Fujioh BUF-01M User manual
1U020181
READ AND SAVETHESE INSTRUCTIONS.
Keep this manual in a convenient place for future reference.
FUJI INDUSTRIAL CO., LTD.
TABLE OF CONTENTS
Safety Instructions............................................................................. 2
Part Names ....................................................................................... 4
How to Use........................................................................................ 4
Replacement of Light Bulb ................................................................ 5
Filter Maintenance............................................................................. 6
Prior to Requesting Service............................................................... 8
Requesting Service ........................................................................... 8
Specifications .................................................................................... 9
Circuit Diagram.................................................................................. 9
Parts List ......................................................................................... 10
Warranty .......................................................................................... 11
Operation Manual
BLOWER UNIT
FOR CUSTOM-MADE RANGE HOODS
MODEL: BUF-01M
2
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
SAFETY INSTRUCTIONS
Before installation and operation, read these instructions carefully and use this product only in the manner
described by the manufacturer in the operation manual.
The signal words shown below are used to alert you to potential personal injury and property damage hazards.
There are three hazard classifications based on potentially dangerous situations.
Obey all safety instructions that show these symbols to avoid possible injury, death and property damage.
WARNING:WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION:CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION:CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
WARNING
1. TO REDUCETHE RISK OF FIRE, ELECTRIC SHOCK, OR INJURYTO PERSONS, OBSERVE
THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally.When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
2. TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy
spillovers that may ignite.Heat oils slowly on low or medium settings.
b) Always turn hood ON when cooking at high heat or when cooking flaming foods.
c) Clean ventilating fans frequently.Grease should not be allowed to accumulate on fan or filter.
d) Use proper pan size. Always use cookware appropriate for the size of the surface element.
3. TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP
GREASE FIRE, OBSERVE THE FOLLOWING:
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner.
BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE
AND CALL THE FIRE DEPARTMENT.
b) NEVER PICK UP A FLAMING PAN - you may be burned.
c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will
result.
d) Use an extinguisher ONLY if:
1) You have a class ABC extinguisher, and know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
4. Do not place any electrical parts in water or spray water on them.Such a situation could result
in fire or electrical shock.
5. In the situation of a potential gas leakage, do not switch the unit on and off as it could result in
a gas explosion.
3
CAUTION
3. Read specification label on this product for further information and requirements.
2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside.Do not vent
exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.
6. Keep your hands and other objects away from the fan while it is in motion.If not, personal
injury or damage may result.
4. Switch power off at the service panel when you won’t be using the blower unit for a long
period. If you do not do so, damage to the electrical insulation may result.
5. Fasten the filter and other parts securely.Incorrect attachment may result in personal injury
or damage to property.
1. For General Ventilating Use Only. Do not use to exhaust hazardous or explosive material
and vapors.
7. To protect hands from injury from the edges of the sheet metal, wear working gloves while
servicing.
: means prohibition.It indicates actions, if any, that
mustn’t be done.
!: means forcible execution. It indicates actions, if any,
that must be done.
NOTE: The safety instructions are explained with the following
pictographic symbols.
4
how to use
CAUTION
• During cooking, do not touch the filter or filter screws.If the filter is attached incorrectly,
it may become detached and fall down injuring person(s).
• Keep your hand and other objects away from the blower unit while it is in motion, or it
may result in personal injury or damage.
NOTE
• While cooking, use the blower unit or damage may result to the blower unit from high
temperature.
• Do not use the stove, unless you are cooking with pans and the like. If overheating
occurs, the blower unit may become damaged due to high temperature.
1) Control the blower and the light with the control switch buttons.
2) The light button is on the right side.Push LIGHT button to turn on.
3) The blower has three switch buttons.HIGH, MEDIUM and LOW.
HIGH: In case of heavy cooking (smoke).
MEDIUM: Usual position.
LOW: In case of light cooking (smoke).
4) Push OFF button (on the left side) to stop the blower and turn the light off.
part names
5
replacement of light bulb
When the attached light bulb burns out, replace it with a new locally purchased bulb.
Purchase bulb with the following specification.
• Mini-bulb: 120V, 40W • Size of screw: 17mm
WARNING
Before replacing the light bulb, push the OFF button and switch power off at the service
panel. Do not handle or push switches with wet hands as this could result in electrical
shock.
CAUTION
If the bulb burns out, wait until the light bulb has cooled off before removing, or you may
burn your hand.
Ordering Replacements
1
Remove one screw and swing the
lamp cover down in the direction of
the arrow.
2
Unscrew the burned out bulb and
remove it.
3
Install a new 40W bulb (locally
purchased).
4
Replace the lamp cover in the direction
of arrow and tighten the screw.
6
WARNING
• Before cleaning, push the OFF button and switch power off at the service panel. Do
not handle or push switches with the wet hands as this could result in electrical
shock.
• Always wear safety glasses or goggles and working gloves when cleaning.
• Keep people away when cleaning to avoid injury from unexpected falling of filter or
splashing of detergent.
CAUTION
• Wipe filter gently to avoid injury to your hand on the corners or edges.
• Do not use thinner, scouring powder and alkaline detergents or the like.Using these
materials may result in changing the quality or color of the filter.
• When using chemically treated cleaning cloths or the like, refer to and carefully follow
the product's instructions.
disassembling and assembling
WARNING
Refasten the filter and other parts securely. Incorrect attachment may result in personal
injury or damage to property.
Removing the Filter
While holding the filter in one hand, remove the screw, then slide to the right until it is
freed of the latches.
Replace the filter following the instructions above in reverse order.
filter maintenance
7
WARNING
• Do not place any electric parts in water or spray water on them.This could result in
fire or electrical shock.
• Do not operate the blower without the filter in place.This could result in injury to
person.
NOTE
Clean the filter at least once a month to avoid grease contamination and grease
build-up.
Cleaning the Filter
Cleaning the Front Cover
how to clean
Clean the filter with a mild detergent and
soft cloth or brush.Then rinse with water
and dry before replacement.
Clean the front cover with a mild
detergent and a soft cloth.Then wipe with
water using a clean soft cloth.
8
prior to requesting service
Prior to requesting service, do the following check by yourself for common errors.
requesting service
NOTE
• Service parts are kept at the manufacturer for a maximum of six years after ceasing
the production of this model.
• Requesting service indirectly can be done through contacting the dealer who sold
this blower unit to you.
• When the blower unit is not working normally even after checking common errors,
please provide the following information to Fuji Industrial USA, Inc. (FIU).
Fuji Industrial USA, Inc. 16300 Christensen Rd., Ste 212
Seattle WA 98188-3403
Telephone: 1-888-547-9880
a. Product -------------------------- Blower Unit
b. Model Number ----------------- BUF-01M
c. Date of purchase
d. What is the problem?
e. Owner's address
f. Owner's telephone number
g. Suggested date for service person's visit
•The model number is indicated on the
inspection label, which is on the opposite
side of the filter.
Situation Check
Blower unit does not operate. Is power switch on at the service panel?
Blower unit is noisier than usual Is the filter contaminated by grease?
or vibrating.
9
Motor
Connector
Connector
Terminal
Capacitor
Red
Red
Red
White
White
Orange
Brown
Blue
White
Orange
Brown
Blue
Green
Green
Black
Black
White
Orange
Brown
Blue
Green
Black
120V 60Hz
Bulb:Max40W
Control Switch
specifications
circuit diagram
Refer to the following table.
NOTE
FUJI INDUSTRIAL CO., LTD. has measured airflow and noise levels under Japanese
Industrial Standard (JIS) C9603 items 8.8 and 8.9.
Voltage (V) Speed Frequency Power Air Flow Noise Level
(Hz) Consumption (W) (CFM) (Sone)
120 Hi 60 98 240 2.8
120 Med 60 66 180 1.7
120 Low 60 28 100 0.5
10
parts list
2
1
4
73
8
9
5
6
10
11
12
15
17 16
18
19
14
13 20
One(1) Piece
Attachment
Four(4) Pieces
Four(4) Pieces
Screw
M5 × 30
M5
Nut with plate
Seal
Name of parts Figure
No. Component / Part
1 Enclosure
2 Exhaust Pipe Unit
3 Earth Wire Unit
4 Motor
5 Wire Holder
6 Seal
7 Sirocco Fan
8 Wire Box Unit
9 Wire Cover
10 Motor Wire Cover
11 Partition Board
12 Bellmouth
13 Lamp Box Unit
14 Lamp
15 Front Cover
16 Lamp Cover
17 Filter
18 Switch Mount
19 Control Switch Unit
20 Attachment
Other manuals for BUF-01M
1
Table of contents
Languages:
Other Fujioh Ventilation Hood manuals
Fujioh
Fujioh BUF-06P User manual
Fujioh
Fujioh BUF-03A User manual
Fujioh
Fujioh FDR-4200 User manual
Fujioh
Fujioh NL-900V User manual
Fujioh
Fujioh BUF-06W User manual
Fujioh
Fujioh MF-1100V User manual
Fujioh
Fujioh FR-HS1870 Manual
Fujioh
Fujioh FDK-03A User manual
Fujioh
Fujioh FS-700 User manual
Fujioh
Fujioh BUF-03R User manual
Fujioh
Fujioh FR-MS1970V User manual
Fujioh
Fujioh BUF-04J User manual
Fujioh
Fujioh BUF-06P User manual
Fujioh
Fujioh FR-CL1890VP User manual
Fujioh
Fujioh 800L MK2 User manual
Fujioh
Fujioh FR-ST2190VP User manual
Fujioh
Fujioh BUF-01A User manual
Fujioh
Fujioh NL-900V User manual
Fujioh
Fujioh BUF-08P User manual
Fujioh
Fujioh BUF-08P User manual
