Gofanco HDwireless200 User manual

Wireless HDMI Extender

Kit 1080P - 200m

User's Guide

G4-0030A

P/N:HDwireless200

Thank you for purchasing from gofanco. Our products

aim to meet all your connectivity needs wherever you

go. For optimum performance and safety, please read

the instructions carefully and keep this User's Guide for

future reference. If you need more information about

our products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. Fordrivers/manualsdownload,

please go to http://www.gofanco.com/download.

Important Safety Notices

Pleasereadsafetyinstructionscarefullybeforeinstallation

and operation.

• Please pay close attention to all warnings and hints

for this device

• Do not expose this unit to rain, heavy moisture, or

liquid

• Do not put any items into the device or attempt to

modify its operation

• Do not repair the device or open the enclosure

without professional guidance to avoid electric

shocks. Doing so may void your warranty

• Keep the product in a well-ventilated location to

avoid damage from overheating

• Shut off power and make sure environment is safe

before installation

• Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid cable

damage. Make sure they are plugged into the

correct ports

• Use the included DC5V power adapters only. Make

sure the specification matches if using 3rd-party

DC power adapters

Introduction

The Wireless HDMI Extender Kit 1080p - 200m extends

high definition HDMI signals wirelessly from a source

device to a display device up to 200 meters with the

advanced application of HDBitT transport protocol and

wireless technology. It requires no cables between the

transmitter(TX) andreceiver(RX), makingtheinstallation

easy and clean. Great for homes and offices.

Note: Wireless transmission distance will vary due

to the environmental conditions. Thick walls, brick,

glass or electronic interference will shorten the

wireless transmission distance or cause signal loss.

Features

• Transmits HDMI signals from source device to

display device up to 200 meters wirelessly

• Supports IR remote control function to control the

source device from long distances

• No cables required between transmitter (TX) and

receiver (RX)

• Easy and clean installation

PackageContents

IR Blaster Extension

Cable (1pc)

Receiver (RX) (1pc)

DC5V/2A Power

Adapter (2pcs)

Transmitter (TX) (1pc)

IR Receiver Extension

Cable (1pc) User's Guide (1pc)

Installation Requirements

1. HDMI source device (DVD player, PS3, XBOX, set

top box, PC, etc.)

2. HDMI display device (SDTV/Monitor, HDTV/

Monitor, projector, etc.)

3. HDMI Cables (not included)

Product Layout

Figure 1: Transmitter (TX)

1. Power LED Lights up when the transmitter is powered on

2. Data Transmission LED Blinks slowly when searching for device

Blinks fast when device is detected successfully

3. Connection LED Lights up when the wireless signal is connected

4. Antennas Transmits wireless signals

5. Power Adapter Jack Connects to the included power adapter

6. Reset Button Press the button to reset the transmitter

7. HDMI Input Port Connects to the HDMI Source Device

8. IR Blaster Extension Cable Port Connects to the IR Blaster Extension Cable

Figure 2: Receiver (RX)

1. Power LED Lights up when the receiver is powered on

2. Data Transmission LED Blinks slowly when searching for device

Blinks fast when device is detected successfully

3. Connection LED Lights up when the wireless signal is connected

4. Antennas Transmits wireless signals

5. Power Adapter Jack Connects to the included power adapter

6. Reset Button Press the button to reset the receiver

7. HDMI Output Port Connects to the HDMI Display Device

8. IRReceiver Extension Cable Port Connects to the IR Receiver Extension Cable

Hardware Installation

1. Power off all devices including your HDMI source

and HDMI display.

2. Install the included antennas to the TX and RX.

3. Connect your HDMI source device to the

Transmitter'sHDMIInputconnectorwithanHDMI

cable (HDMI cable not included).

4. Optional: Connect the IR Blaster Extension Cable

to the Transmitter's IR interface port. Face the eye

towards your HDMI source device's IR window.

This connection is needed only if you need to

control your HDMI source from the remote

location.

5. Connect your HDMI display to the Receiver's

HDMI Output connector with an HDMI cable

(HDMI cable not included).

6. Optional: Connect the IR Receiver Extension Cable

to the Receiver's IR interface port. This connection

is needed only if you need to control your HDMI

source from the remote location.

