Fujitsu MAX3036RC SERIES User manual

C141-C012-01EN

MAX3036RC, MAX3073RC, MAX3147RC SERIES

MAY2036RC, MAY2073RC SERIES

DISK DRIVES

SERIAL ATTACHED SCSI INTERFACE

SPECIFICATIONS

C141-C012

FOR SAFE OPERATION

Handling of This Manual

This manual contains important information for using this product. Read thoroughly before using

the product. Use this product only after thoroughly reading and understanding especially the

section "Important Alert Items" in this manual. Keep this manual handy, and keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

This product is designed and manufactured for use in standard applications such as office work,

personal devices and household appliances. This product is not intended for special uses (atomic

controls, aeronautic or space systems, mass transport vehicle operating controls, medical devices

for life support, or weapons firing controls) where particularly high reliability requirements exist,

where the pertinent levels of safety are not guaranteed, or where a failure or operational error could

threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use).

Customers considering the use of these products for mission-critical applications must have safety-

assurance measures in place beforehand. Moreover, they are requested to consult our sales

representative before embarking on such specialized use.

First Edition October 2005

The contents of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any media without

the express written permission of Fujitsu Limited.

C141-C012

Revision History

(1/1)

Edition Date Revised section (*1)

(Added/Deleted/Altered) Details

01 2005.10.31 — —

*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.

This page is intentionally left blank.

C141-C012 i

Preface

This manual explains concerning the 3.5 inch hard disk drives with internal Serial

Attached SCSI (SAS) controller.

The purpose of this manual is to provide the specifications and functions of SAS

for use of these magnetic disk drives incorporated into user systems, and to present

the information necessary for creating host system software. This manual is

written for users who have a basic knowledge of hard disk drives and their use in

computer systems.

The composition of manuals related to these disk drives and the range of subjects

covered in this manual are shown in “Manual Organization,” provided on a

subsequent page. Please use these other manuals along with this manual as

necessary.

The organization of this manual, related reference manual and conventions for

alert messages follow.

Overview of Manual

This manual consists of the following six chapters, glossary, abbreviation, and

index:

Chapter 1 SAS Interface

This chapter describes the topology, physical and electrical requirements, interface

protocol, and other operations of the interface.

Chapter 2 Command Processing

This chapter describes the basic logical specifications related to command

processing.

Chapter 3 Data Buffer Management

This chapter describes the data buffer configuration, data transfer processing

functions and cache operations.

Chapter 4 Command Specifications

This chapter describes detailed command specifications and how to use them.

Preface

ii C141-C012

Chapter 5 Sense Data and Error Recovery Methods

This chapter describes the configuration and contents of sense data which report to

the host system when an error occurs, etc., key information necessary for error

recovery, recommended procedures for error recovery to be executed through host

system software and retry processing.

Chapter 6 Disk Media Management

This chapter describes the procedure for initializing the disk media, methods of

treating media defects and data recovery methods.

Glossary

The glossary explains technical terms which are necessary to the reader’s

understanding when reading this manual.

Acronyms and Abbreviations

This list shows the full spelling of abbreviations used in this manual.

Index

Preface

C141-C012 iii

CONVENTIONS USED INTHIS MANUAL

The model names of the disk drives covered by this manual differ depending

on their device types and capacity (*1). In addition, these disk drives are called

Intelligent Disk Drive (IDD), "drive" or "device" in this manual.

Note: Model Name

M AX 3 147 RC

Interface type

Formatted capacity (1,000MB units)

* 1MB=1,000,000bytes

Disk size 3: 3.5 inch

2: 2.5 inch

Type AX: 3.5 inch height, 15,000rpm

AW: 3.5 inch height, 10,025rpm

AY: 2.5 inch height, 10,025rpm

Decimal numbers are represented normally.

Hexadecimal numbers are represented as shown in the following examples:

X’17B9’, 17B9h, 17B9H, or 17B9H.

Binary number is represented as "010", 010b.

An X is used to represent mode parameters that are ignored by the MODE

SELECT and MODE SELECT EXTENDED commands. An X is also used

to represent mode parameters reported by the MODE SELECT and MODE

SELECT EXTENDED commands and that vary depending on conditions at

the time.

Preface

iv C141-C012

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert

message consists of an alert signal and alert statements. The alert signal consists

of an alert symbol and a signal word or just a signal word.

