Fluke ProSim 4 User manual

PN 3931478

January 2011, Rev. 3, 2/15

All product names are trademarks of their respective companies.

ProSim™4

Vital Signs Simulator

Getting Started

Warranty and Product Support

Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from the date of

original purchase OR two years if at the end of your first year you send the instrument to a Fluke Biomedical service center

for calibration. You will be charged our customary fee for such calibration. During the warranty period, we will repair or at our

option replace, at no charge, a product that proves to be defective, provided you return the product, shipping prepaid, to

Fluke Biomedical. This warranty covers the original purchaser only and is not transferable. The warranty does not apply if the

product has been damaged by accident or misuse or has been serviced or modified by anyone other than an authorized

Fluke Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE

EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

This warranty covers only serialized products and their accessory items that bear a distinct serial number tag. Recalibration

of instruments is not covered under the warranty.

This warranty gives you specific legal rights and you may also have other rights that vary in different jurisdictions. Since

some jurisdictions do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages,

this limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by a court or

other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.

7/07

Notices

translated into any language without the written permission of Fluke Biomedical.

Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service

training programs and other technical publications. If you would like other reproductions or distributions, submit a written request to

Fluke Biomedical.

Unpacking and Inspection

Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking

the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking

instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or

broken parts, dents, or scratches.

Technical Support

For application support or answers to technical questions, either email techservices@flukebiomedical.com or call 1-800-850-4608 or

1-440-248-9300. In Europe, email techsupport.emea@flukebiomedical.com or call +31-40-2965314.

Claims

Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in

their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not

operate within specifications, or if there are any other problems not caused by shipping damage, please contact Fluke Biomedical or your local

sales representative.

Returns and Repairs

Return Procedure

All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When you return an

instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that

you insure your shipment for its actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are

received in damaged condition due to improper packaging or handling.

Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:

Use a double–walled carton of sufficient strength for the weight being shipped.

Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.

Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.

Returns for partial refund/credit:

Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order

Entry Group at 1-440-498-2560.

Repair and calibration:

To find the nearest service center, go to www.flukebiomedical.com/service or

In the U.S.A.:

Cleveland Calibration Lab

Tel: 1-800-850-4608 x2564

Email: [email protected]

Everett Calibration Lab

Tel: 1-888-99 FLUKE (1-888-993-5853)

Email: [email protected]

In Europe, Middle East, and Africa:

Eindhoven Calibration Lab

Tel: +31-40-2675300

Email: [email protected]

In Asia:

Everett Calibration Lab

Tel: +425-446-6945

Email: [email protected]

To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product be calibrated at least

once every 12 months. Calibration must be done by qualified personnel. Contact your local Fluke Biomedical representative for

calibration.

Certification

This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing specifications when it was

shipped from the factory. Calibration measurements are traceable to the National Institute of Standards and Technology (NIST). Devices for

which there are no NIST calibration standards are measured against in-house performance standards using accepted test procedures.

WARNING

Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards or improper

operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment modifications.

Restrictions and Liabilities

Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the

information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedical

for the use or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its affiliated dealers.

Manufacturing Location

The ProSim4 is manufactured at Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.

Table of Contents

Title Page

Introduction .................................................................................................................... 1

Intended Use.................................................................................................................. 1

Safety Information .......................................................................................................... 2

Symbols ......................................................................................................................... 3

Unpack the Product........................................................................................................ 3

Accessories.................................................................................................................... 4

Instrument Familiarization .............................................................................................. 6

How to Turn On the Product........................................................................................... 10

How to Change the Display Language ........................................................................... 10

Maintenance................................................................................................................... 11

How to Clean the Product.......................................................................................... 12

Battery Maintenance.................................................................................................. 13

How to Charge the Battery ................................................................................... 13

Battery Removal ................................................................................................... 15

General Specifications ................................................................................................... 16

ProSim™ 4

Getting Started

Detailed Specifications .................................................................................................. 17

Normal-Sinus-Rhythm Waveform ............................................................................. 17

Arrhythmia ................................................................................................................ 17

ECG-Performance-Testing ....................................................................................... 18

Respiration................................................................................................................ 18

Invasive Blood Pressure ........................................................................................... 19

Non-Invasive Blood Pressure.................................................................................... 19

Presets and Autosequences ..................................................................................... 20

iii

List of Tables

Table Title Page

1. Simulation Types................................................................................................................... 1

2. Symbols................................................................................................................................. 3

3. Standard Accessories ........................................................................................................... 4

4. Optional Accessories............................................................................................................. 5

5. Product Controls and Connections........................................................................................ 7

6. Display Features ................................................................................................................... 9

ProSim™ 4

Getting Started

Table of contents

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide