Garett SARA User manual
User manual
MULTILANGUAGE
www.garett.eu
SmartWatch
Garett Women
SARA
MULTILANGUAGE
Český 21
English 3
Nederlands 48
Slovenčina 66
Magyar 39
Українська 75
INFO (EN/PL) 84
Lietuvos 30
Polski 12
Română 57
English
IMPORTANT! The band is not a medical device. The Garett Women Sara
model and the WearHealth application are not intended for medical diagnosis,
treatment or as a preventive measure against disease or illness. Before
changing your sleep habits and physical activity, first consult your doctor.
PRODUCT DESCRIPTION
INSTALLATION
Put on the wristband and adjust the length of the bracelet so that the strap of
the device is not loose.
2. Touch button for switching on / off / entering the menu / changing functions
3. Sensor set
1. Screen
4. Metal bracelet
OPERATION
Turn on / off
Press and hold the touch on / off button (2) to turn the device on. When you
want to turn off the device, go to the menu to disable the band and hold down
the touch button (2).
Note: Before first use, make sure that the band is connected to the
application. The device will automatically synchronize the time and the
physical activity data will be saved correctly.
CHARGING
1. The band is charged using the charging handle attached to the device.
2. Insert the device into the holder so that its contacts on the back side contact
the contacts of the charging holder. Then connect the other end of the cable to
the USB port of your computer or USB power adapter.
Note: The device should be stable when charging on a flat surface and
the magnetic tip should adhere to the contacts. The first charging
should last approx. 1 hour.
BEFORE FIRST USE
The application can be searched by entering the name "WearHealth" in the
store search engine or by scanning the corresponding QR code shown below.
The band works with your smartphone using the WearHealth app. Before
using, download this application from the Google Play Store or AppStore and
install it on your phone..
iOS Android
PAIRING
Note: The Garett Women Sara does not require a permanent connection with
the smartphone, but to fully use the functions of the device, it should be paired
with the smartphone using the application. When you launch the application
for the first time, we will be asked to create an account, thanks to which we will
have access to our data on other devices. Before using the band for the first
time, user data must be entered in the application.
Note: Each time the watch and the application are turned on, the data is
synchronized automatically (devices must be paired!).
The device in standby mode measures and analyzes data on physical activity
and sleep. The Garett Woman Sara is equipped with an accelerometer (G-
sensor), which monitors the user's body movements and processes them
based on algorithms that allow to determine the details of sleep and physical
activity.
2. Make sure the band is on.
5. During pairing, place the band near the phone with which it will be
connected.
6. After successful pairing, the hour on the band will update.
3. Open the WearHealth app.
After pairing the band with the phone, enter user data ("User> User data" tab:
gender, date of birth, weight, height, correct pressure, skin colour, it is also
Note: The Garett Woman Sara works with smartphones that support
Bluetooth 4.0. It is also compatible with Android 4.4, iOS8 (and higher).
1.Turn on Bluetooth connectivity on your phone.
4.Go to the "User" tab at the bottom of the screen, then select the "Connect to
watch" option, and then select the device named "H8".
3. Heart: Heart rate monitor.
11. Shutdown: turn off the band. To turn off the band, hold the touch button (2)
longer. The device name and the software version are displayed at the bottom
of the screen.
1. Screen of the main menu. We can change the watch face by holding down
the touch button (2). After the menu, we move with short touches of the button
(2). The functions are selected by a long press of the button (2).
2. Sport: Activity data from the current day, number of steps, distance
covered, calories burned.
10. Find: Phone search function. Starts an audible alarm on the phone.
7. Message: Last notification from the connected phone.
6. Weather: Weather information.
5. Sleep: Sleep monitor that displays the time of the last sleep.
8. Sport: several sports activities to choose from. To end the selected activity,
press the touch button (2) for a longer time. Steps, distance covered, calories
burned will be included in the activity statistics of the current day.
4. Blood: Blood pressure monitor.
9. Sec: Stopwatch function.
possible to change units of measure, weight (User tab> Device settings). After
connecting the band to the phone, recording automatically starts and
analyzing physical activity and sleep. After disconnection, the band display
shows the time and information about the activity. The data is also stored in
the memory of the band.
DISPLAY MENU
WEARHEALTH APPLICATION
Main Screen
On the main screen of the
application, we'll see activity
statistics from the current day. By
clicking "Measurement" we will
launch a remote health index
measurement using the band's
sensors. By clicking the tabs:
Sport, Sleep, Heart Rate, we will
display reports from previous
periods in the lower half of the
screen.
1
Heart rate measurement, attention:
To start measuring the heart rate / pressure from the
band, go to the selected function and wait for the results
to appear. Before you start measuring, make sure that
the sensor touches your skin. The measurement area
should be kept clean, soiling can negatively affect the
result. Keep your body relaxed and motionless during
tests. Hold the device at the same height as your heart,
do not talk during the test. The measurement should
last at least 1 minute to get the optimal result.
For the function to work, the
application must have permanent
access to the GPS..
In this tab, we can record the
selected activity and the route we
are traveling using the phone's
GPS. By clicking the icon in the
upper right corner, we will display
previously saved activities.
Sport
•By clicking on the round
portrait icon, you can set up
any avatar.
User settings:settings related
to the user of the band.
User
In this tab, we will configure
settings related to the band user
and the device itself:
The goal of the steps:
configuration daily goal steps.
2
Sleep goal: configuring the optimal
sleep time.
Device settings:
• Brightness: on / off. the option of
awakening the screen with a hand
movement.
• Phone / SMS notifications: on / off
notifications about calls / SMS
messages.
• Do not disturb: disable new
notifications on the band.
• More notifications: select additional
notifications that will appear on the
band.
• Time format: select the 12H / 24H
time format on the device.
• Check for updates: software update
of the band.
• Factory reset: resets the band to
factory settings.
• Disconnect the device: disconnect
devices with the application.
• Alarm clock settings: on / off. and
alarm clock configuration.
Find the watch: the function of
searching the band. It activates the
vibrating alert on it.
Remote camera: remote photo
capture function. Shake the hand to
take a picture.
• Continuous HR preview: on / off.
continuous pulse measurement
function.
• Set units: select units of
measurement. More about: information about
the WearHealth application.
Table of contents
Languages:
Other Garett Watch manuals
Garett
Garett KLARA User manual
Garett
Garett Kids Life Max 4G RT User manual
Garett
Garett G11 User manual
Garett
Garett Smile User manual
Garett
Garett Lady Elegance RT User manual
Garett
Garett GT20S User manual
Garett
Garett Kids 5 User manual
Garett
Garett Kids Cloud 4G User manual
Garett
Garett Action User manual
Garett
Garett Garett Women DIANA User manual
