Focal Point F820906 Programming manual

ASSEMBLY & INSTALLATION INSTRUCTIONS

Please note : Except where otherwise stated, all rights, including copy-

right in the text, images and layout of this booklet is owned by Focal

Point Fires Ltd.You are not permitted to copy or adapt any of the con-

tent without the prior written permission of Focal Point Fires Ltd.

All instructions must be handed to the user for

safekeeping.

Revision B- 05/21

MODELS COVERED BY THESE INSTRUCTIONS

F820906 MAINE GREY-OAK FIRE SURROUND

.FoFocal Point Fires Ltd

Christchurch, Dorset BH23 2BT

Tel: 01202 49933499330

Fax: 01202 499326

www.focalpointfires.co.uk

e : [email protected]

Focal Point Fires Ltd

RBK House, Irishtown, Athlone,

Co. Westmeath, N37 XP52,

Ireland Tel: 01202 499330

Fax: 01202 499326

www.focalpointfires.co.uk

e: [email protected]

ASSEMBL Y INSTRUCTIONS

GB IE

1.0 IMPORTANT NOTES

Section

1.0

2.0

3.0

4.0

5.0

6.0

7.0

Contents

Important notes

Tools required

Hardware & parts list

Assembly

Installation

Cleaning/ finishing

Guarantee - terms and conditions

Page No.

4.0 Assembly4

5.0 Installation 5

2.0 TOOLS REQUIRED

3.0 HARDWARE & PARTS LIST

To ensure safe and stable installation:

1.The assembled Fire Surround must be fixed / secured to wall.

2.The wall must be sturdy and in good repair.

3. Some walls require alternative fixings (not included).

4.When drilling into the wall, check for hidden pipes and cables.

5.There are two options for construction of this surround.

A - with rebates - If you are installing this surround with a gas fire, or an electric fire where there is space in the wall to recess

the fire, this means the laminate / marble is up against the wall.

B - with out rebates - If using this surround with an electric fire and a flat wall you will need to remove the rebates, instead use

the spacer frame from the fire.

Cross head screwdriver PZ2 (3 inches in length or greater)

Drill, 6mm and a 2mm suitable drill bit

Pencil

Tape measure

16PCS

4.0 ASSEMBLY

GB IE

Gently lay both legs you have prepared onto a suitable protected surface. Be extremely careful not to scratch the front edges

of the legs. DO NOT DRAG THE LEGS! Make sure that the legs are lifted everytime they are moved to avoid them from

being damaged.

Using a drop of glue (I) in each dowel hole, insert two dowels (A) in to the left side panel (6). Again, using a drop of glue (I) in

the dowel holes take the front panel (2) and push them on to the dowels (A). Use 2x wood screws (D) to screw the parts

together. Repeat the process for the right side panel (7) and front panel (2).

Fixings

A x 4 PCS

D x 4 PCS

STEP 1

Fixings

A x 6PCS

Dx 9PCS

Using a drop of glue (I) in each dowel hole, insert 2x dowels (A) in to the left side panel (6). Again, using a drop of

glue (I) in the dowel holes take the inside leg (5) and push them on to the dowels of the left side panel (6).

Use 3x wood screws (D) to screw the inside leg (5) to the left side panel (6). Repeat the process to secure the other

two inside legs (5) to the right side panel (7) and front panel (2).

STEP 2

Fixings

4.0 ASSEMBLY

GB IE

Fixings

A x 2 PCS

B x 5 PCS

C x 5 PCS

STEP 3

If using option A only. If rebates are not being used go to section 5.

Use the glue (I) in the dowel holes before inserting 2x dowels (A) into the left and right hand panels (6and 7). Position the

cam bolts (C) in to left and right side panels (6and 7).

Take the left side and the right side legs (3and 4), put some glue (I) in to the dowel holes. Connect the side legs (3 and 4) to

the side panels (6 and 7), make all the inserts are in the correct position. Insert the cam locks (B),turn the cam locks (B)

clockwise to lock the parts together.

4.0 ASSEMBLY

Insert 5x cam locks (C) and glue (I) 2x wood dowels (A) into the legs, side panels and front panel (2,3,4,6 & 7).

Next prepare the top panel (1) by screwing all 5x cam bolts (C) into position. The dowel joints (A) need to be glued in at both

ends of the top panel. Connect the top panel to the surround, making sure all inserts are in the correct position. Once home,

all 5x cam locks (B) can be tightened into position.

