GE HO97958 User manual
USB 1.1 Hub
HO97958
INS
INSTRUCTION
TRUCTION
MANU
MANUAL
AL
www.jascoproducts.com
97958IN 8/19/03 8:09 AM Page 1
User’s Manual
USB HUB
Please read this manual thoroughly and follow the
instruction procedures to prevent any damage to the
USB HUB and/or the connecting devices.
THIS PACKAGE INCLUDES:
• USB 1.1 Hub
• User’s Manual
1
97958IN 8/19/03 8:09 AM Page 2
Overview
This USB 1.1 Hub lets you add up to four additional
USB devices to a single USB port on your computer.
This device complies with USB 1.1 specifications and
supports data speeds up to 12Mbps. It is compatible
with all USB devices.You can connect multiple hubs
together to support up to 127 devices through a
single USB port on your computer.
FEATURES
• USB 1.1 specification compatibility.
• Plug and play with USB devices.
• Bus fault detection and recovery.
• All Downstream Ports support full-speed (12 mbps)
and low-speed (1.5 mbps) operations.
• 1 LED to indicate power.
• Per port overcurrent detection and protection.
2
97958IN 8/19/03 8:09 AM Page 3
Technical Specifications
USB Hub: 4 Port
Standards: USB 1.1 Specification Compatibility
Operating Systems: Windows® 98, 98SE, ME, 2000, XP
or MAC® OS 8.6 & above
Data Speed: Low: 1.5Mbps, High: 12Mbps
Upstream Ports: Series A plug x 1
Downstream Ports: Series A receptacle port x 4
Per-Port Current: Self-Power 500mA, Bus-Power 100mA
Dimension (LxWxH): 90mm x 37mm x 10mm
OperationTemperature: 0ºC ~ 40ºC
Humidity: 5-90% RH non-condensing
3
97958IN 8/19/03 8:09 AM Page 4
Power Consumption
This USB Hub provides all four downstream ports with a total of 500mA. This
should be adequate for most mice, keyboards, and other low power devices.
Hardware Installation
1. Connect the series “A” connector (see Diagram A, Fig. 1, pg. 6) of the built-in
uplink cable into one of the downstream ports on your computer or another
hub.
2. Connect the series “A” connector of USB Device, such as a USB mouse, a
USB keyboard, and so on into any one of the downstream ports on the
USB Hub. (see Diagram B).
3. If your computer indicates the devices are not receiving sufficient power; or
if devices are not powering up, you may need to order an AC Power Supply
(see ordering instructions at the end of troubleshooting section).
4
97958IN 8/19/03 8:09 AM Page 5
Diagram A
5
97958IN 8/19/03 8:09 AM Page 6
Diagram B
CAMERA
USB DEVICES:
MOUSE
PRINTER
SCANNER
COMPUTER
WITH USB PORT
6
97958IN 8/19/03 8:09 AM Page 7
Diagram C
Downstream
Ports
Upstream
Port
Power
Jack
7
97958IN 8/19/03 8:09 AM Page 8
Driver Installation
NOTE: Driver installation is only required for Windows® 98 and 98SE.
Windows® ME, 2000, XP as well as Mac® OS users can skip this
section.
WINDOWS® 98 and 98SE
Once you connect the USB Hub to your
computer, the computer will automati-
cally detect the hub and run the “Add
New HardwareWizard”.
Complete the following steps:
1. When the initial screen introducing
the New Hardware Wizard appears,
press “next”.
2. On the second screen, please
select “Search for the best driver for
your device (Recommended)” and
press “next”.
8
97958IN 8/19/03 8:09 AM Page 9
Driver Installation
3. On the third screen requesting
you to select locations to search for
drivers, please do not change the
default selections. Simply press
“next”.
4. On the fourth screen indicating
the location the driver will be
installed on your hard drive, please
press “next”.
5. On the final screen notifying you
that the driver has been installed,
simply press “finish”.
9
97958IN 8/19/03 8:09 AM Page 10
Table of contents
Languages:
Other GE Switch manuals
GE
GE POWER/VAC 4.16 User manual
GE
GE DS-242-POE Assembly instructions
GE
GE Multinet 4 User manual
GE
GE GLX+Q 1 1COM 16A 2M AST IR User manual
GE
GE 28169 User manual
GE
GE MultiLink User manual
GE
GE Motion Sensing Diecast Metal Lantern None User manual
GE
GE ABB ReliaGear LV SG User manual
GE
GE C-Start User manual
GE
GE CSWONBLPWF1 User manual
