Geemarc AmpliPHOTO50 User manual
AmpliPHOTO50TM
EASY-DIAL PHONE WITH VOLUME CONTROL
TELEPHONE MULTIFONCTIONS A GRANDES TOUCHES
TELEFONO MULTIFUNCTIONES CON TECLA GRANDES
English
Français
Español
Warning :This telephone product is specifically designed for people
withhearingdifficultiesandisprovidedwithahandsetearpiecevolume
controlforindividualrequirements.Duecaremustbetakenbyallusers
that the handset earpiece volume control is set to the lowest level
acceptablebyeachrespective user. Careshouldtherefore beexercised
to ensure that any new users are familiar with this requirement.
Attention : Ce téléphone peut être destiné aux personnes ayant des
problèmes d'audition. Il possède un écouteur à volume variable. A la
premièreutilisation, assurez-vous que le bouton deréglage duvolume
soit positionné sur la position volume minimum. Les personnes
malentendantes pourront par la suite augmenter le volume pour
l'adapter a leur audition.
Precaucion : Este producto telefónico ha sido especificamente
diseñadoparapersonascondificultadesdeaudición,y lleva un control
de volumen a la altura del auricular para adaptarlo a las necesidades
indiduales. Habrá que tener un cuidado especial de ajustar el control
de volumen al nivel mínimo aceptable porc ada usuario respectivo.
Deberá asegurarse de que todos los nuevos usuarios se familiarizan
con este requisoto.
Index
Description 4
Installation
- Connections 5
- Wall mounting 5
Setting up
- Ringer settings 6
Using the phone
- Answering incoming call 7
- Making a call 7
- Last number redial 7
- Flash key 8
- Receiver volume controle 8
Memory feature
- Storing telephone numbers 9
- Dialling stored number 10
Inserting pictures 11
Regulatory Compliance 12
Guarantee 14
4
Description
1. Receiver
2. Transmitter
3. Hook Switch
4. Memory Index Card
5. M1 Button
6. «Normal» / «One touch» switch
7. Ringer (Off/Lo/Hi) Switch
8. Ringer Indicator
9. 911 Button
10.Store Button
11. Key Button (1~9;*;0;#)
12. Redial Button
13. Photocall Button
14. Receiving Volume Control Handset
15. Flash Button
5
Installation
Handset Cord Connection
Insert the coil cord into modular jack located on the left side of the
base. Connect the other end into the modular jack located on the
handset.
Line Cord Connection
Insert the modular plug of the straight cord into the rear side of base
unit, then insert the other end of RJ11C into the telephone wall
socket (*).
(*) Classified TNV-3 according to EN60950 standard.
Wall mounting
Your phone is also designed to be mounted on a wall.
Make 2 holes in the wall , insert the wall plugs and the wall mounting
screws.
The screws should protrude from wall by 6-7 mm.
Place the phone onto the screw-heads and slide down to secure.
Wall mounting
6
Settingup
Ringer setting
Ringer OFF / LO / HI
Your phone provides a ringer adjustment of High, Low or Off. The
switch is located at the rear side of the telephone.
When you don‘t want to be disturbed, slide the switch to the OFF posi-
tion. Only the red lamp will flash.
Otherwise adjust to HI or LO position.
7
UsingthePhone
Answering incoming call
- When an incoming call is received the phone will ring . To answer
the call lift the handset and speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line.
Making a call
- Lift the handset.
-Await the dial tone and dial required number.
- On completion of the call, carefully replace the handset in the
cradle.
Last Number Redial
Your telephone remembers the last number dialed. If the number you
dial is busy or not being answered, hang up.
To redial the last number automatically, lift the handset then press the
REDIAL button.
NOTE: You can redial the same telephone number as many times as
required.However, once you dial another number,thepreviousnumber
is erased.
8
Usingthephone
Flash
TheFLASH buttoncan be used to retrieve anew dialtone afterending
a call.
The FLASH button is also a useful feature for special telephone servi-
ces such as call waiting and three party calling.
Press briefly, release and perform the custom call procedure.
NOTE : Call waiting is a service of your local telephone company.
Receiver Volume Control
On the front edge of your telephone you will find a slide volume
control. This control may be used to adjust the volume of received
speech.
With the control set towards the right hand side of the phone, the
received volume will be at its maximum.
With the control set to the left side, it will be at its minimum.
9
MemoryFeature
STORING TELEPHONE NUMBERS
M1 and 911 keys
Your phone can store 2 direct memories (one touch) through M1 &
911 keys (like for emergency numbers ).
Others memories
10 memories can be used for programming your most frequently
dialed telephone numbers. You can store up to 16 digits in the
priority key button or in each of the numeric key button (0 through 9),
by following the steps outlined below:
1. Slide the «normal» / «one touch» switch to NORM position.
2. Lift the handset (releasing hook switch).
3. Press STORE button.
4. Dial the number.
5. Press STORE button.
6.Press the priority key M1 or (0-9) (pictures) you want that
telephone number stored in.
7. Your number is now stored.
8. To change a stored number, repeat the same process. The new
number will store over the old stored number.
NOTE : A Memory Index Card is provided for your use in writing
down the persons name.
10
MemoryFeature
DIALING STORED NUMBER
Numbers stored in “one touch” memory keys
- Lift the handset and await the dial tone.
- Press appropriate button M1 or 911.
The stored number will be dialed automatically.
Numbers stored in key button memories
- Lift the handset and await the dial tone.
- Press PHOTOCALL button.
- Press appropriate button 0 to 9.
The stored number will be dialed automatically.
These stored numbers can also be dialed in “one touch” mode
when the keys are equipped with pictures (photos):
- Move the «normal» / «one touch» switch to ONE TOUCH.
- Lift the handset and await the dial tone.
- Press one of the picture buttons.
- The stored number will be dialed automatically.
IMPORTANT : IN ALL THE CASES THE MEMORIES M1 AND 911
WILL BE AVAILABLE IN “ONE TOUCH” MODE.
Table of contents
Languages:
Other Geemarc Telephone manuals
Geemarc
Geemarc 250 User manual
Geemarc
Geemarc Jupiter 20 User manual
Geemarc
Geemarc RP7510 User manual
Geemarc
Geemarc PHOTOPHONE 450 User manual
Geemarc
Geemarc ClearSound Amplidect COMBI355 User manual
Geemarc
Geemarc DALLAS20 User manual
Geemarc
Geemarc APOLLO 10 User manual
Geemarc
Geemarc CL610 User manual
Geemarc
Geemarc CL1100 User manual
Geemarc
Geemarc Jupiter 4 User manual
Geemarc
Geemarc CL50 User manual
Geemarc
Geemarc CL320 User manual
Geemarc
Geemarc PhotoTEL User manual
Geemarc
Geemarc SCREENPHONE User manual
Geemarc
Geemarc MAYFAIR User manual
Geemarc
Geemarc MARBELLA User manual
Geemarc
Geemarc CL10 User manual
Geemarc
Geemarc CL100 User manual
Geemarc
Geemarc AmpliPOWER 40 User manual
Geemarc
Geemarc Ampli500 User manual
