FlexDSL ORION 3 Parts list manual

User Manual LTU Orion 3

FlexDSL ORION 3

LTU DEVICES

TECHNICAL DESCRIPTION AND OPERATIONS MANUAL

Version 1.16

Document name UM_Flexdsl-LTU-Orion3_V1-16.Docx

Revision 30. August 2018

User Manual LTU Orion 3

be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into

any language, or transmitted in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, photocopying, manual, or otherwise, without the prior written permission of

FlexDSL Telecommunications AG. Published by FlexDSL Telecommunications AG. All rights

reserved.

 User Manual LTU Orion 3 

 
VERSION CONTROL.................................................................................................................8 
SAFETY REGULATIONS ..........................................................................................................8 
EU DIRECTIVE 2002/96/EC AND EN50419 ..............................................................................9 
1SELECTION GUIDE .........................................................................................................10 
2PRECAUTION ..................................................................................................................11 
3TECHNICAL DESCRIPTION ............................................................................................12 
1 General Information about FlexDSL Orion3................................................................12 
2 Description of Orion3 LTU Devices.............................................................................13 
2.1 Remote Power Supply and Wetting Current........................................................14
2.1.1 Compatibility of Remote Power and Wetting Current Supply Modes ............14 
2.1.2 Configuration of Remote Power and Wetting Current Supply.......................14
2.2 Description of Orion3 Interfaces..........................................................................17
2.2.1 SHDSL Interface..........................................................................................17 
2.2.1.1 Master/Slave.............................................................................................17
2.2.1.2 Multipair Mode..........................................................................................18 
2.2.1.3 Reservation Mode.....................................................................................19 
2.2.1.4 Automatic Configuration of a Link .............................................................22 
2.2.2 E1 Interface (G.703/704)..............................................................................24 
2.2.2.1 Framed and Unframed E1 ........................................................................24
2.2.2.2 CRC4 (Cyclic Redundancy Check)...........................................................24 
2.2.2.3 AIS Generation (Alarm Indication Signal)..................................................24 
2.2.2.4 AIS Detection............................................................................................25
2.2.2.5 Е1 Clock Modes .......................................................................................25
2.2.3 Nx64, RS-232/RS-485 and G.703/E0 Interfaces ..........................................26 
2.2.3.1 Nx64 Clocking Modes...............................................................................27 
2.2.3.2 Automatic V.54 Loops...............................................................................28 
2.2.4 Input Sensor and Output Relay....................................................................28
2.2.5 Ethernet Interface.........................................................................................29
2.2.6 MAC Filter....................................................................................................32 
2.2.6.1 MAC Filter Rules.......................................................................................33 
2.2.7 IEEE 802.1x Access Control ........................................................................33
2.2.7.1 IEEE 802.1x Device Settings....................................................................34 
2.2.8 Rapid Spanning Tree Protocol .....................................................................34
2.2.9 RADIUS .......................................................................................................35
2.2.9.1 RADIUS Server Setup with Defined Vendor Specific Attributes ................36 
2.2.9.2 Simplified RADIUS Server Setup..............................................................38 
2.2.9.3 RADIUS Server setup with defined Service-Type Attribute.......................39 
2.2.9.4 Configuring User Access Rights ...............................................................39
2.2.10 LLDP............................................................................................................41 
2.3 An Integrated Switch of 64-kbit/s Time Slots.......................................................42
2.3.1 E1 Transmission Mode (only E1 Time Slots)................................................42 
2.3.2 E1, Nx64/RS-232/RS-485 and Ethernet Simultaneous Transmission Mode.42 
2.4 Test Loops..........................................................................................................43 
2.4.1 Analogue Loop back ....................................................................................44 
2.4.2 Performance Monitoring...............................................................................44 
2.4.3 G.826 Performance Monitoring ....................................................................44
2.5 BERT Test ..........................................................................................................45 
3 Alarm Indication .........................................................................................................46 
3.1 LEDs...................................................................................................................46 
3.2 Alarm LEDs.........................................................................................................47 
4 Management of Orion 3 Devices................................................................................49 
4.1 Management by Local Craft Terminal or MONITOR Interface (RS-232 Interface)49 
4.2 Management by Ethernet Interface .....................................................................50 
4.2.1 Telnet...........................................................................................................50 
4.2.2 WEB.............................................................................................................51 
4.2.3 SNMP ..........................................................................................................54 
4.2.4 SSH.............................................................................................................56 

