Geo Cosy User manual
Set-up guide
Cosy
2
Important safety notice
jThe following safety regulations must be observed at all times.
Failure to observe precautions could result in severe injury or death.
This product must only be installed by a competent person.
hIt is important to observe some simple safety precautions when installing and using this
product. Read this important information before continuing. Safe operation of the unit is
impaired if not used or installed in a manner specied by the manufacturer.
rIsolate mains supply before removing the switch cover. When connected to a live mains
supply, all internal parts are at mains potential. No user serviceable parts inside.
jFor use in dry, indoor environments only.
nThis product is double insulated.
lAt the end of its life please recycle at a suitable recycling facility. Do not place in general
waste.
sThe display contains a non-replaceable Ni-MH battery pack. It can be removed by
dismantling the unit for recycling purposes only and must be disposed of at a suitable
recycling facility. Do not place in general waste.
mThese units have been tested and conform to all relevant European safety and regulatory
standards where applicable but not limited to the following: EN 60730-2-9:2010 with EN
60730-1:2000 + A1:2004 + A12:2003 + A13:2004 + A14:2005 + A15:2007 + A16:2007 +
A2:2008 (Excluding clauses: H.23, H.26 and Annex ZF); EN 60950-1:2005 (Second edition),
Am 1:2009; EN 300-220-1; EN 301-489-1.
3
Getting started
There are two steps.
•Setting up: powering up and getting to know Cosy
•Installing the switch or switches: this will be completed by the installer or, if you have bought
Cosy without installation being included, you will need to arrange for an electrician to install the
switch/es.
Check contents of the box
Setting up
(set-up guide)
Switch installation
(switch installation instructions)
Arrange for the installer/an electrician to call
Install the switch/es
Switch updates
Download app and view videos
Associate hub (on completion of updates) Installer/electrician tests the system
The system is now in Demo mode The system is now live
Plug in the hub system and display -
updates
customer installer / electrician
4
Setting up
5
Setting up
1. Place the hub beside your broadband
router and connect it up
•Assemble the power adapter, plug it in and
connect it to the hub
•Connect the hub to your broadband router
using the Ethernet cable supplied
•The LED light by the cloud on the right of
the hub will turn green, the one on the left
will turn amber
2. The system will automatically connect
to the internet and download the most
recent rmware
•This can take around 5 minutes during
which the LED lights on the hub will ash
amber
•During this time connect up the display
(step 3)
•Once this is done, both hub LEDs will be
green and the display will show the current
temperature
3. Connect up the display (you can put
this anywhere for now)
•Assemble the power adapter, plug in to
the charging base, plug into the mains and
switch on
•Remove the battery tab from the bottom of
the display unit and place on the charging
base
•The display will show the current
temperature.
4. Whilst the system is updating, on a
web browser:
•Go to www.comehometocosy.com/app,
download the app and register
•Go to www.comehometocosy.com/videos
and view the videos
•Go to www.comehometocosy.com/support
and explore the support pages
5. When the hub LEDs are green
associate the hub with your Cosy
account so that you can use the app
•Open the app and follow the instructions
for associating the hub
6
Demo mode
7
Demo mode
You can now interact with Cosy as though it’s live but you can’t control the heat just yet.
Things you can do before the switch is installed
•Set your temperature settings for each of the lifestyle modes (settings > temperatures). Select
the mode and rotate the dial to the right temperature. On iOS devices you need to tap the dial
rst to set the temperature and again to save it.
•Look at the default proles (settings > schedules > proles > weekday). Try altering and
changing events, look at the weekday prole or add your own prole.
•Select the prole you wish for each day of the week (settings > schedules).
•If you need to, add additional users. They’ll need to download the app and follow the
instructions.
•Take the Cosy display to where you would like to use it most often and see what temperature
it reads.
•Do not position the Cosy display near a heat source (such as a radiator or a light) and avoid
direct sunlight.
8
Installing the Heating switch
9
Installing the Heating switch
The switch is a mains powered thermostat switch. It works in addition to your existing thermostat -
which can stay where it is - so no redecorating required!
The switch can control the heating for up to 2 zones, however you will need to purchase an
additional Cosy Display for each additional zone.
The switch requires a competent electrician to install it and takes 15-45 minutes to install and test.
If you have bought Cosy with installation an installer will contact you and arrange a time and date to
come and install your switch, test the system and make sure you are entirely happy with your Cosy.
If you have bought Cosy without installation you will need to arrange an installation yourself.
Go to www.comehometocosy.com/support where you will be able to download the Heating Switch
Installation Instructions.
When the installer/electrician arrives give them the Cosy Heating switch installation instructions, the
Cosy switch box and show them your heating system.
Once the electrician has installed the switch/es they should test the system to check that your
heating is up and running.
For the system to work properly you need to check three things:
•The switch/es are active (the centre button is green when switched on)
•Your previous thermostat is set to maximum (if you have one)
•Your heating is set to always on
10
Installing the Hot Water switch
Other manuals for Cosy
3
Table of contents
Other Geo Thermostat manuals
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
