythe plug provided;ifitdoes notfittheoutlet, have the properoutlet

installed by a qualified electrician.

•Thisproductisforuseonanominal230Vcircuitandhasagroundingplugsimilar

to the plugs illustrated below.

•Only connect the product to an outlet having the same configuration as the plug.

•Do not use an adapter with this product.

Extension Cords:

•Use only a 3-wire extension cord that has a grounding plug and a grounding

receptacle that accepts the plug on the product.

•Makesureyourextensioncordisnotdamaged.Ifanextensioncordisnecessary

use 12 AWG (2.5mm2) minimum to carry the current that the product draws.

•An undersized cord results in a drop in line voltage and loss of power and

overheating.

ti24583a

Warnings

3A4696B 3

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Always wear appropriate gloves, eye protection, and a respirator or mask when

painting.

•Donotoperate orspray near children.Keepchildren awayfromequipmentat all

times.

•Do not overreach or stand on an unstable support. Keep effective footing and

balance at all times.

•Stay alert and watch what you are doing.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not kink or over-bend the material or air hose.

•Do not expose the hose to temperatures or to pressures in excess of those

specified by Graco.

•Do not use the hose as a strength member to pull or lift the equipment.

•Do not alter or modify equipment. Alterations or modifications may void agency

approvals and create safety hazards.

•Makesureallequipment israted andapproved for theenvironmentin which you

are using it.

ELECTRIC SHOCK HAZARD

This equipment must be grounded.Improper grounding, setup, or usage of the

system can cause electric shock.

•Turn off and disconnect power cord before servicing equipment.

•Connect only to grounded electrical outlets.

•Use only 3-wire extension cords.

•Ensure ground prongs are intact on power and extension cords.

•Do not expose to rain. Store indoors.

•Wait five minutes after disconnecting power cord before servicing.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent

seriousinjury,includingeyeinjury,hearingloss,inhalationoftoxicfumes,andburns.

This protective equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and

solvent manufacturer.

VIBRA-FLO Shaker Adjustment

43A4696B

VIBRA-FLO Shaker Adjustment

The VIBRA-FLO shaker is shipped preset for

the best performance. The speed is adjusted

by adjusting the VIBRA-FLO knob on the

control.

1. Turn VIBRA-FLO shaker ON/OFF

switch to the ON position.

2. Turn VIBRA-FLO knob to maximum.

3. If the VIBRA-FLO shaker is making

excessive noise turn the VIBRA-FLO

knobtoa lowersetting.Dependingupon

the supply voltage the shaker may not

operate if the VIBRA-FLO is set too low.

4. If the armature and coil needs

adjustment,use afeeler gauge to adjust

shaker gap. Set gap to 0.042 – 0.052

inch (1.06 – 1.32 mm).

ti30652a

ti30206a

ti30151a

ti30152a

ti30153a

ti30154a

ti30155a

Notes

3A4696B 5

Notes

VIBRA-FLO Texture Hopper Parts

63A4696B

VIBRA-FLO Texture Hopper Parts

36 37

34 35

17a

610

1514

ti30209a

137

12c

12b

12a

Ref. Torque Ref. Torque

30-40 in-lb (3.4 - 4.5 N•m) 45-50 in-lb (5.1 - 5.7 N•m)

170-190 in-lb (19.2 - 21.5 N•m)

VIBRA-FLO Texture Hopper Parts

3A4696B 7

VIBRA-FLO Texture Hopper Parts List

Ref. Part Description Qty.

1 288062 FRAME, hopper,

painted 1

2 17R349 ASSEMBLY, hopper

includes 6 1

3 113956 BOLT, carriage 4

4 17N821 BOLT, carriage 4

5 15H631 CLAMP 1

6 194420 GROMMET, hopper 1

7 115735 PLUG, 2” O.D. 1

8 17N820 SPACER, shaker 4

9 ASSEMBLY, shaker,

see VIBRA-FLO

Control Parts, page 9

10 110996 NUT, hex, flange head 4

11 15H635 PLUG, hopper 1

12 CORD, shaker,

control, see

VIBRA-FLO Shaker

Parts, page 8

12a 287121 CORD, set, Italy,

Denmark, Switzerland 1

12b 242001 CORDSET, adapter,

CEE 7/7, Europe 1

12c 128206 CORDSET, CEE 7/7,

Europe, Schuko,

Model 17P196

14 156306 WASHER, flat 2

15 116038 WASHER, wave

spring 2

16 15E891 CLIP, retaining 2

17 119420 WHEEL, pneumatic 2

17a 253132 KIT, repair, tube 1

19 112958 NUT, hex, flanged 4

20 246331 HOSE, drain includes

21 1

21 241920 DEFLECTOR,

threaded 1

22 116756 FITTING, elbow, 45° 1

26 116281 CORD, power, Model

17P002 1

30 121249 LOCK, cord 1

34 17R130 PLATE, back, box,

control 1

35 17R475 GASKET, plate 1

36 BOX, control, shaker

see VIBRA-FLO

Control Parts, page 9

37 107257 SCREW, thread

forming 2

41189930 LABEL, warning 1

137 121249 RETAINER, plug

adapter 1

Replacement Danger and Warning

labels,tags, andcardsare availableat no

cost.

