Geemarc CL1100 User manual

CL1100

Amplified Desk Telephone

With Volume And Tone Control

English

!!! Please refer to our website: www.geemarc.com for an up to

date user guide, as there may be important updates and changes

you need to be aware of !!!

INDEX.....................................................................1

DESCRIPTION........................................................2

SETTING UP...........................................................4

- Connecting the telephone.....................................4

- Ringer settings......................................................4

- Dialling types and grounding (UK version)...........5

- Time break recall switch.......................................6

VOLUME AND TONE ADJUSTMENT...................7

- Receiving volume and tone ..................................7

- Sending volume level adjustment.........................8

USING THE PHONE...............................................9

- Answering incoming call.......................................9

- Making a call.........................................................9

- Last number redial................................................9

- Recall, * & # buttons .............................................9

- Mute button.........................................................10

- Storing telephone numbers.................................10

- Dialling stored number........................................11

SAFETY INFORMATION .....................................12

GUARANTEE .......................................................13

RECYCLING DIRECTIVES..................................14

INDEX

DESCRIPTION

Direct memory

buttons Flashing incoming

ring indicator Phonebook

insert card

Tone reception

adjustment

Volume reception

adjustment

Extra volume and

tone activation

Memory storing

key

Time break

recall button

Mute button

Last number

redial

DESCRIPTION

Sending

level switch

Line cord socket*

Tone / Pulse / Grounding

switch Time break recall switch

(R=100ms/300ms)

Volume & Tone adjustment

ON/OFF switch

Ringer level

adjustment switch

Reception volume

adjustment Reception Tone

adjustment

1 - CONNECTING THE TELEPHONE

1. Connect the handset cord.

2. Open the battery compartment by pulling back

the latch.

3. Insert correctly 4 x AAA 1.5V alkaline batteries

(not supplied) in the battery compartment (*).

Batteries are required if you wish to increase

the ringer level up to 10 dB.

4. Snap the battery door back in place.

5. Connect the line cord to the socket (*).

(*) Classified TNV-3 according to EN60950 standard.

2 - RINGER SETTINGS

A switch located on the upper side allows the

ringer to be switched HI, LOW, OFF :

: Off,

: Low,

: Hi

Your phone comes with the ringer switched to

«High» and the melody set to «6»:

Low Mid High

Melody 1 1 2 3

Melody 2 4 5 6 (by default)

Melody 3 7 8 9

SETTING UPSETTING UP

If you don’t like the ringer melody, you can

choose a new one by changing the settings as

per instructions below:

- Lift the handset.

- Press button.

- Press # button.

- Press any of the 1 - 9 dial keys.

The new ringer settings will be activated with the

next incoming call.

Note: The ringer level will be increased up to 10

dB if you insert batteries into the battery

compartment.

3 - DIALLING TYPES AND GROUNDING

A switch ETR/PR/T located on the upper side is

equipped on some models. If you wish to connect

your CL1100 to a public UK/French switch-board

(PBX), move switch ETR/PR/T to position 3 (T).

This will ensure optimal compatibility of your

phone with most (99%) PBX.

SETTING UP

Positions:

Position 1:

Pulse dialling. The Ris grounded. This option

can be used only within the UK in very special

cases.

Position 2:

Pulse dialling. The R is set according to the

determined adjustment (see «Time Break Recall

Setting for R Function» p.9).

Position 3:

Tone dialling. The R is set according to the

determined adjustment (see «Time Break Recall

Setting for R Function» p.9).

If you are using your CL1100 with a hearing aid, set

your hearing aid to “T” position.

4 -TIME BREAK RECALL SWITCH (300/100)

Check the Time Break Recall setting of your

CL1100. For the UK the Time Break Recall

should be set to 100 mS. It can be switched to

300 mS for other locations or PBX’s.

SETTING UP

1 - RECEIVING VOLUME AND TONE

ADJUSTMENT

You can adjust the receiving volume and tone

according to your own hearing requirements.

The button allows extra volume and tone

functions to be activated or deactivated during

the conversation.

Tone and volume adjustment (15dB to 30dB) is

only activated when the switch located at the

upper side of your phone is set to ON. When this

button is set to OFF only the volume can be

adjusted from 0dB to 15dB.

When the function is activated, the red light of

extra receiving and tone function button is

lit.

Note: When the tone (treble), earpiece volume

and sending levels are set to the maximum,

whistling may occur. If whistling occurs the

sending level settings should be decreased with

the switch .

TONE AND VOLUME ADJUSTMENT

Adjust the TONE and VOLUME buttons to fit the

levels to your own hearing requirements.

2 - SENDING VOLUME LEVEL ADJUSTMENT

If your voice is quiet or called parties have

difficulty hearing you, you can increase the

sending level volume with the switch located on

the upper side. You can also decrease the

sending volume if required.

TONE AND VOLUME ADJUSTMENT

1 - ANSWERING INCOMING CALLS

- When an incoming call is received the phone

will ring and the incoming call indicator will

flash. To answer the call lift the handset and

speak.

- On completion of the call, carefully replace the

handset in the cradle to release the line.

2 - MAKING A CALL

- Lift the handset.

- Await the dial tone and dial required number.

- On completion of the call, carefully replace the

handset in the cradle.

3 - LAST NUMBER REDIAL

- Lift the handset.

- Await the dial tone and press button.

- A previously dialled number will be

automatically redialled (not in use for memory

numbers).

4 - RECALL, * & # BUTTONS

These are used with the new services provided

on digital exchanges. For details please contact

your network operator.

USING THE PHONE

Other manuals for CL1100

Table of contents

Other Geemarc Telephone manuals

Geemarc

Geemarc AMPLIDECT 280 User manual

Geemarc

Geemarc CL1100 User manual

Geemarc

Geemarc CL595 User manual

Geemarc

Geemarc DALLAS10 User manual

Geemarc

Geemarc AMPLIDECT 280 User manual

Geemarc

Geemarc Marbella User manual

Geemarc

Geemarc Dialatron User manual

Geemarc

Geemarc CL100 User manual

Geemarc

Geemarc Jupiter 20 User manual

Geemarc

Geemarc SCREENPHONE User manual

Geemarc

Geemarc CL1400 User manual

Geemarc

Geemarc CL1200 User manual

Geemarc

Geemarc Petite Trac User manual

Geemarc

Geemarc CL9000 User manual

Geemarc

Geemarc CL8350 User manual

Geemarc

Geemarc CL8350 Mounting instructions

Geemarc

Geemarc Serenities User manual

Geemarc

Geemarc PhotoPhone User manual

Geemarc

Geemarc CL1100 User manual

Geemarc

Geemarc PARK LANE User manual

Geemarc

Geemarc RP7510 User manual

Geemarc

Geemarc Jupiter 50 User manual

Geemarc

Geemarc CL200+ User manual

Geemarc

Geemarc SOLAR4 User manual

Popular Telephone manuals by other brands

GE 2-9480 user guide

D-Link

D-Link DWR-720/PW user manual

Interquartz

Interquartz Gemini IQ333 operating instructions

SSS Siedle

SSS Siedle HT 840-0 operating instructions

Motorola

Motorola TITANIUM manual

Panasonic

Panasonic ICX Quick reference guide

LG H870DS user guide

Samsung

Samsung GT-I9500 Service manual

AT&T

AT&T Trimline 205 user manual

Selta

Selta zenyth 600 user guide

Doro

Doro AFTI 20 user guide

UNIQCELL

UNIQCELL A1 user guide

Panasonic

Panasonic KX Series User Sheet

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone manual

BT Decor 425 user guide

NEC

NEC SV8500 Reference sheet

Teledex

Teledex PEARL user guide

Ericsson

Ericsson Dialog 3213 user guide