 User Manual LTU Orion 3 

 
4PROGRAMMING GUIDE..................................................................................................57 
1 Command Structure...................................................................................................57 
2 Orion3 Software .........................................................................................................59 
3 Configuration and Application Storage .......................................................................59
4 Groups of Commands Requiring Confirmation...........................................................61
5 Command Syntax.......................................................................................................61 
6 Commands.................................................................................................................62
6.1 Main Menu ..........................................................................................................62 
6.1.1 System Invitation..........................................................................................62
6.2 General Commands............................................................................................63
6.2.1 <H> Command.............................................................................................63
6.2.2 <APPLY [ALL/GROUP]> Command.............................................................63 
6.2.3 <CONNECT N:1..13/R> Command..............................................................63
6.2.4 <LINK [SN/00/FE]> Command.....................................................................63
6.2.5 <LINKCLEAR> Command............................................................................63
6.3 Performance Management Menu........................................................................64
6.3.1 <H> Command.............................................................................................64
6.3.2 <G826> Command.......................................................................................64 
6.3.3 <G826 Е1> Command .................................................................................65 
6.3.4 <ALLG826 N> Command.............................................................................66 
6.3.5 <RESETG826> Command...........................................................................66 
6.3.6 <RESETALLG826 N> Command.................................................................66 
6.3.7 <NETSTAT [LAN/WAN]> Command ............................................................67 
6.3.8 <NETERR [LAN/WAN]> Command..............................................................67
6.3.9 <RESETNETSTAT> Command ...................................................................68
6.3.10 <LINKSTAT> Command ..............................................................................68 
6.3.11 <LINKALARM> Command ...........................................................................69 
6.3.12 <ALARMLOG [N]> Command......................................................................69
6.3.13 <LINKDIAG> Command...............................................................................69
6.3.14 <M> Command ............................................................................................70 
6.4 Fault and Maintenance Management Menu ........................................................71
6.4.1 <H> Command.............................................................................................71
6.4.2 <NM> & <LINKNM> Command....................................................................72 
6.4.3 <STATUS> Command .................................................................................72
6.4.4 <STATUS ETH> Command .........................................................................73
6.4.5 <STATUS EXT> Command..........................................................................73 
6.4.6 <STATUS LLDP> Command........................................................................73 
6.4.7 <STATUS RADIUS> Command...................................................................74
6.4.8 <STATUS DOT1X> Command.....................................................................74 
6.4.9 <STATUS ENCODE> Command .................................................................74
6.4.10 <LOOP1 ON/OFF [N=1..4]> Command........................................................75 
6.4.11 <LOOP2 [N:A/R] [ON/OFF]> Command.......................................................75 
6.4.12 <ALARM> Command...................................................................................75
6.4.13 <AСO [GROUP ON/OFF])> Command ........................................................77
6.4.14 <MACTABLE> Command............................................................................77
6.4.15 <LLDP STAT [IF/ALL]> ................................................................................78
6.4.16 <STARTAL [N]> Command..........................................................................79 
6.4.17 <RESTART [N=1..4]> Command .................................................................79 
6.4.18 <RESET> Command....................................................................................79
6.4.19 <CONFIRM> Command...............................................................................79 
6.4.20 <BACKUP> Command.................................................................................79 
6.4.21 <RESTORE> Command..............................................................................79
6.4.22 <DIFF N/R/S/B N/R/S/B> Command............................................................80 
6.4.23 <DUMP N/R/S/B> Command.......................................................................80
6.4.24 <LOAD> Command......................................................................................81 
6.4.25 <TLM> Command........................................................................................81 
6.4.26 <TLM S [N:[Rnn-Rkk]] [ABC]> Command.....................................................82 
6.4.27 <POWER DIAG> Command ........................................................................82 
6.4.28 <LOG> and [LOG C] Command...................................................................83 
6.4.29 <SOFTUPDATE> Command........................................................................83
6.4.30 <TFTP [CMD] [ARG1][ARG2]> Command ...................................................84 

 User Manual LTU Orion 3 

 
6.4.31 <SOFTCONFIRM> Command .....................................................................84 
6.4.32 <SOFTINFO> Command .............................................................................85 
6.4.33 <PING x.x.x.x> Command............................................................................85 
6.4.34 <MODEMVIEW> Command.........................................................................85
6.4.35 <SD SNAPSHOT> Command......................................................................85 
6.4.36 <SD DIR> Command ...................................................................................85
6.4.37 <SD DEL [NAME]> Command .....................................................................85
6.4.38 <SD SAVE [N=0..9]> Command...................................................................86 
6.4.39 <SD LOAD [N=0..9]> Command ..................................................................86 
6.4.40 <SD BOOT [ON/OFF]> Command...............................................................86 
6.4.41 <SD STATUS> Command ...........................................................................86
6.4.42 <BERT> Command......................................................................................86
6.4.43 <H> Command.............................................................................................87 
6.5 Configuration Management Menu .......................................................................88
6.5.1 <H> Command.............................................................................................88
6.5.2 <ENCODE [NRSB]> Command ...................................................................89 
6.5.3 <ENCODE KEY [N]> Command...................................................................89
6.5.4 <ENCODE [ON/OFF] [N]> Command ..........................................................90
6.5.5 <SECURE ON/OFF> Command ..................................................................90 
6.5.6 <USERS> Command...................................................................................90 
6.5.7 <USER> Command .....................................................................................90
6.5.8 <PASSWORD {users}> Command...............................................................93
6.5.9 <CONFIG N/R/S/B> Command....................................................................93 
6.5.10 <MASTER ON/OFF [N = 1..4]> Command...................................................95 
6.5.11 <AUTO ON/OFF> Command.......................................................................95
6.5.12 <EXT ON/OFF [N = 1..4]> Command...........................................................95
6.5.13 <BASERATE K/AUTO [N=1..4]> Command.................................................96 
6.5.14 <PAM [16/32] [N]> or <PAM [4-128] [N]> Command....................................96 
6.5.15 <PAYLOAD list/NONE [N=1..4]> Command.................................................96
6.5.16 <ANNEX A/B/AB [N=1..4]> Command .........................................................97 
6.5.17 <SETCLOCK list [N=1..4]> Command..........................................................97 
6.5.18 <MULTIPAIR [2/3/4/2+2/OFF]> Command...................................................97
6.5.19 <RESERVE [list]>, <RESERVE [list] [list]> Command..................................97
6.5.20 <G704 ON/OFF [N]> Command...................................................................98
6.5.21 <CRC4 ON/OFF [N]> Command..................................................................98 
6.5.22 <AISGEN ON/OFF [N]>, <AISDET ON/OFF [N]> Commands......................98
6.5.23 <DSLTS list/NONE [N=1..4]> Command......................................................98
6.5.24 <WANTS [list] [N=1..4]> Command (Ethernet over E1)................................98 
6.5.25 <E1CLOCK [DSL/RX/EXT/INT] [N]> Command...........................................98
6.5.26 <E1MODE [HDB3/AMI] [N]>, <E1MODE [SHORT/LONG] [N]> Commands.99 
6.5.27 <POWER ON/OFF [N=1..4]> Command......................................................99
6.5.28 <ID string> Command..................................................................................99 
6.5.29 <DEFAULT [0-4]> Command.......................................................................99
6.5.30 <DEFAULT EVERYTHING> Command .......................................................99
6.5.31 <DEFAULT DESC> Command ....................................................................99
6.5.32 <SERNUM> Command................................................................................99 
6.5.33 <GSCOMPAT ON/OFF> Command...........................................................100 
6.5.34 <NMTHR> Command.................................................................................100 
6.5.35 <LATHR> Command..................................................................................100 
6.5.36 <PTMP [ADD/DEL] [IF]> Command...........................................................100 
6.5.37 <PTMP SHOW> Command........................................................................100 
6.5.38 <G703CLOCK [DSL/INT/RX]> Command..................................................100 
6.5.39 <MODE N> Command...............................................................................100 
6.5.40 <LICENSE> Command..............................................................................101 
6.5.41 <LICENSE ADD> Command......................................................................101 
6.5.42 <RSIP> Command.....................................................................................101 
6.5.43 <RSRATE [N]> Command .........................................................................104 
6.5.44 <RSFORMAT [Format]> Command ...........................................................104 
6.5.45 <RSDUPLEX [F/H] Command....................................................................104 
6.5.46 <EXTRATE [N]> Command........................................................................104 
6.5.47 <AUTOLOOP OFF/ALL/DATA> Command................................................104 
6.5.48 <EXTCLOCK [SRC] [DIR]> Command.......................................................104 