Ref. Part Description Qty.

VIBRA-FLO Shaker Parts

83A4696B

VIBRA-FLO Shaker Parts

to Power Cord

to Shaker

Control

to Shaker

Control

13 11

ti30208a

Ref. Torque Ref. Torque

170-190 in-lb (19.2 - 21.5 N•m) 80-100 in-lb (9.0 - 11.2 N•m)

Ref. Part Description Qty.

1 17N610 PLATE, shaker 1

2 17N607 BRACKET, mounting,

armature 1

3 17R135 COIL,electromagnetic,

230V 1

4 17N606 BLOCK, armature 1

5 111800 SCREW, cap, HH 2

6 113161 SCREW, flange, HH 7

7 110755 WASHER, flat 3

8 17P261 CLAMP, loop,

cushioned 3

9 100527 WASHER, flat 2

11 17P658 GUARD, shaker 1

12 17R136 CORD, control, shaker 1

13 17P396 LABEL, branding,

shaker 1

Ref. Part Description Qty.

VIBRA-FLO Control Parts

3A4696B 9

VIBRA-FLO Control Parts

ref 35

to Shaker Coil

To Power Cord

ref 34

ti30746a

Ref. Torque Ref. Torque

10-15 in-lb (1.1 - 1.7 N•m) Hand tighten

22-28 in-lb (2.5 - 3.2 N•m) 30-35 in-lb (3.4 - 3.9 N•m)

Ref. Part Description Qty.

1 17S078 ENCLOSURE, control 1

2 260067 FITTING, strain relief,

1/2 NPT 1

3 17S020 BOARD, control, shaker 1

4 17R471 INSULATOR, box 1

5 195429 SWITCH, toggle 1

6 117625 NUT, locking 1

7 17S079 FILTER, power line 1

8 195428 BOOT, toggle 1

9 17J017 LABEL 1

10 116167 KNOB, potentiometer 1

11 114391 SCREW, grounding 2

12 17R347 LABEL, control, shaker 1

13 119775 NUT, panel 1

14 17P082 JUMPER, brown, not

shown, see page 10 1

15 113505 NUT, keps, hex head 2

17S012 CONTROL, shaker,

complete includes 1 –15 1

Ref. Part Description Qty.

Wiring Diagram

10 3A4696B

Wiring Diagram

TOGGLE

SWITCH

ENCLOSURE GROUND SCREWS NUT

(2X)

CONTROL

BOARD

POTENTIOMETER JUMPER

WIRE

JUMPER

WIRE

JUNCTION BOX

SUB-ASSEMBLY

FROM

SHAKER

COIL

FROM

POWER

CORD

STRAIN

RELIEF (1X)

SHAKER CONTROL WIRING DIAGRAM

BROWN

LINE IN

LOAD

BROWN

BLUE

GREEN

BLUE

ti30747a

This manual suits for next models

Table of contents

Other Graco Paint Sprayer manuals

Graco

Graco ProMix PD2K Use and care manual

Graco

Graco 218-745 Operation manual

Graco

Graco Series E Instruction Manual

Graco

Graco True Airless ProLTS 190 User manual

Graco

Graco LT Series Parts list manual

Graco

Graco Ultra-Lite 240-200 Operation manual

Graco

Graco Ultra 395 User manual

Graco

Graco 248037 Assembly instructions

Graco

Graco 2K device EcoMix 2000 Operation manual

Graco

Graco 25R757 Guide

Graco

Graco Edge 257092 Operating instructions

Graco

Graco dutymax gh 300 Operating instructions

Graco

Graco 395st Pro User manual

Graco

Graco e-Xtreme Z60 User manual

Graco

Graco GMAX II 5900HD Instruction Manual

Graco

Graco 190ES 261825 User manual

Graco

Graco SaniSpray HP 20 Use and care manual

Graco

Graco SDX Operating instructions

Graco

Graco PRO AA5500SC Datasheet

Graco

Graco Hydra-Spray EH 433 GT Series Operation manual

Graco

Graco Delta Spray 308741N User manual

Graco

Graco Glascraft GC-1387J User manual

Graco

Graco LineLazer 3400 Operating instructions

Graco

Graco FUSION 309550U Operation manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

DeVilbiss

DeVilbiss LUNA2i Operation manual

WAGNER

WAGNER W 125 manual

My Clean Buddy

My Clean Buddy PW018 user manual