Furuno FMD-3200-BB Manual
Electronic Chart Display and Information System (ECDIS)
FMD-3200/FMD-3200-BB/FMD-3300
Operator's Guide
This guide provides the basic operating
procedures for this equipment. For detailed
information, see the Operator's Manual.
The brand and product names mentioned in this
guide are trademarks, registered trademarks or
service marks of their respective holders.
English
Controls
The system can be operated with the controls or the trackball module. The procedures in this operator’s guide use the trackball module.
The color and state of the LED change according to alert status.
OFF: Heater on CPU board is on.
Green, lighting: Normal operation status; no alerts generated.
Red, flashing rapidly: Alert not acknowledged nor rectified.
Red, flashing slowly: Alert not acknowledged, but rectified.
Red, lighting: SYSTEM FAIL, or acknowledged but not rectified alert.
Status LED
Turns the system on or off. (This key may or may not control
monitor on/off depending on monitor setting.)
POWER key
Rotary encoder for
VRM
Adjusts the active VRM.
VRM1, VRM2
Activates, deactivates respective VRM.
Connects a USB flash drive.
USB port (under cover)
Trackball module
Operates like a PC mouse.
Undoes the last operation, when
creating a route or user chart.
UNDO key
Selects a chart
scale.
RANGE key
Rotary encoder for EBL
Adjusts the active EBL.
EBL1, EBL2
Activates, deactivates respective EBL.
Accesses functions on the
InstantAccess bar
TM
.
Rotate: Selects item.
Push: Confirms selection.
InstantAccess knob
ESC key
Goes back one step in current
InstantAccess bar
TM
operation.
BRILL knob
Rotate:
Adjusts
the brilliance of
the monitor.
Push:
Selects a
color palette.
A/C RAIN knob
Rotate: Suppresses rain clutter.
Push: Toggles between manual and automatic rain
clutter adjustment.
Shows, hides EBLs, Instant
Access
bar
TM
, Overlay/NAV
Tools box, VRMs, Route
Information box.
Activates selected sleeping
AIS target.
Displays the detailed
target data for selected TT,
AIS target.
Sleeps selected activated
AIS target.
VIEW/HIDE key
ACQ/ACT key
TARGET DATA key
TARGET CANCEL key
A keyboard for entering
alphanumeric data.
Keyboard
Toggles operating
modes.
MFD key
Acknowledges alerts; silences
the audio alarm.
ALARM ACK key
Model
GAIN knob
Rotate:
Adjusts
the sensitivity of
the radar receiver.
A/C SEA knob
Rotate: Suppresses sea clutter.
Push: Toggles between manual and automatic sea
clutter adjustment.
EBL1 box,
EBL2 box
VRM1 box,
VRM2 box
Permanent warning box
222
Chart Display Layout
R
R
XTD Limit:
XTD:
CLEAR
RADAR
TC:
ECDIS
ECDIS
Larger scale ENC available
Chart scale, presentation mode box Cursor position box
X
TD Limi
t
:
XTD:
TC:
a
le EN
E
e
E
le
e
C availabl
e
Status bar (see page 3)
CLEAR
RADAR
Sensor information box
Own ship functions box
Route information box
R
121.8°
10.1kn
0.3kn
121.5
°
10.1kn
35°18.956'N
139°48.684'E
Ship off screen
Lower
section
InstantAccess bar
TM
(see page 4)
Upper
section
Log
10.1kn
10.1kn
10 Aug 2016
Local UTC ±0:00
07:19
Tools box
Overlay/NAV
Tools box
Alert
box
ECDIS
380
AIS COM Error
380
AIS COM Error
Status Bar (chart for radar mode)
33
3
How to open a drop-down list
How to open a drop-down list
Drop-down
list
Click button
Indicates a
drop-down list.
SILENT
10.1kn
10.1kn
10 1k
10 1kn
10.1kn
Operating mode Selects the operating mode: ECDIS, RADAR, CONNING, or AMS*.
NAVI Selects the Voyage navigation mode.
CHARTS Selects the Chart maintenance mode.
PLAN Selects the Voyage planning mode.
OTHERS Sets system in silent mode (standby); plays back data
(AMS* connection must be off).
CHART ONLY
Shows only the chart,
when left button is
pressed and held down.
STD DISP
Restores the standard display
for the chart object display
mode.
Chart database
Selects the chart database (IMO
BASE, IMO STD, IMO ALL or
CUSTOM) for displayed ENC.
Displays the operator's
manual, chart program no.
and system information.
User profiles,
Settings menu
Manages user
profiles; opens
the Settings
menu.
Date
Displays the date; selects the
time to use, local or UTC.
Time
Displays the time.
Working indicator
Rotates clockwise if
the system is working
properly.
R
CLEAR RADAR
Hide radar overlay, AIS
symbols and TT
symbols, when any of
the above-mentioned
items are displayed.
Greyed out otherwise.
E
ECDIS
Chart type selection
Selects which chart type
to display (vector or
raster), when both are
available.
* Optional specification
08 Aug 2016
Local UTC ±0:00
16:38
Log
ECDIS
Instant Access BarTM
Voyage navigation mode Chart maintenance mode
Voyage planning mode
44
4
Upper section (by chart operating mode) Lower section
Chart Legend:
Displays chart info when
own ship is at center of
screen.
Viewing Dates:
Shows “display date”
dialog box.
Chart 1:
Provides overview of
chart symbols.
SET:
Shows or hides chart
features; sets chart
alerts.
TWO DISP:
Splits the screen in two,
horizontally or vertically.
NtoM:
Displays Notice to
Mariners info.
Shows or hides
software keyboard.
MOB:
Enters a MOB mark.
Takes a screenshot.
Restores previous
condition in route and
user chart creation.
Report:
See reports on
waypoints and
voyage planning
related routes and
user charts.
Guide Box:
Provides range and bearing information between the last
waypoint and the cursor position when creating a route.
Route: Creates a route (see page 5).
User Chart: Creates a user chart (see page 7).
Manage Data:
Deletes, imports routes and user charts.
NtoM
TCS
ECDIS
Route:
- Select/Unselect monitored route.
- Switch monitored route to Voyage
planning mode for editing.
Instant Track
:
Creates temporary track to return
to or deviate from monitored route.
User Chart:
Select/unselect monitored user chart.
Monitor INFO:
Show Monitor [Information] dialog
box.
Stop Monitor:
Stop monitoring user chart and route.
Voyage
TCS TCS
Setting TCS
State
Go
AW
Go
SEA
FAP-3000,
PR-6000/9000
TCS TCS
State
FAP-2000, PT-500A
NP-5400, PT-900
TCS State:
Shows or hides the
Track Control Status window.
GoAW,GoSEA:
Activates
respective autopilot steering
mode.
Log:
Records user/position
events to the event log;
accesses various logs.
TCS OP TCS
State
Go
AW
Go
SEA
Gate-1*:
A
utomatically installs Gate-1 provided
charts and licenses.
AUTO Import:
Starts automatic installation of the chart
data (CD or DVD ROM).
Manage Charts:
Manages chart cells (grouping, deleting,
etc.).
Cell Status:
Shows the chart catalog to get info about
charts installed in the system.
License:
Manages chart licenses.
Public Key:
Manages public keys.
Sync Config:Selects units to synchronize.
Sync Status:
Checks synchronization status.
Gate-1 Config*: Gate-1 chart management.
Reconvert: Reconverts SENC data.
Clear Charts: Clears charts.
Manual Update:
Inserts chart update
symbols manually.
Mini Conning:
Shows, hides the
mini conning display.
Shows, hides the
weather overlay.
Weather
Overlay:
Opens the Message
dialog box to
manage AIS Safety
and NAVTEX
messages.
*Shown only
with Gate-1
connection.
Adjusts brilliance of
monitor and backlighting
for control unit.
UNCALIB
Selects a color palette.
Routes
Route
PLAN
55
5
Click [New].
Click [New].
Continue entering waypoints.
WPT1
Click a position
to mark a waypoint.
WPT3
25.8°
1470.2NM
WPT2
106.9°
1748.5NM
WPT6
WPT5
161.4°
353.3NM
WPT4
309.0°
971.4NM
WPT1
201.5°
2137.2NM
At last waypoint,
right-click and
select [Finish].
Plan
-ning
How to create, check a route
Click [OK].
Enter name
for route.
1
2
642.30NM
Click [Save].
Click [Save].
642.30NM
Click [Check
Results] tab.
Click [Check
Route].
Routes (con’t.)
Manage
Data
666
Click [Select Route].
How to select a route to monitor
To stop monitoring a route:To stop monitoring a route:
How to view route waypoint information
Click [Monitor INFO].
How to delete a route
PLAN
Route
Delete
Check route(s)
to delete.
1
Click [Delete].
Stop
Monitor
Voyage
Click
[Open].
Select a route.
0.9 m
37
341.2°
0.50 NM
4.70 NM
XTD Limit:
XTD:
0.9 m
37
341.2°
0.50 NM
4.70 NM
XTD Limit:
XTD:
In Voyage
navigation mode,
right click
anywhere.
In Voyage
navigation mode,
right click
anywhere.
25 Apr 2016
p
2
5 A
pr 2
2
2
2
2
2
016
016
016
016
016
016
016
016
016
016
016
016016016
016
016
016
6
6
6
05 Apr 2016
21 Mar 2016
02 Feb 2016
21 June 2016
07 May 2016
25 Apr 2016
05 Apr 2016
Route selected.
25 Apr 2016
Click
[Waypoints]
tab.
Check route(s)
to delete.
TC:
TC:
User Charts
Click object to draw.
Area
Circle
77
7
(3) Click
(2) Click
(1) Click
(4) Right-click;
select [Finish].
How to create a line
How to create a line
How to create a circle
How to create a circle
How to create an area
How to create an area
(1) Click
(2) Click
(4) Right-click;
select [Finish].
Click [Save].
Click [Save].
Click [Save].
Click [New].
Click [New].
Enter name
for user chart.
Example objects
(1) Click
(2) Drag cursor;
click to set.
Tidal:
- Current
- Predicted
Clearing line:
- NMT
- NLT
Line:
- Coast - Route
- Nav - Depth
How to create a user chart
PLAN
Plan
-ning
User
Chart
(3) Click
1
2
Label:
- Label
- Point
Right-click to
open options.
Right-click to
open options.
User Charts (con’t)
Plan
-ning
Circle or area
Circle or area
Point on a line
Point on a line
Manage
Data
User
Chart
Click [Mariner] tab.
Check item(s).
Right- click
Right- click
Right- click the point
to delete.
Right- click the point
to delete.
88
8
Click [Save].
Click [Save].
t1
C
har
t
UserC
erC
r
r
r
er
erC
C
Click [User Chart]
tab.
Click.
Select user chart to link.
(Multiple selections
possible.)
Click [Save].
Click [Save].
How to select objects to display in user chart How to link a user chart to a route
How to delete objects from a user chart
How to delete user charts
DISP SET
Symbol
DISP
1
2
3
PLAN Route
1
34
PLAN
2
3
3
2
3
Click [Open].
Route selected.
24 Apr 2016
24 Apr 2016
12 Apr 2016
15 Jun 2016
05 May 2016
01 May 2016
Select
[DeletePoint].
Select [Delete].
Check chart(s)
to delete.
1
)
Click [Delete].
Click [Select].
Chart Operations
Control chart
objects
Control basic
chart settings
SET
Basic
Setting
DISP
Chart
DISP
Control
navigational
features
Symbol
DISP
99
9
How to control visibility of chart objects
Chart Operations
Manual
Update
Click object to add.
1010
10
SET
DISP
Chart
Alert
Click [Planning] tab.
Click
[Commit].
Select object from
Drawing type.
Right-click
Right-click
Select [Pick Report].
Right-click.
Right-click.
How to set safety contours and chart alerts
How to find chart object information (ENC chart)
How to manually insert a “new” chart object
NAVI
NAVI
1
Click [Add].
Click [Add].
2
Put cursor on location
where to insert object
then click.
Set safety
contour here.
(Alarm): Audio+visual indications
(Warning): Visual indication
(Caution): No indication
㻭
㼃
㻯
Click to select chart alert type:
Click icon to switch between
and vice versa.
㻯㼃
To turn off display of a chart object in route monitoring, remove check
mark from alert (alarm, warning, caution).
Select an object.
1
2
Click [Select].
Click an attribute to
show its description.
3
2
Other manuals for FMD-3200-BB
1
This manual suits for next models
2
Table of contents
Other Furuno Monitor manuals
Furuno
Furuno MU-170C User manual
Furuno
Furuno PM30 User manual
Furuno
Furuno MFD12 User manual
Furuno
Furuno NAVnet 1722 User manual
Furuno
Furuno NavNet TZtouch3 TZT9F Manual
Furuno
Furuno TZTL12F Manual
Furuno
Furuno Mu 120c User manual
Furuno
Furuno TZT12F Manual
Furuno
Furuno FMD-3300 Manual
Furuno
Furuno NAVNET TZTOUCH2 TZTL15F User manual