The following are the alert signals and their meanings:

This indicates a hazardous situation likely to result in

serious personal injury if the user does not perform

the procedure correctly.

This indicates a hazardous situation could result in

serious personal injury if the user does not perform

the procedure correctly.

This indicates a hazardous situation could result in

minor or moderate personal injury if the user does

not perform the procedure correctly. This alert

signal also indicates that damages to the product or

other property, may occur if the user does not

perform the product correctly.

This indicates information that could help the user

use the product more efficiently.

In the text, the alert signal is centered, followed below by the indented message. A

wider line space precedes and follows the alert message to show where the alert

message begins and ends. The following is an example:

(Example)

It is possible to use bit 7 and bit 6 of the control byte as an inherent

control field in future product specifications. It is recommended that

the INIT specify zero in this field.

Attention

Please forward any comments you may have regarding this manual.

To make this manual easier for users to understand, opinions from readers are

needed. Please write your opinions or requests on the Comment at the back of this

manual and forward it to the address described in the sheet.

Preface

C141-C012 v

Product Manual

1. Outline

2. Specifications

3. Data Format

4. Installation Conditions

5. Installation Procedure

6. Diagnosis and Maintenance

Interface Specifications

(This Manual) 1. Serial Attached SCSI (SAS) Interface

2. Command Processing

3. Data Buffer Management

4. Command Specifications

5. Sense Data and Error Recovery Methods

6. Disk Media Management

Maintenance Manual 1. Specifications and Equipment Configuration

2. Maintenance and Diagnosis

3. Troubleshooting

4. Removal and Replacement Procedures

5. Operating Theory

MANUAL ORGANIZATION

Preface

vi C141-C012

REFERENCED STANDARDS

The product specifications and functions described in this manual conform to the

following standards:

Specification

(document) number Name Concerned

organization

T10/1562-D

Revision 05 Serial Attached SCSI (SAS) American national

Standards Institute

(ANSI)

T10/1601-D

Revision 07 Serial Attached SCSI-1.1 (SAS-1.1) American national

Standards Institute

(ANSI)

T10/1236D

Revision 20 Information technology SCSI Primary

Commands-2 (SPC-2) American national

Standards Institute

(ANSI)

T10/996D

Revision 8C Information Technology SCSI-3 Block

Commands (SBC) American national

Standards Institute

(ANSI)

T10/1157D

Revision 24 Information technology SCSI-3 Architecture

Model (SAM-2) American national

Standards Institute

(ANSI)

T10/1561

Revision 13 Information technology SCSI-3 Architecture

Model (SAM-3) American national

Standards Institute

(ANSI)

Other manuals for MAX3036RC SERIES

This manual suits for next models

Table of contents

Other Fujitsu Storage manuals

Fujitsu

Fujitsu MBB2147RC SERIES User manual

Fujitsu

Fujitsu GP5-HD4E71 User manual

Fujitsu

Fujitsu M2488 User manual

Fujitsu

Fujitsu MHG2102AT - Mobile 10 GB Hard Drive User manual

Fujitsu

Fujitsu MPF3204AH User manual

Fujitsu

Fujitsu HandyDrive-5 User manual

Fujitsu

Fujitsu SPARC S7-2 User manual

Fujitsu

Fujitsu MAN3367FC - Enterprise 36.7 GB Hard Drive User manual

Fujitsu

Fujitsu MAB3091FC Series User manual

Fujitsu

Fujitsu MHV2100BH User manual

Fujitsu

Fujitsu MHA2021AT User manual

Fujitsu

Fujitsu ETERNUS AB Series Assembly Instructions

Fujitsu

Fujitsu FibreCAT S80 User manual

Fujitsu

Fujitsu MHU2100AT User manual

Fujitsu

Fujitsu MHZ2080BJ User manual

Fujitsu

Fujitsu MBA3073 SERIES User manual

Fujitsu

Fujitsu ETERNUS DX60 Reference manual

Fujitsu

Fujitsu ETERNUS DX60 S3 User manual

Fujitsu

Fujitsu ETERNUS CS800 User manual

Fujitsu

Fujitsu MAP3147FC User manual

Fujitsu

Fujitsu MAN3184 SERIES User manual

Fujitsu

Fujitsu MPC3045AH User manual

Fujitsu

Fujitsu ETERNUS DX60 S2 User manual

Fujitsu

Fujitsu ETERNUS LT20 S2 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide