Geemarc CL7700 OPTI User manual

1
En 2 - 31
Fr 32 - 60
Ge 61 - 89

2
INTRODUCTION ����������������������������������������������������������������������������������������������3
Unpacking the CL7700 OPTI ������������������������������������������������������������������������4
Receiver(Headset) description ���������������������������������������������������������������������5
Transmitter (Charger Stand) description����������������������������������������������������6
Transmitter Back Panel ����������������������������������������������������������������������������������6
Voice Notication ����������������������������������������������������������������������������������������������7
Getting Started – Connecting the Charger Stand to your Television
(or an Other Audio Device) ����������������������������������������������������������������������������8
INSTALLATION�������������������������������������������������������������������������������������������������8
A. Φ3.5mm audio socket ����������������������������������������������������������������������������� 10
B� Optical socket�������������������������������������������������������������������������������������������� 10
USING THE CL7700 OPTI ������������������������������������������������������������������������� 12
Charging your CL7700 OPTI���������������������������������������������������������������������� 12
Turning on the CL7700 OPTI ��������������������������������������������������������������������� 13
SETTINGS������������������������������������������������������������������������������������������������������� 15
Volume Setting ����������������������������������������������������������������������������������������������� 15
Balance Setting ���������������������������������������������������������������������������������������������� 15
Tone Setting����������������������������������������������������������������������������������������������������� 17
Stereo/Mono Setting ������������������������������������������������������������������������������������� 18
PAIRING����������������������������������������������������������������������������������������������������������� 19
Phone Call pairing ����������������������������������������������������������������������������������������� 19
ECO MODE����������������������������������������������������������������������������������������������������� 24
CL7700 OPTI with Hi-Fi or MP3 Player �������������������������������������������������� 25
TROUBLESHOOTING��������������������������������������������������������������������������������� 25
GENERAL INFORMATIONS ��������������������������������������������������������������������� 26
Cleaning ����������������������������������������������������������������������������������������������������������� 26
Environmental������������������������������������������������������������������������������������������������� 26
Battery Warnings�������������������������������������������������������������������������������������������� 27
Features ����������������������������������������������������������������������������������������������������������� 28
TECHNICAL SPECIFICATIONS��������������������������������������������������������������� 28
Electrical Specication of the Charger Stand���������������������������������������� 29
GUARANTEE ������������������������������������������������������������������������������������������������� 30
RECYCLING DIRECTIVES������������������������������������������������������������������������ 31

3
INTRODUCTION
Thank you for having purchased the Geemarc CL7700 OPTI – our
Amplied 2.4GHz wireless TV headset. The CL7700 OPTI is a
stylish, top quality headset delivered with its Charger Stand, which
can be connected to televisions, laptops, music players, and iPods�
The headset provides high quality CD sound, and can be used alone
as a Bluetooth headset, without the need of having its Charger
Stand nearby�
The CL7700 OPTI is useful in situations where members of the
same household do not wish to watch the same TV program
together� By wearing our headset, one can watch TV without
disturbing those around, who might prefer to read.
The headset has tone, volume, and balance controls, and you can
choose to have either stereo or mono sound� It also has a built-in
rechargeable battery which self-charges when the headset is placed
on its Charger Stand�
This easy-to-use, stylish device will allow you to hear the beauty of
sound with amazing quality and clarity.
You can pair your TV headset at your mobile phone in Bluetooth
mode and answer at one call or even listen the music by one
application�
It is important that you read the following instructions if you wish to
enjoy the full potential of your Geemarc CL7700 OPTI. Keep this
user guide in a safe place for future reference.

4
Unpacking the CL7700 OPTI
When unpacking our CL7700 OPTI, you should nd the
following ítems in the box:
• 1x CL7700 OPTI Bluetooth controlled headset
• 1x Transmitter (Charger Stand)
• 1x AC power adapter 1,5 meter
• 1x Optical cable 1 meter
• 1x 3.5 mm male Jack to 3.5 mm male Jack cable
• 2x Pairs of ear pad gel (small size & large size)
• 1x User guide
For product support and help visit our website at
www�geemarc�com
E-mail : help@geemarc�com
Telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760
Grande-Synthe,France�
Made for Geemarc Telecom
S�A� in China
INTRODUCTION

5
Receiver(Headset) description
1. Receiver Buttons :
ON/OFF Power ON and OFF the device
TONE For entering “Tone Adjust Status”
BALANCE For entering “Balance Adjust Status”
RIGHT/UP For adjusting setting
LEFT/DOWN For adjusting setting
CALL For answer phone and Bluetooth pairing
switch back and forth between two devices.
2. Receiver LEDs :
There are 9 LEDs� These LEDs will be used to indicate the
status in dierent status.
DescriptionButton
INTRODUCTION
LED x9
Left / Down
Right / Up
Call
Tone
Balance
On / O

6
Transmitter (Charger Stand) description
Transmitter Back Panel
Description
Button
Switch Status Description
Description
Ports
Pairing Button Pairing button on Charger Stand
Power
Switch
Power
Switch
Power
Switch
OFF
ON
MONO
The Charger Stand is powered OFF�
The Charger Stand is powered ON, and it will
make the CL7700 OPTI works in Stereo mode�
The Charger Stand is powered ON, and it will
make the CL7700 OPTI works in Mono mode�
USB Type-C 5V Power Input port�
3.5 mm Line-In For 3.5mm Line-In audio source.
Optical
(SPDIF)
For Optical In audio source. (Remark :
When 3.5mm Line-In is plugged in, optical
input is ignored )
INTRODUCTION
Button
Pair
Line-InOptical
Power
Switch
USB
Type-C

7
Voice Notication
The Headset should have a set of voice notications to indicate
the status of the Headset. The following voice notications are
supported :
1� “Power ON” - when the Headset is power ON�
2� “Power OFF” - when the Headset is power OFF�
3. “Pairing” - when the Headset enters Pairing Status.
4� “Connected”- when the Headset is connected to a
device�
5� “Disconnected” - when the connection has
disconnected�
6� A “Beep” sound - when
a. volume hits the maximum or minimum level.
b. balancing hits, the left or right most.
c� tone hits Tone 1 or Tone 5�
7� A “Beep Beep” sound - when
a� the volume level reaches Level 5� (middle
position)
b. the balance level reaches at the middle (left and
right balance)�
c. the tone channel at Tone 3 (middle tone).
d. lost the signal of the connected device,
searching the signal of the device and trying to
reconnect�
8� “Low Battery” - when the Battery voltage is low�
9� Incoming sound – when a new incoming call occurs�
INTRODUCTION

8
Getting Started – Connecting the Charger Stand
to your Television (or an Other Audio Device)
1. Insert the USB Type-C connector of the AC power
adapter into the “DC IN 5V” socket at the back of the
Charger Stand�
INSTALLATION
Line-InOptical
Power
Switch
USB
Type-C
Button
Pair

9
2. Insert either one end of the 3.5 mm Jack cable into the
“AUDIO IN” socket at the back of the Charger Stand, or one end
of the optical cable into the “OPTICAL” socket at the back of the
Charger Stand�
3. Insert the other end of the cable you have chosen, that is either
the male Jack cable or the optical cable, into your audio source’s
output socket, that is the output socket of the device you are
using the headset with�
There are dierent methods you can follow to set up the Charger
Stand depending on what sockets your audio device is equipped
with. Please see below:
INSTALLATION

10
A. Φ3.5mm audio socket
Insert one end of the 3.5 mm Jack cable into the “AUDIO IN”
socket at the back of the Charger Stand. Insert the other end of
this cable into the 3.5mm audio output of your television (or of
any other audio device)�
Note: if you connect the Jack audio 3.5mm at the headset output
of your TV, it risks that the Sound of the TV speaker is cut.
B� Optical socket
Insert one end of the optical cable into the “OPTICAL” socket
at the back of the Charger Stand. Insert the other end of this
cable into the “OPTICAL OUT” or SPDIF output socket of your
television (or of any other audio device).
INSTALLATION
Table of contents
Languages:
Other Geemarc Headset manuals

Geemarc
Geemarc CL7400 User manual

Geemarc
Geemarc CLA3 User manual

Geemarc
Geemarc CL7350 User manual

Geemarc
Geemarc CL7350 Instruction manual

Geemarc
Geemarc CL7400BT User manual

Geemarc
Geemarc CL7400 User manual

Geemarc
Geemarc CL7370 User manual

Geemarc
Geemarc CL7400 User manual

Geemarc
Geemarc LoopHEAR 20 User manual

Geemarc
Geemarc CL7350 Instruction manual





