STEP 4

⑥

⑦

⑤

②

③

④

⑥

⑤

⑦

Fixings

B x 6 PCS

C x 6 PCS

Ax 4PCS

Before carrying out any of the following operations, ensure that the appliance is OFF and completely cold. Regularly clean

around the appliance to ensure that dust, fluff, pet hair etc, are kept to a minimum.There are no other specific requirements for

care, other than regular cleaning of the general appliance.

A wipe with a dry cloth is normally sufficient. DO NOT use abrasive cleaners as they can damage the finish.Test on a hidden

part before cleaning. Clean only in the direction of the grain. Regularly check the surround is securely fixed in position.

7.0 GUARANTEE - TERMS AND CONDITIONS

The 3 year guarantee commences from the date of purchase, provided that the terms and conditions are adhered to:

Registration is not required.

1. For any claim to be made within the 3 years from date of purchase you will be required to provide and supply us with your

proof of purchase.

Making a claim is easy.

If you wish to make a claim under our 3 year guarantee and all the terms and conditions for your product have been met then

please submit the following information for the attention of the 3G Service Department to the address below.Alternatively, you

can email or fax. Please note that this does not affect your statutory rights.

Focal Point Fires Ltd, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT.

Alternatively email: 3g@focalpointfires.co.uk or fax. 01202 499326.

Details required:

1. Name, full address including post code and contact telephone number.

2. Receipt of purchase or credit card statement.

F820805

As our policy is one of continuous improvement and development, we hope therefore you understand we must retain the right to amend details and/or specifications without prior notice.

6.0 CLEANING/ FINISHING GB IE

5.0 INSTALLATION GB IE

Fixings

E x 2 PCS

F x 4 PCS

G x 2 PCS

H x 2 PCS

With a pencil mark out the desired height where you would like the mirror brackets (H) to be situated on the rear of the legs. To avoid

splitting the leg, pre drill the bracket holes with a 2mm drill bit. Now attach the brackets to the legs using the 3x12mm screws (F). Once

the brackets are in position, centre and level the hearth into its final fitting position. Position the surround on the hearth to correspond

with the header/ fireplace lintel, mark with a pencil on the wall where you wish to drill. Remove the surround and prepare the wall from

the marked positions. If using the fixings supplied, drill a hole in the wall using a 6mm drill bit. If not, use a suitable drill bit for the wall

plugs you are using. Insert the wall plugs (G) into position. Offering the surround back up into position against the wall, you are now

able to secure the surround to the wall using the 4x30mm screws (E).

Table of contents

Other Focal Point Indoor Fireplace manuals

Focal Point

Focal Point Elysee Fanflue User guide

Focal Point

Focal Point SLIMLINE EVOKE Assembly Instructions

Focal Point

Focal Point blenhein multiflue Assembly Instructions

Focal Point

Focal Point BLENHEIM STYLE Guide

Focal Point

Focal Point Charmough Assembly Instructions

Focal Point

Focal Point Centrurion 30 User manual

Focal Point

Focal Point Excelsior Fanflue User guide

Focal Point

Focal Point PANORAMIC COMPLETE ELECTRIC SUITE Assembly Instructions

Focal Point

Focal Point KENSINGTON REALITY User manual

Focal Point

Focal Point HANNINGTON Assembly Instructions

Focal Point

Focal Point Excelsior Expanse Guide

Focal Point

Focal Point NOIR L23 Assembly Instructions

Focal Point

Focal Point LEXINGTON EF655SLB-E Assembly Instructions

Focal Point

Focal Point vesailles User guide

Focal Point

Focal Point TUSCANY Guide

Focal Point

Focal Point EF11-36 PASADENA Assembly Instructions

Focal Point

Focal Point Osmington Assembly Instructions

Focal Point

Focal Point EKOFIRES EKO 5090 Assembly Instructions

Focal Point

Focal Point eko 3040 Guide

Focal Point

Focal Point PLASMA CAPELLA PLATINUM Guide

Focal Point

Focal Point EVOKE F500176 Assembly Instructions

Focal Point

Focal Point 18" High-Tech User manual

Focal Point

Focal Point EBONY ELECTRIC Assembly Instructions

Focal Point

Focal Point SAN FRANCISCO CHARLESTON Assembly Instructions

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual