Geosense Geologger Linx User manual
Geosense Quick Guide—GeoLogger Link V1.0
4
5. Close the lid and press hard on
the quick-release latch.
4. Replace the lid on the baery
holder and re-t the baery
holder onto the underside of the
lid.
6. The lid is now closed and fully
sealed.
Geosense Ltd
Nova House. Rougham Industrial Estate. Rougham. Bury St Edmunds. IP30 9ND. UK
Tel: +44 (0) 1359 270457. Fax: +44(0) 1358 272860
emal: [email protected]k. www.geosense.co.uk
Geosense Quick Guide—GeoLogger Link V1.0
1
GeoLogger Linx
FOR FURTHER INFORMATION PLEASE REFER TO THE LINX
LOGGER INSTRUCTION MANUAL WHICH IS PART OF THE
LINX SOFTWARE
The GeoLogger Linx is supplied with:
• Set of batteries (AA or C depending on model)
• A USB containing the software for use on a Windows PC
• A small screwdriver
QUICK GUIDE
Geosense Quick Guide—GeoLogger Link V1.0
2
1. To open the lid on the Linx Logger place a small at ended
screwdriver (3-4mm) into the slot on the le hand side of the lid.
2. Push down hard with the screwdriver. This will open the quick-
release latch
Geosense Quick Guide—GeoLogger Link V1.0
3
3. Remove the baery holder, undo the screw securing the lid and
t the baeries
Other manuals for Geologger Linx
1
Other Geosense Data Logger manuals
Geosense
Geosense Geologger Linx User manual
Geosense
Geosense GEOLOGGER G8 PLUS Setup guide
Geosense
Geosense HLC 6000 Series User manual
Geosense
Geosense VW PIEZOMETERS User manual
Geosense
Geosense VWNPC-3000 User manual
Geosense
Geosense Wi-SOS 100 User manual
Geosense
Geosense Geologger GL101A-V User manual
Geosense
Geosense GEOLOGGER G8 PLUS User manual
Geosense
Geosense Laser Tilt90 User manual
