Godox LEDP120C User manual

LED Video Light

型号: LEDP120C

Instruction Manual | 说明手册

Chinese English Bilingual | 中英文双语

705-L12000-05

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: [email protected]

http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Made In China

Foreword

Thank you for purchasing this Godox product!

LEDP120C video light is excellent for macrophotography, wedding shooting, product

shooting, photojournalistic and video recording, etc. The lightweight and portable light

provides high brightness, convenient operation and accurate color temperature.

Features:

● High-quality LED bulbs

● Using lithium battery with great portability

● Soft and even illumination

● Included with a L-type bracket

● Adjustable light brightness and color temperature

● Fits almost any cameras and camcorders

Type

Changeable Version(Color Temperature 3300K~5600K)

Model

LEDP120C

Body

Parts

116 LED Beads

L-type Bracket

ON/OFF

Power Switch

Battery Indicator

Button

Select Dial for

Light Brightness

Select Dial for

Color Temperature

DC Power Jack

Lithium Battery

Compartment

Battery Unlock Button

1/4″ Bracket Mounting Hole

Warning

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be sent to

an authorized maintenance center.

Keep out of reach of children.

As this product do not have waterproof function, please take measures of waterproof

in rainy or damp environment.

Do not use or store the product if the ambient temperature reads over 50 ℃.

Do not use the flash unit in the presence of flammable gases, chemicals and other

similar materials. In certain circumstance, these materials may be sensitive to the

strong light emitting from this flash unit and fire or electromagnetic interference may

result.

Observe precautions when handling batteries

Do not put batteries into a fire or apply direct heat to them.

Batteries are prone to leakage when fully discharged. To avoid damage to the

product, be sure to remove batteries when the product is not used for a long time

or when batteries run out of charge.

Should liquid from the batteries come into contact with skin or clothing, rinse

immediately with fresh water.

Heat Dissipation Hole

Foreword

Thank you for purchasing this Godox product!

LEDP120C video light is excellent for macrophotography, wedding shooting, product

shooting, photojournalistic and video recording, etc. The lightweight and portable light

provides high brightness, convenient operation and accurate color temperature.

Features:

● High-quality LED bulbs

● Using lithium battery with great portability

● Soft and even illumination

● Included with a L-type bracket

● Adjustable light brightness and color temperature

● Fits almost any cameras and camcorders

Type

Changeable Version(Color Temperature 3300K~5600K)

Model

LEDP120C

Body

Parts

116 LED Beads

L-type Bracket

ON/OFF

Power Switch

Battery Indicator

Button

Select Dial for

Light Brightness

Select Dial for

Color Temperature

DC Power Jack

Lithium Battery

Compartment

Battery Unlock Button

1/4″ Bracket Mounting Hole

Warning

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be sent to

an authorized maintenance center.

Keep out of reach of children.

As this product do not have waterproof function, please take measures of waterproof

in rainy or damp environment.

Do not use or store the product if the ambient temperature reads over 50 ℃.

Do not use the flash unit in the presence of flammable gases, chemicals and other

similar materials. In certain circumstance, these materials may be sensitive to the

strong light emitting from this flash unit and fire or electromagnetic interference may

result.

Observe precautions when handling batteries

Do not put batteries into a fire or apply direct heat to them.

Batteries are prone to leakage when fully discharged. To avoid damage to the

product, be sure to remove batteries when the product is not used for a long time

or when batteries run out of charge.

Should liquid from the batteries come into contact with skin or clothing, rinse

immediately with fresh water.

Heat Dissipation Hole

Power Management

1. Power Supply

Two power supply modes is available:

● Using lithium battery: This light uses SONY NP-F970 model lithium battery.

Note: When using lithium battery, press the Battery Indicator Button and the battery

level will be displayed.

2. Installing Lithium Battery

● Turn the Power Switch off.

● Target the socket of the lithium battery

towards the "+" "-" contacts of the Battery

Compartment. Push the battery in until it

locks.

● Power the light on.

● After using the light, please power it off.

● When removing the battery, hold down

the Battery Unlock Button and push out

the battery in the opposite direction of pushing in.

Using the Video Light

1. On the Camera

● Install the L-type Bracket onto the 1/4″ Bracket

Mounting Hole and tighten the upper locking

ring of the L-type Bracket.

● Screw the lower locking ring of the L-type

Bracket to the highest point and insert the

Camera Hotshoe Connection horizontally into the

hotshoe of a camera or a camcorder. Tighten the

lower locking ring.

2. By the Handle

● Install the L-type Bracket onto the 1/4″ Bracket

Mounting Hole and tighten the upper locking ring

of the L-type Bracket.

3. On the Light Stand

● Install the light stand onto the 1/4″ Bracket

Mounting Hole

Note: If your camcorder has no hotshoe connection, it is advised to purchase a

camcorder connecting bracket in the market and install the video light through

its 1/4″ Bracket Mounting Hole.

Battery Indicator

Button

● Using DC power jack: Please choose the DC 9.0V 1.5A adapter whose DC head's

inside diameter is 1.3mm.

3. Connecting DC Power Adapter

● Turn the Power Switch off.

