Genie WAHDN241A User manual

Quick Start Guide

Please read these instructions carefully before operating the unit

and keep for further reference.

4 Channel 5-in-1 High

Deﬁnition 1080p DVR with

1HDD Bay and Alarms

WAHDN241A

Intro Section

Please read this instruction carefully before operating the product and keep it for further

reference. All examples and pictures used here are for reference only.

The contents of this manual are subject to change without notice.

CAUTION:

• Please check the device and the accessories after getting the device. If there are any

damages, shortages or defects, please contact your dealer immediately.

Contents

iii

1.0 Introduction..........................................................................................................4

1.1 Product Features...........................................................................................4

1.2 Product Dimensions.....................................................................................4

1.3 Speciﬁcation.................................................................................................5

2.0 HDD Installation...................................................................................................6

3.0 Rear Panel Instruction..........................................................................................7

4.0 Start Up and Shut Down......................................................................................8

5.0 Login ....................................................................................................................9

6.0 Conﬁgurations and Connections ........................................................................10

6.1 Ananlogue Camera Connection...................................................................10

6.2 Network Conﬁguration & Adding IP Camera..............................................10

7.0 UPnP .....................................................................................................................12

8.0 NAT.......................................................................................................................13

9.0 Manual Recording and Playback .........................................................................14

9.1 Manual Recording.........................................................................................14

9.2 Playback.......................................................................................................14

The Genie WAHDN241A is a 5-in-1 DVR compatible with AHD, TVI, CVI, CVBS and IP cameras

available in 4 channel formats. It has the ability to connect to analogue and IP

cameras simultaneously and encode the video streams using the H.265 high proﬁle

compression format which gives longer recording times compared to H.264 encoding.

Real-time recording is achievable up to 1080p video with supporting resolution up to 5MP

in AHD, TVI and IP. It is a highly versatile cost effective solution suitable for many CCTV

applications.

1.1 Product Features

• 4CH TVI/AHD/CVI 5MP/4MP 1080p/720p/WD1 video input

• 4CH DVR’s default support 2CH 5MP/4MP/3MP/1080p/960p/720p IP video input

• Standard H.265 high proﬁle compression format to get high-quality video at much

lower bit rate

• Intuitive and user-friendly Graphics User Interface (GUI), Window style operation by

mouse

• Multi-mode recording: Manual/Timer/Motion

• Playback : 4CH simultaneous playback

• Multi-user online simultaneously

• Search: Time Slice, Time, Event (Manual, Motion), Tag Search

• Express and ﬂexible backup via USB, Network and so on

• Pentaplex: Preview, Record, Playback, Backup and Remote Access

• DHCP, DDNS, PPPoE Network Protocol

• Remote control via Web Client or CMS: Preview, Playback, Backup, PTZ and

Conﬁguration

• Support PTZ preset and auto cruise, up to 255 presets and 8 cruises

• Dual stream technology for local storage with high deﬁnition, remote network

transmission and remote surveillance with mobile device

• Authorisation management, log review and device status review

• 1080p output, true high resolution display

• Support NAT function and QR code scanning by mobile phones

• Powerful mobile surveillance by smart phones with iOS and Android OS

• P2P ready for hassle free remote access

• NDAA compliant

1.2 Product Dimensions

1.0 Introduction

300mm

249mm

45mm

Quick Start Guide 4 Channel 5-in-1 High Deﬁnition 1080p DVR with 1HDD Bay and Alarms

1.3 Speciﬁcation

Model WAHD241A

System OS Embedded Linux

Video

Analogue Video Input BNC x4

BNC interface (1.0Vp-p, 75)

IP Video Input 2CH (Up to 6CH)

Up to 5MP @ 25fps/4MP @ 30fps

Total Input 6CH

Output

HDMI x1 : 1920×1080 / 1280×1024 / 1024×768

VGA x1 : 1920×1080 / 1280×1024 / 1024×768

BNC x1 : CVBS (Used as the main or spot output)

Compression H.264 / H.265

Audio

Input RCA x4

Output RCA x1 (Linear, 600)

Two-Way Audio Take up channel one audio input

Compression G.711(U/A)

Record

Resolution 5MP Lite / 4MP Lite / 1080p / 1080p Lite / 720p / WD1 / D1

Frame Rate

Analogue Channel: 5MP Lite @ 10fps (PAL / NTSC),

4MP Lite / 1080P @ 12fps (PAL) / 15fps (NTSC),

1080P Lite / 720P / WD1 / D1 @ 25fps (PAL) / 30fps (NTSC)

IP Channel: 25fps (PAL) / 30fps (NTSC)

Bit Rate 32Kbps ~ 4Mbps

Mode Manual, Timer, Motion, Smart Event

Mobile Device OS iOS, Android

Storage HDD SATA x1, Up to 8TB HDD

Playback

Playback 4CH

Search Time Slice / Time / Event / Tag Search

Smart Search Highlight colours to display the camera record in a certain period of time, different

colours refer to different record events

Function Play, Pause, FF, FB, Digital Zoom, etc.

Alarm

Mode Manual, Motion, Exception, Smart Event

Input 4CH

Output 1CH

Network

Interface RJ45 1000Mbps x 1

Protocol TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, HTTP, HTTPs, NTP, SMTP

Incoming Bandwidth 16Mbps (Max. 36Mbps)

Outgoing Bandwidth 40Mbps

Remote

Monitoring

Immix Compatible with Immix via RTSP only (2-way audio not supported)

Sentinel Yes, Firmware 1.1.0 or later

Backup Local Backup U disk, USB mobile HDD

Network Backup Yes

Port

RS485 Yes (Half-duplex), Connect to PTZ or Keyboard

USB USB 2.0 × 2

Remote Controller Optional

Others

Power Supply DC12V / 2A

Consumption ≤10W (Without HDD)

Working Environment -10~50°C, 10%~90% (Humidity)

Dimensions 300 × 249 × 45 mm

This product supports 1 SATA hard drive. Please make sure that the device is powered off

before the installation. The pictures of the installation are for reference only.

1. Loosen the screws to open the cover.

2. Screw the screws into the HDD but do not tighten them.

3. Place the HDD onto the bottom of the machine.

4. Turn over the machine and secure the HDD with the screws.

5. Connect the power and data cables.

6. Install back the cover and secure it with the screws.

Note: Please check the inside structure of the device and make sure that the cables are

connected well before installing the cover back. Please format the HDD before using.

2.0 HDD Installation

The interfaces of the rear panel are for reference only.

Rear panel for WAHD241A

Rear Panel for WAHD281A

3.0 Rear Panel Instruction

Internet

CVBS

DC12V

USB

e SATA

LAN

VGA

AUDIO IN

48 VIDEO IN

AUDIO OUT

RS485

GND

COM2

COM1

NO2

NO1

531

ALARM OUT

ALARM IN

Name Description

ALARM OUT Relay output, connect to external alarm

ALARM IN Alarm input for connecting sensors

GND Ground

AUDIO IN Audio input

VIDEO IN Video input

CVBS CVBS output

AUDIO OUT Audio output

HDMI Connect to high deﬁnition display device

VGA Connect to monitor

LAN Ethernet connector

USB Connector for USB devices

e-SATA Connector for e-SATA

RS485 Connector for RS485 devices. A is TX+,B is TX

DC12V Power input

Startup

1. Connect the monitor and the power.

2. The device will boot and the power indicator will display blue.

3. A wizard window will pop up.

Shutdown

Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The

device will shut down by clicking “OK” button. Then disconnect the power.

4.0 Start Up and Shut Down

The default username is admin and the default password is 123456. You must conﬁgure the

wizard if you start the DVR for the ﬁrst time and you may change the password when you

conﬁgure the wizard for the ﬁrst time. You can skip the settings wizard next time.

Click “Start” and select “Login”. This will take you to see a login box. Enter the default

username and password you set. Then you will see the live image.

5.0 Login

6.1 Ananlogue Camera Connection

First connect the camera to the DVR.

Then go to Start → Settings → Camera→ Manage Camera → Camera Signal to checkmark the

video mode. Theactual signals input shall correspond to the video mode. Please refer to

the User Manual for details.

6.2 Network Conﬁguration & Adding IP Camera

After you ﬁnish adding IP cameras, you can see the live images through the monitor of the

DVR. The following will mainly introduce how to add the IP cameras via LAN/WAN.

LAN

1. Set the network of the DVR. Go to Start → Settings → Network → TCP/IP. Enter IP

address, subnet mask, gateway, etc. If using DHCP, please enable DHCP in both the

DVR and the router.

2. Go to Start → Settings → Network → Port. Enter HTTP port (the default value is 80),

server port (the default port is 6036).

3. Click “Apply” to save the settings.

4. Go to Start → Settings → Camera → Add Camera. The DVR will automatically refresh the

cameras searched. The IPC which supports the Onvif protocol may be added manually.

If the IPC searched is not in the same local network as the DVR, you should select the

device and click to modify the IP address.

6.0 Conﬁgurations and Connections

Table of contents

Popular DVR manuals by other brands

FLIR

FLIR M3100E Series instruction manual

VTRACKPRO

VTRACKPRO FPRO300 user manual

Swann

Swann NVR-7085 models instruction manual

XtendLan

XtendLan DVR-1670C user manual

urmet domus

urmet domus 1093/004AHD instructions

Holux

Holux M1 user manual

CMOS DOTCOM

CMOS DOTCOM ANX-1670 manual

Whistler

Whistler D16VRS user guide

Defender Security

Defender Security 82-20235 user manual

MISUMI

MISUMI MP-WF100M user guide

Speco

Speco D8HU user guide

UST

UST DDR-E04AA Hardware user manual

Consolidated

Consolidated Digital Video Recorder user manual

Mace

Mace DVR0404RW Operational manual

RCA

RCA RTD315W user manual

FSM

FSM Colibri Grande PRO user manual

Hauppauge

Hauppauge HD PVR 2 Quick install guide

Identivision

Identivision ICR-PH161i PIONEER user manual