FSR DV-HXT-1 HDMI User manual
USER MANUAL
DV-HXT-1 HDMI to CAT5e /6 EXTENDERS
244 Bergen Boulevard, Woodland Park, NJ 07424 Tel 973-785-4347 FAX 973-785-3318
Web: www.fsrinc.com
LIT1375A
2
3
Proprietary Information
All information in this manual is proprietary to and the property of FSR Inc. This
publication is protected by the Federal Copyright Law, with all rights reserved.
No part of this document may be reproduced, transcribed, or transmitted, in
any form or by any means, without prior explicit written permission from FSR
Inc.
Unpacking
Each HDMI Extender over single Cat package includes the following items:
- DV-HXT-1 Transmitter Unit
- DV-HXT-1 Receiver Unit
- 5V Power Adapter x 2 pcs.
- HDMI Cable x 2 pcs.
- User manual
Cautions:
1. FSR logo is a trademark of FSR Inc.
2. HDMI is a trademark of HDMI licensing, LLC.
3. Specification may be changed without any notice in order to
improve the function of the product.
4. The design and specification of the product may be change
without any prior notice.
4
5
Table of Contents
Proprietary Information............................................................................................ 3
Description, General Specification .......................................................................... 6
Environmental and Reliability Specifications...........................................................7
Main Features ......................................................................................................... 9
Video Connection..................................................................................................10
Troubleshooting.....................................................................................................13
Mechanical Specification....................................................................................... 14
Technical Specification..........................................................................................15
Limited Warranty................................................................................................... 17
6
Description, General Specification
Sends HDMI signals over long distances using a single Cat cable
Compact size and low power design
Uses inexpensive CAT6 and 6e cable
Simple, low cost installation.
ITEM DESCRIPTION
Model Name DV-HXT-1
Input Signal HDMI
Output Signal HDMI
Resolution Cat6e: 164ft (50m) at 1920x 1080p
Cat5e: 130ft (40m) at 1920x 1080p
Receptacle DC Power Jack
HDMI 19 Pin Female
RJ45
HDCP/EDID Support Compliant/Save EPROM
Power Consumption 5V Power Adapter(Included)
Max 2 W
Dimension 5.1”x 4.13”x 1.18” (130 x 105 x 30 mm)
Weight TX, RX: 0.79lbs. (0.36Kg) each
7
Environmental and Reliability Specifications
Recommended environmental conditions for the operation are temperature
range of 50°– 104°F (10°C– 40°C), non-condensing humidity levels of 10%–
80%, and altitude ceiling of 9,840 feet (3,000 meters).
Environmental limits for transportation are temperature range of -13°– 122°F
(-25°C– 60°C), non-condensing humidity levels of 5%– 95%, and altitude
ceiling of 49,200 feet (15,000 meters)
Environmental limits for storage are established at temperature range of
-13°– 122°F (-20°C– 45°C), non-condensing humidity levels of 5%– 95%, and
altitude ceiling of 9,840 feet (3,000 meters)
The HDMI Cat extender is expected to function for more than 50,000 hours of
use at a 90% confidence level. The device is tested according to the identical
standards for testing LCD monitors.
8
9
Main Features
High Quality Picture - No Signal Loss and Adjustment Free
Our DV-HXT-1 is built to deliver the highest quality picture preserving the
native resolutions of the video sources without signal loss. The digital signal
level is self-adjusting.
Signal Amplification for signal reliability and long distance transmission.
Cutting edge FSR design transmits high quality video signals over long
distances.
Compact and Practical Design
The DV-HXT-1’s compact design can be used in tight spaces.
HDCP (High-bandwidth Digital Content Protection)
DV-HXT-1 fully supports HDCP
Currently every digital visual product sends high resolution signal with HDCP
contents.
Compliance to DDWG Ver 1.0
DV-HXT-1 plus fully supports the DDWG Ver.1.0
Built in EDID Read and save functions
Built in Extended Display Identification Data (EDID) read function, with
Electrically Erase Programmable Read-Only Memory (EEPROM), to save
display EDID data while supporting any monitor with maximum resolutions.
The unit also supports user set up of non-Video Electronics Standards
Association (VESA) resolution, including projectors with unique resolutions.
EDID [Extended Display Identification Data]
EDID is defined by a standard published by the Video Electronics Standards
Association (VESA). The EDID includes manufacturer name, product type,
phospher or filter type, timings supported by the display, display size,
luminance data and (for digital displays only) pixel mapping data.
10
Video Connection
Step 1: Ensure the digital video/audio source and display are turned off.
Step 2: Manually set the rotary switch to the native resolution of the display if it
is different than the default resolution of 1920x1080P 2ch Audio
(Default setting of “D” on rotary switch).
NOTE: If the native resolution of your display is not listed in the Mode table,
follow the steps for “EDID data saving (Set Mode 0)” below.
Step 2: Connect the HDMI cable and CAT cable to DV-HXT-1 transmitter and
receiver.
Step 3: Connect the power adapter to the DV-HXT-1 transmitter and receiver.
Step 4: Power up the display. Set the display to the correct DVI or HDMI
Source input.
Step 5: Power up the source.
EDID data saving (Set Mode 0)
For Displays with unique resolutions not listed in the table below or if the “Video
Connection” steps above do not produce a usable image follow this procedure:
NOTE: The HDMI input connector on the DV-HXT-1 Transmitter has a dual
function. It is normally used as a source input but is also used to save EDID
information from the Display by following the steps below.
Step 1: Set rotary switch to mode 0.
Step 2: Connect HDMI Input port on DV-HXT-1 Transmitter (TX) unit to the
display.
Step 3: Power up the display and DV-HXT-1 Transmitter unit.
Step 4: Push the EDID Switch for 2-4 seconds at DV-HXT-1 Transmitter unit.
Step 5: The EDID green LED will illuminate for about 2-3 seconds if the EDID
was saved correctly.
If the EDID was not saved correctly, the EDID LED will blink 6 times. The
default EDID when it is shipped is 1080p (1920x1080 @60Hz, 2ch audio).
Saving EDID will display the best resolution between the video source and
the display.
Table of contents
Other FSR Extender manuals
