Commissioning Sequence
Before using the soap dispenser for the first time the
following sequence must be carried out.
Fill the bottle full of soap.
Locate the dispense button on the side of the pump.
Press and hold the button until soap is dispensed
from the spout. This will ensure the dispenser tube
and cable are full of soap.
Operation
Place the hands under the spout within the sensing
range.
Once the users' hands have been detected a small
amount of soap will be dispensed from the spout
into the users' hands.
General Information
Our sensor soap dispensers have a non-touch
control which uses infrared sensing technology to
detect human presence. Once detected, the spout
instantly dispenses soap and automatically stops
once the user moves their hands away to eliminate
unnecessary wastage, whilst creating a more
hygienic washroom solution.
All products manufactured and supplied by Fontana
are safe and comply to legislative requirements.
Providing they are installed correctly and receive
regular maintenance in accordance with these
instructions your user experience will not be
affected.
Incorrect Installation
Keep sensor range adjustment
within 4 inches away from center
of spout. This can only be done
with optional remote control.
Installing electronic soap dispenser
& faucet with intersecting centerline
might lead to accidental activation
of either or both.
Faucet FaucetSoap
Dispenser
Soap
Dispenser
Correct Installation
Keep sensor ranges
factory preset.
Keep soap spout & faucet
centerlin parallel.
Faucet Faucet
Soap
Dispenser
Soap
Dispenser
Sensor Faucet & Soap Dispneser Installation
Care & Cleaning
• Wipe away any debris adhering to the spout or
sensor.
• Wipe away debris with a damp cloth containing a
suitable amount of a neutral, dishwashing
detergent. Then wipe clean with a damp cloth.
• When cleaning around the sensor, please be
careful not to scratch the surface of the sensor
window.
• Do not use detergent that might damage the
surface of spout. These include:
• Detergents containing acid, chlorine bleach or
alkali.
• Detergents that are coarse granules in nature, such
as polishing powder.
• Solvents such as paint thinner or benzene.
• Abrasive aids such as nylon scrubbers/brushes,
steel wool, etc.
Hygienic
The proximity sensor removes the need to touch the
spout body, reducing the spread of germs and
reducing the chance of cross infection.
For more details, visit the product page:
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
6
