Global Sources ES802 User manual
ES802 Storage Power Supply SPEC
Ⅰ. Product description
Large capacity, overpower output power, built-in large-capacity lithium
battery online type UPS storage power product ES802. This product adopts
high frequency circuit design, which has the advantages of small volume, light
weight and high conversion efficiency. Discard the disadvantages of traditional
UPS power supply, low conversion efficiency and inconvenient movement. It
can be used as an online type UPS power supply and can be used as an outdoor
emergency standby power supply. The product has a built-in lithium battery,
with a total capacity of 1500 ~ 2000wh / 12V 135 ~ 180 Ah. It can provide you
with an endless supply of electricity. This product provides both AC and DC
output. In the case of power failure, and ensure that the computer data is not
lost, the office desktop computer can be continuously powered for more than
15 to 20 hours. The unique 4 USB output ports, the output current as high as
5A, satisfying the charging and power supply requirements of most digital
products.
Unique 4 24V DC output ports, maximum output current as high as 5A.4
24V DC output ports and 2 universal AC outlets can satisfy indoor medical
equipment, small printer, all sorts of lamps and lanterns, small fish tank heater,
notebooks and outdoor camping, photography, fire emergency, disaster relief
and so on occasions the need to provide lighting and the AC power supplies.
This product also has solar power charging port, can connect solar cell to
charge the product. The leading circuit design, the power device all adopt the
original import. Advanced SMT and wave soldering manufacturing process,
computerized monitoring management of process, ensure high reliability and
stability of products.
Ⅱ. Product picture
Ⅲ.Introduction and usage description of panel function
Front panel description
When using the dc output function, please turn on the corresponding DC switch,
and the dc output indicator light will be on, and the DC 24V and 5V output can
be used at this time. When not in use for a long time, please turn off the switch,
so as not to consume electricity. The LED screen displays the remaining power
of the power (0 ~ 100). When using the LED lamp, please turn on the
corresponding switch.
Back panel description
As shown in the figure, when the product is used as a UPS, please
insert the AC input line plug into the home AC socket, and the other one is
inserted into the product's AC input interface. The electrical appliances’ power
cord will be connected to the AC universal socket, which will be supplied by
the AC mains electricity and charged to the internal battery pack. The charging
indicator of the front panel of the charging panel shows red, full of green. The
product can be used as a UPS by turning on the AC output switch of the
product, and at this time the front panel's power indicator is green. When a
sudden power failure, the automatic switch to a product internal battery for
load power. When used as a UPS, please do not exceed the maximum output
power of the machine. The maximum output power of the machine itself is
1500W. If the load power exceeds 1500W, the power supply will go to the
protection state and cannot be exported. Remove the excess load and restart
the power supply. When overpower is used, it can cause the fuse of the
machine to fuse and replace a 10A with normal use.
When taking out outdoor use, please turn off the switches and open them when
needed. Otherwise, the battery will be automatically consumed.
Solar power description: as shown in the solar interface, the solar specification is
36V, 500W~800W is appropriate. When connecting to the solar panel, notice that
the positive negative terminal cannot be connected to the opposite side, and the
positive and negative terminal of the interface should be corresponding to the
anode (left and right negative), otherwise it cannot be charged. When the solar
panel is properly charged, the charging indicator is red and green when filled.
Ⅳ. Product electrical parameters
model
ES802A
ES802B
capacity
12V 180Ah 2000Wh
12V 135Ah 1500Wh
Output power
Rated 1300W，Max 1500W
Rated 1300W，Max 1500W
Input voltage
AC 110V~220V 50/60Hz
AC 110V~220V 50/60Hz
Output
voltage
220V 50Hz / 110V 60Hz
220V 50Hz / 110V 60Hz
DC output
24V/5A 5V/2A
24V/5A 5V/2A
LED light
1W~ 3W
1W ~ 3W
Solar charge
36V 500 ~ 800W
36V 500 ~ 800W
Output eave
type
Pure sine wave
Pure sine wave
Ⅴ. Working principle diagram
In the normal condition of the power grid, the power grid will
supply electricity to equipment while charging the product.
During a sudden power outage, the internal lithium battery automatically
switches the cost of the product to power the equipment.
Response
time
≤5ms
≤5ms
Over load
After overload AC output disconnected,
indicator light bright red, disconnect
load, restart recovery
After overload AC output disconnected,
indicator light bright red, disconnect load,
restart recovery
Short circuit
Ac output disconnected after short
circuit, disconnect load, restart
recovery
Ac output disconnected after short circuit,
disconnect load, restart recovery
Charging time
14 ~ 15 hours
11 ~ 12 hours
weight
16kg
14.5kg
size
42.3*17.5*23cm
42.3*17.5*23cm
color
black
black
Ⅵ.stand-by time
device
ES802A can support times
ES802B can support times
MP 5V
More than 220 times
More than 160 times
LED light 24V
30W 12V LED use about 66
hours
30W 12V LED use about 50
hours
Office desktop
computer
Computer host and display
use about 20 hours
Computer host and display
use about 15 hours
laptop
13" laptop use about 51
hours
13" laptop use about 38
hours
fan
50W fan use about 40 hours
50W fan use about 30 hours
LTV
32" LTV use about 33 hours
32" LTV use about 22 hours
Refrigerator
200W Refrigerator use about
10 hours
200W Refrigerator use about
7 hours
Energy-saving
lamps
60W lamp use about 33
hours
60W lamp use about 25 hours
Power off automatic switch, constant power!
Ⅶ. packing list
Number
Name
Quantity
1
Power device
1
2
AC power cord
1
3
instructions
1
4
warranty card
1
5
certification
1
6
24V 5W LED light（Option）
7
36V ≤ 800W solar panel(Option )
Ⅷ.Precautions
1. This product contains lithium battery, please stay away from the source of
fire, if you do not use please do special treatment, do not arbitrarily discard.
２.Do not use this product in a humid environment or in water, pay attention to
moisture, and use it in a dry and ventilated environment.
3.When using the product, please take it lightly, do not drop, beat or
disassemble by force.
4. When abnormal phenomena such as smoke or fire are found in use, please
stop using the machine immediately and take relevant fire extinguishing
measures to avoid explosion.
5. When using this product, please turn on the product first and then turn on
the corresponding switch.The LED indicator light up to confirm the output, then
use it.
6.When using this product for the first time, please fully discharge the power, r
echarge it ,then use it.
7. When this product is unused, please charge every three months or so to
ensure the battery life
Ⅸ. Product display
Other Global Sources Storage manuals