● Insert the DC head of the adapter into the DC power jack, and power the light on.

● Please power it off and disconnect the DC power source after using.

Power Management

1. Power Supply

Two power supply modes is available:

● Using lithium battery: This light uses SONY NP-F970 model lithium battery.

Note: When using lithium battery, press the Battery Indicator Button and the battery

level will be displayed.

2. Installing Lithium Battery

● Turn the Power Switch off.

● Target the socket of the lithium battery

towards the "+" "-" contacts of the Battery

Compartment. Push the battery in until it

locks.

● Power the light on.

● After using the light, please power it off.

● When removing the battery, hold down

the Battery Unlock Button and push out

the battery in the opposite direction of pushing in.

Using the Video Light

1. On the Camera

● Install the L-type Bracket onto the 1/4″ Bracket

Mounting Hole and tighten the upper locking

ring of the L-type Bracket.

● Screw the lower locking ring of the L-type

Bracket to the highest point and insert the

Camera Hotshoe Connection horizontally into the

hotshoe of a camera or a camcorder. Tighten the

lower locking ring.

2. By the Handle

● Install the L-type Bracket onto the 1/4″ Bracket

Mounting Hole and tighten the upper locking ring

of the L-type Bracket.

3. On the Light Stand

● Install the light stand onto the 1/4″ Bracket

Mounting Hole

Note: If your camcorder has no hotshoe connection, it is advised to purchase a

camcorder connecting bracket in the market and install the video light through

its 1/4″ Bracket Mounting Hole.

Battery Indicator

Button

● Using DC power jack: Please choose the DC 9.0V 1.5A adapter whose DC head's

inside diameter is 1.3mm.

3. Connecting DC Power Adapter

● Turn the Power Switch off.

● Insert the DC head of the adapter into the DC power jack, and power the light on.

● Please power it off and disconnect the DC power source after using.

Operation

1. Before Usage

● Insert the lithium battery or DC power adapter.

● Switch the power on, the video light giving out light.

2. Light Brightness/Color Temperature Adjustment

Adjusting Light Brightness

● Turn the Select Dial for Light Brightness to adjust the light brightness.

Color Temperature

3300K~5600K

Model

Changeable Version

(LEDP120C)

Light Brightness Range

10%~100%

Adjusting Color Temperature

● Turn the Select Dial for Color Temperature to adjust color temperature.

Color temperature range:

What’s in the Box of LEDP120C?

Included Item

LEDP120C Video Light

L-type Bracket

NO.

LEDP120C(3300K~5600K)

1 PC

LEDP120C Video Light L-type Bracket

* Product design and specifications are subject to change without notice.

Technical Data

Video Light

Power Source

Power

Color Temperature

Brightness(LUX)

Color Rendering Index

TLCI(Qa)

Light Brightness

Range

LED Beads Quantity

Operation Temperature

Dimension

Net Weight

Changeable Version

LEDP120C

7.4V Lithium Battery (NP-F970 model lithium battery)

(sold separately) & 9.0V 1.5A Adapter (sold separately)

Max. 12W

5600K±300K

580 (0.5m/4500K)

630 (0.5m/3300K)

680 (0.5m/5600K)

>95

10%~100%

116

-5°~50°C

175mm*130mm*17mm (not with the L-type Bracket)

230g

Color Temperature Range

3300K~5600K

Model

Changeable Version

(LEDP120C)

Operation

1. Before Usage

● Insert the lithium battery or DC power adapter.

● Switch the power on, the video light giving out light.

2. Light Brightness/Color Temperature Adjustment

Adjusting Light Brightness

● Turn the Select Dial for Light Brightness to adjust the light brightness.

Color Temperature

3300K~5600K

Model

Changeable Version

(LEDP120C)

Light Brightness Range

10%~100%

Adjusting Color Temperature

● Turn the Select Dial for Color Temperature to adjust color temperature.

Color temperature range:

What’s in the Box of LEDP120C?

Included Item

LEDP120C Video Light

L-type Bracket

NO.

LEDP120C(3300K~5600K)

1 PC

LEDP120C Video Light L-type Bracket

* Product design and specifications are subject to change without notice.

Technical Data

Video Light

Power Source

Power

Color Temperature

Brightness(LUX)

Color Rendering Index

TLCI(Qa)

Light Brightness

Range

LED Beads Quantity

Operation Temperature

Dimension

Net Weight

Changeable Version

LEDP120C

7.4V Lithium Battery (NP-F970 model lithium battery)

(sold separately) & 9.0V 1.5A Adapter (sold separately)

Max. 12W

5600K±300K

580 (0.5m/4500K)

630 (0.5m/3300K)

680 (0.5m/5600K)

>95

10%~100%

116

-5°~50°C

175mm*130mm*17mm (not with the L-type Bracket)

230g

Color Temperature Range

3300K~5600K

Model

Changeable Version

(LEDP120C)

LED Video Light

型号: LEDP120C

Instruction Manual | 说明手册

Chinese English Bilingual | 中英文双语

705-L12000-05

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: [email protected]

http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Made In China

Other manuals for LEDP120C

Table of contents

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions