Full Swing KIT User manual
FULL SWING KIT USER GUIDE
CONTENTS
Legal Noces
Before First Use
Copyright Noce
Meet The Full Swing KIT
Contents
Compability
LED States
Seng Up the KIT
Charge the KIT
Download the Full Swing App
Create a Full Swing Account
Pairing the KIT
Congure Wi-Fi
During First-Time Pairing
Congure or Change Wi-Fi Network Manually
Update Firmware
KIT Placement
Using the App
Starng a Pracce Session
Pracce Session with an Exisng KIT
Pracce Session with a New KIT
Understanding the Live Session View on iPhone
Last Shot Tab
Dispersion Tab
All Shots Tab
Starred Tab
Session Sengs
Understanding the Live Session View on iPad
Dispersion Tab
Last Shot Tab
All Shots Tab
Starred Tab
Session Sengs
Understanding Historical Data Views
Stats
Sessions
Starred
User Account and Preferences
Subscripon
My Bag
My Devices
Using the Apple Watch
Using the KIT Without the App
Main Menu
Select a Club
4
4
4
5
5
5
6
7
7
7
8
8
9
9
9
10
11
12
12
13
13
14
14
15
15
16
16
18
18
19
20
20
21
23
23
24
26
26
27
27
28
29
30
31
31
Set Target Line
Data Views
Units of Measurement
Connecon Info
Baery Info
Device Info
Safety and Regulatory
Advanced Features
Maintenance
Caring for the KIT
Best Pracces for KIT Storage
Baery Safety Warnings
Troubleshoong the App
Support
31
31
32
32
32
32
33
33
34
34
34
35
36
37
LEGAL NOTICES
BEFORE FIRST USE
COPYRIGHT NOTICE
Carefully review the Full Swing Golf (doing business as Full Swing) Full Swing KIT User Guide
as it contains informaon regarding safe usage and storage of the Full Swing KIT. Failure to read
and follow these noces and guidelines may result in serious injury or death.
Full Swing has made every eort to provide clear, complete, and accurate informaon in the
Full Swing KIT User Guide. Full Swing will not be held responsible for issues arising due to
typographical errors or user interpretaon of the language used herein that is dierent from
that intended by Full Swing. All safety informaon and guidelines are subject to change due to
changes in local, federal, and all other applicable laws. Full Swing reserves the right to revise this
document and to make changes in the content without obligaon to nofy any persons of such
revisions or changes. In no event shall Full Swing, its employees, or authorized representaves
be liable for any damages or losses, direct or indirect, arising from the use of any technical or
operaonal informaon contained in the Full Swing KIT User Guide.
Any unauthorized changes or modicaons to the Full Swing KIT without wrien permission
from Full Swing will void the warranty of the Full Swing KIT and user authority to operate the
Full Swing KIT.
This Full Swing KIT User Guide is copyright 2021 Full Swing Golf (doing business as Full Swing).
All worldwide rights and remedies under all intellectual property laws and industrial property
laws are reserved. Full Swing Golf Registered U.S. Patent and Trademark Oce.
The Full Swing KIT, going forward, is referred to only as KIT in this user guide.
• iPhone® (10 and higher), running iOS 14 and higher
• iPad® (7th generaon and higher), running iOS 14 and higher
• iPad® Air (3rd generaon and higher), running iOS 14 and higher
• iPad® Pro (all models), running iOS 14 and higher
• Apple Watch® 3 or higher, running watchOS 7 or higher
• Apple AirPods® or most any Bluetooth® headphones
• Carrying Case
• KIT Launch Monitor
• Charging Cable
• Charger
MEET THE FULL SWING KIT
COMPATIBILITY
CONTENTS
Use the following LED styles to determine the state of the KIT.
App connected
Status LED Acvity Status Descripon
Boot up
Charging
Installing update
Power down
Power up
Seek
Tracking
Warnings
A warning state has occured,
for example:
• Temp warning at 53°C/127°F
• Temp shutdown at 55°C/131°F
• Baery level warning at 10%
• Baery level shutdown at 1%
• App disconnect warning
A ball is in ight and is currently
being tracked.
The unit radar is acve and ready
to track a shot.
The unit is currently powering up.
The unit is currently powering down.
The rmware is currently updang.
The unit is preparing to operate.
The app is connected to the
Bluetooth and Wi-Fi.
The unit is charging
(When the bar turns solid white,
the unit is fully charged.)
LED STATES
Cauon: Use only the equipment provided with the KIT. Using non-product specic
chargers and cables may result in damage to the KIT.
1. Gently open the rubber charging port cover on the le side of the KIT, then aach the
charging cable.
2. Insert the charging cable into the charger and insert the other end of the charger into the wall.
Note: Charging begins automacally and may take up to 5 hours.
Note: It is possible to pair and congure the KIT while charging.
The Full Swing app is compable with Apple iPhone® and
iPad® running iOS 14 or higher.
Download the app by QR Code or through the Apple App Store.
QR Code
1. Open the iPhone/iPad camera to be paired with the KIT.
2. Hold the camera over the QR Code so that the QR Code
is clearly visible in the screen.
Note: The camera should automacally scan the QR Code.
3. Follow the Apple App Store prompts.
Apple App Store
1. Open the iPhone/iPad to be paired with the KIT.
2. Click hp://appstore.com/fullswing, or open the Apple App
Store, then search for Full Swing.
3. Select the Full Swing app, then click Get.
4. Follow the Apple App Store prompts.
SETTING UP THE KIT
CHARGE THE KIT
DOWNLOAD THE FULL SWING APP
Use these steps to create an account on the app.
1. Open the app, then click the Create a Full Swing Account buon.
2. Enter the requested user informaon in the elds.
3. Click the Create Account buon.
Note: A screen with the message Please Check Your Email opens and directs the user
to conrm the email.
4. Open the email account, then click the Verify Email link.
Note: If no email arrives, return to the app, click the Re-send link, and follow the prompts.
5. Return to the app.
Note: A screen with the message Welcome to Full Swing! opens.
6. Follow the prompts to complete the prole setup.
CREATE A FULL SWING ACCOUNT
Use these steps to pair the KIT with the mobile device.
1. Conrm the KIT is plugged in and charging, but do not power on at this me.
Powering on the KIT occurs later.
2. In the Pair Device screen, tap the Find Devices buon.
3. Follow the onscreen instrucons to pair the KIT.
Note: If there are mulple units, tap the Power buon on the unit and locate the
Device Name in the upper le corner of the OLED display.
Note: If pairing is unsuccessful, visit the Help Center at kitsupport.fullswinggolf.com
PAIRING THE KIT
Connecon to Wi-Fi is required for rmware updates. When connected, any new rmware
updates will automacally download and install. Wi-Fi can be congured using one of
two methods:
When pairing with the KIT for the rst me, the user is prompted to congure Wi-Fi.
1. On the Congure Device screen, select a familiar Wi-Fi name from the opons provided.
2. Follow the prompts to congure Wi-Fi.
The Wi-Fi network can be congured or changed at any me using the following method.
Note: The unit must be paired, and in charging mode or powered on, to modify Wi-Fi sengs.
If the KIT does not appear on the My Devices screen, see Pairing the KIT.
1. From the Pracce tab, tap the Prole icon in the upper, le corner.
2. Tap My Devices.
3. Tap the Device Name to be modied.
4. In the Wi-Fi Network secon, tap the Congure or Change buon.
5. Follow the prompts to modify Wi-Fi sengs.
CONFIGURE WI-FI
DURING FIRST-TIME PAIRING
CONFIGURE OR CHANGE WI-FI NETWORK MANUALLY
New rmware updates will automacally download and install when the unit is connected to
Wi-Fi. Download me is dependent on Internet speed. Following download, rmware
installaon could take up to 15 minutes to complete.
Note: The LED ashes amber while the rmware installaon is underway. Do not power o
the unit aer the rmware installaon begins and unl installaon is complete.
1. Ensure the unit is plugged into the charger but do not power the unit on.
Note: Firmware updates will automacally download and install while in charging mode.
If the KIT is fully powered on (with the LED bar pulsing blue), the rmware update will
download; however, installaon will not happen unl the next me the KIT is powered
on or o.
2. Ensure the unit is connected to Wi-Fi.
Note: If unsure, tap the Power buon to view Wi-Fi indicator in the upper, right corner.
For addional informaon, see Congure Wi-Fi.
3. Allow any rmware updates to download and install prior to operang the unit.
An amber LED indicates that the rmware is
currently updang. However, if the LED
is pulsing blue, do not power o the unit
because installaon is underway.
UPDATE FIRMWARE
Other manuals for KIT
1
Table of contents
Other Full Swing Sport & Outdoor manuals