7. Plug the included power adapters into the

Transmitter's and Receiver's Power Jacks, then

plug both power adapters into reliable power

outlets.

8. Power on your HDMI source device and HDMI

display.The wireless extender is ready for use.

Note: For optimal signal range, install in a clear

environmentwithfewobstacles. Wirelesssignals

from other devices, such as microwaves, wireless

mice and keyboard, etc. may interfere with

transmission. Contactourtechnicalsupportteam

if you have specific questions

Notice

• Wireless signals transmitted through walls, glass,

brick or other solid objects will cause signal loss

and decrease the transmission distance

• Externalwirelesssignalsfrommicrowaves, wireless

mice and wireless keyboards will interfere with

HDMI signal transmission

• Keep the unit in a well ventilated environment to

prevent it from overheating

•DONOTexposethe unit to rain, moisture,orliquids

•DO NOT place anything on the unit

•DO NOT open the housing, doing so will void the

warranty and may cause personal injury due to

electronic hazard

•DO NOT plug-in or remove the IR extension cables

when the unit is powered on

Figure 3: IR Application

IR Application

Transmitter (TX)

Receiver (RX)

FAQ & Solutions

Q: Whatifmy displayshows"Waitingforconnection..."

on the bottom right corner?

A: Please check if the power adapters of Transmitter

(TX) and Receiver (RX) are connected and power

LED is ON.

Q: The display says, "Please check the TX input signal"

A: 1) Please check if there is HDMI signal input from

the Transmitter (TX) unit.

2) Use different HDMI cables.

3) If it's still not working, connect the HDMI source

device to the TV directly to see if there's a signal.

Q: The display is not clear or stable.

A: 1) Please adjust the position of Transmitter and

Receiver units and make sure they are within the

required signal range.

2) Check the HDMI cable lengths are within 2m.

3) Check the transmission distance is within 200m

(line-of-sight).

4) Press the "Reset" button on the Transmitter and

Receiver units and reconnect.

5) Remove other wireless signals and move any

obstacles that are blocking the signal line-of-sight.

6) Decrease the distance between the transmitter

unit and the receiver unit.

Specifications

Item Specification

HDMI Signal Fully compatible with HDCP

Transport Protocol HDBitT

Resolution

480i@60Hz, 480P@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

IR Remote Control Supports 20kHz~60kHz IR remote devices

Transmission Distance Up to 200m at 1080P@60Hz

Operating Temperature 32° - 140° F (0° - 60° C)

Power Adapter Output: DC5V/2A

Power Consumption TX: <8.5W / RX: <5.5W

Housing Material Metal

Product Dimensions (TX & RX) 7.7" (W) x 4.4" (D) x 1.2" (H)

Weight TX: 1.17 lbs / RX: 1.16 lbs

Color Black

Blank Page

Table of contents

Other gofanco Extender manuals

gofanco

gofanco HDBaseT-HD20 User manual

gofanco

gofanco PRO-HDBaseT-U User manual

gofanco

gofanco HDExt24-HD20 User manual

gofanco

gofanco HD20Ext1xN User manual

gofanco

gofanco HDBaseT User manual

gofanco

gofanco USBCwireless User manual

gofanco

gofanco 4K120 User manual

gofanco

gofanco prophecy PRO-HDRextract User manual

gofanco

gofanco HDEXT120ESD User manual

gofanco

gofanco HDbitT8P User manual

gofanco

gofanco HDExt50 User manual

gofanco

gofanco HDwireless150 User manual

gofanco

gofanco HDwireless10x1 User manual

gofanco

gofanco HDbitT4K User manual

gofanco

gofanco HDbitT4Pv2 User manual

gofanco

gofanco HD20wireless User manual

gofanco

gofanco HDwireless100 User manual

gofanco

gofanco G4-0014A User manual

gofanco

gofanco Prophecy PRO-HDExtIP-TX User manual

gofanco

gofanco HD14Ext User manual

gofanco

gofanco HD14Ext-EDID User manual

gofanco

gofanco HD20Ext-Cas User manual

gofanco

gofanco HDExt70 User manual

gofanco

gofanco HDwireless1x4 User manual

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual

gofanco HDwireless200 User manual

Popular Extender manuals by other brands