FSR HD-H-SP-TX User manual
HD-H-SP-TX
HD-H-SP-RX
100m HDBaseT HDMI Extender Set
244 Bergen Boulevard, Woodland Park, NJ 07424 Tel 973-785-4347
FAX 973-785-3318 Web: www.fsrinc.com
43080 LIT1540
User Manual
2
Important Safety Instructions
Contents are subject to change without notice
Warnings
To reduce the risk of fire, electric shock or product damage:
1. Do not expose this device to
rain, moisture, dripping or
splashing and that no objects
filled with liquids, such as vases,
shall be placed on the unit.
6. Clean this device only
with dry cloth.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other device
(including amplifiers) that
produce heat.
5. Do not place sources of open
flames, such as lighted candles,
on the unit.
7. Unplug this device
during lightning storms or
when unused for long
periods of time.
8. Protect cables and
cords from being walked
on or pinched particularly
at plugs.
9. Only use
attachments/accessories
specified by FSR.
manufacturer.
10. Refer all servicing to
qualified service
personnel.
3
Table of Contents
Overview.............................................................................................. 4
Features............................................................................................... 5
Package Contents ................................................................................ 6
Typical Application................................................................................ 7
HD-H-SP-Tx Front Panel ...................................................................... 8
HD-H-SP-Tx Rear Panel....................................................................... 9
HD-H-SP-Rx Front Panel.....................................................................11
HD-H-SP-Rx Rear Panel..................................................................... 12
Hardware Installation .......................................................................... 13
IR Control........................................................................................... 14
Scenario 1................................................................................... 14
Scenario 2................................................................................... 15
RS-232 Control and Firmware Updates ............................................... 16
Scenario 1: Firmware Update .................................................... 16
Scenario 2: RS-232 Control ....................................................... 16
Troubleshooting.................................................................................. 16
Specifications ..................................................................................... 17
4
Overview
The HD-H-SP series HDBaseT extenders can extend the signals up to 100
meters with a single Ethernet cable. It supports HDMI, Ethernet, bi-directional IR,
bi-directional RS-232 and bi-directional PoE. The extenders can be powered by a
single power supply and its PoE circuitry can power the extender at the far end.
The transmitter and receiver modules are easy to install and space saving.
The Extenders are ideal for home, office, digital entertainment centers, control
centers, conference rooms, schools and corporate training environments.
5
Features
HD-H-SP-Tx – 100 Meter HDBaseT Slim-Pack Transmitter
• HDMI In to HDBaseT Out (RJ-45)
• RS-232 via 3-Pin Captive Screw Terminal (Tx, Rx, GND)
• IR RX & TX via 1/8” mini jacks
• 12VDC Power via screw connector or 2-Pin Captive Screw Terminal (12V &
GND)
• Ethernet Port (RJ-45)
• Unit Dimensions: (W x L x H) 7.72” x 3.73” x 0.71” (196.1mm × 18.1mm ×
99.3mm)
HD-H-SP-Rx – 100 Meter HDBaseT Slim-Pack Receiver
• HDBaseT In (RJ-45) to HDMI Out
• RS-232 via 3-Pin Captive Screw Terminal (Tx, Rx, GND)
• IR RX & TX via 1/8” mini jacks
• 12VDC Power via screw connector or 2-Pin Captive Screw Terminal (12V &
GND)
• Ethernet Port (RJ-45)
• Locking power supply included
• Unit Dimensions: (W x L x H) 7.72” x 3.73” x 0.71” (196.1mm × 18.1mm ×
99.3mm)
6
Package Contents
HD-H-SP-Tx and HD-H-SP-Rx are sold separately.
HD-H-SP-Tx Transmitter:
One 2-pin screw-down terminals
One 3-pin screw-down terminals
One IR Emitter
One IR Receiver (30kHz ~ 50kHz)
Two Mounting Ears
HD-H-SP-Rx Receiver:
One 2-pin screw-down terminals
One 3-pin screw-down terminals
One IR Emitter
One IR Receiver (30kHz ~ 50kHz)
Two Mounting Ears
12VDC 2A power supply
7
Typical Application
NOTE: It is only necessary to power one side (Tx or Rx)
HD-H-SP-Rx
HD-H-SP-Tx
CATx CABLE
BLUE-RAY
DVD
TV
IR RECEIVER
CABLE
IR RECEIVER
CABLE
IR EMITTER
CABLE
TV REMOTE
IR EMITTER
CABLE
DVD REMOTE
NORMAL
UPDATE
HDMI INTx RxIR OUTIR IN
+
-DC 12V
-
+
NORMAL
UPDATE
HDMI OUTTx RxIR OUTIR IN
+
-DC 12V
-
+
ETHERNET
RJ
RJ
PC
ALTERNATE
POWER INPUT
POWER
SUPPLY
INCLUDED
ALTERNATE
POWER INPUT
POWER SUPPLY
(SOLD SEPARATELY)
8
HD-H-SP-Tx Front Panel
ID Name Description
1 Power LED
ON: Unit is powered ON
OFF: Unit is powered OFF
2 Status LED
Intermittent: Normal operating condition
OFF: Fault
3 HDCP LED
ON: HDCP video is being transmitted
OFF/Intermittent: No HDCP video is being
transmitted
4 Link LED
ON: Receiver and Transmitter are linked to each
other
OFF/Intermittent: Fault in unit(s) or cabling
PWR STATUS HDCP LINK
FSR HD-H-SP-Tx
4321
9
HD-H-SP-Tx Rear Panel
ID Name Description
1 Power
Connect to a power supply via a power adapter to
either the transmitter or receiver side 12VDC input
Note: It is only necessary to power one side (Tx or
Rx)
2 HDBT OUT RJ-45 connection to the receiver via a CAT5e/CAT6
CAT6A / CAT7 cable
3 IR IN Connect to an IR receiver cable
4 IR OUT Connect to an IR emitter cable
5 RS-232 Used to connect to a computer to update firmware
or connect a RS-232 control device
7.72
NORMAL
UPDATE
HDMI INTx RxIR OUTIR IN
+
-DC 12V
-
+
RS-232
MODEETHERNETHDMI INIR OUTIR INHDBT OUT12V GNDDC12V RS-232
FSR HD-H-SP-Tx
100m Transmitter
HDMI - 4k, IR, RS-232,
ETHERNET, PoE HDBT
123 4 5 6 7 8
10
ID Name Description
6 HDMI IN Connect to a source device
7 Ethernet
Ethernet connection for a router, switcher or
computer, etc
Orange: Link-Activity
Green: Speed 100Mbps
8 Switch Mode
Normal:
RS-232 pass through capability enabled
Firmware cannot be updated
Update:
RS-232 pass through capability disabled
Firmware can be updated
This manual suits for next models
1
Table of contents
Other FSR Extender manuals