 User Manual LTU Orion 3 

 
6.5.49 <IOIP {OPTION} [IF]> Command ...............................................................105 
6.5.50 <NET> Command......................................................................................107 
6.5.51 <H> Command...........................................................................................107 
6.5.52 <NETCONFIG [N/R/S/B]> Command.........................................................108 
6.5.53 <COSCONFIG [N/R/S/B]> Command........................................................110 
6.5.54 <RSTP DEFAULT> Command...................................................................111 
6.5.55 <RSTP [A..E] [ON/OFF]> Command..........................................................111 
6.5.56 <RSTP [A..E] PRIO [value]> Command .....................................................111 
6.5.57 <RSTP [A..E] VLAN [1..8]> Command.......................................................111 
6.5.58 <RSTP [A..E] HELLO [2..10]> Command...................................................112 
6.5.59 <RSTP [IFACE] FWD [4..30]> Command...................................................112 
6.5.60 <RSTP [IFACE] MA [6..40].........................................................................113 
6.5.61 <RSTP [IFACE] PRIO [0..240]> Command ................................................113 
6.5.62 <RSTP [IFACE] PCOST [AUTO/1..200000000]> Command......................114 
6.5.63 <RSTP [IFACE] EDGE [ON/OFF]> Command ...........................................114 
6.5.64 <RSTP CONF> Command.........................................................................114 
6.5.65 <RSTP STATE> Command........................................................................115 
6.5.66 <RSTP DIAG> Command..........................................................................116 
6.5.67 <PBVLAN [IF] [A..E]> Command................................................................116 
6.5.68 <MODE [IF] [ACC/TRUNK/MIX]> Command..............................................117 
6.5.69 <VLAN [IF] [1..8]> Command.....................................................................117 
6.5.70 <QOS [IF] [0..7]> Command.......................................................................118 
6.5.71 <ALLOW [IF] [VLAN list]> Command .........................................................118 
6.5.72 <VID [1-8] ID> Command...........................................................................118 
6.5.73 <MACLIST SHOW> Command..................................................................118 
6.5.74 <MACLIST [IF] ADD [MAC]> Command.....................................................119 
6.5.75 <MACLIST [IF] DEL [MAC/N]> Command..................................................119 
6.5.76 <MACFILTER [LAN1-5] [ON/OFF]> Command..........................................120 
6.5.77 <MACRULE [LAN1-5] [RULE]> Command.................................................120 
6.5.78 <DOT1X [LAN1-5] {OPTION}> Command..................................................120 
6.5.79 <SETIP X.X.X.X> Command......................................................................121 
6.5.80 <NETMASK X.X.X.X> Command...............................................................121 
6.5.81 <GATEWAY X.X.X.X> Command ..............................................................121 
6.5.82 <MTU> Command......................................................................................121 
6.5.83 <WANIDLE [1/7E]> Command...................................................................121 
6.5.84 <ETHSD [10H/10F/100H/100F/AUTO/OFF] [N=1..5]> Command ..............121 
6.5.85 <FC [ON/OFF] [N1-4]> Command..............................................................122 
6.5.86 <IRATE [speed/OFF] [N1-4]> Command....................................................122 
6.5.87 <ERATE [speed/OFF]> Command.............................................................123 
6.5.88 <CRATE [speed] [CoS] [WAN]> Command................................................123 
6.5.89 <COS [QOS/VLAN] [N] [0..3/OFF]> Command ..........................................124 
6.5.90 <SNMPACL> Command............................................................................124 
6.5.91 <SNMP [V1|V2C|V3] [ON|OFF]> Command...............................................124 
6.5.92 <TRAPIP [1/2] [IP/OFF]> Command ..........................................................124 
6.5.93 <TRAP [1/2] [V1/V2C]> Command.............................................................125 
6.5.94 <TRAP [1/2] V3 [RO/RW]> Command........................................................125 
6.5.95 <COMMUNITY> Command........................................................................125 
6.5.96 <SNMPSET [ON/OFF]> Command............................................................125 
6.5.97 <SNMP [RO|RW] NAME> Command.........................................................125 
6.5.98 <SNMP [RO|RW] AUTH [MODE]> Command............................................125 
6.5.99 <SNMP [RO|RW] PRIV [MODE]> Command .............................................126 
6.5.100 <SYSLOG [1/2] [IP/OFF]> Command.........................................................126 
6.5.101 <LLDP [ON/OFF]> Command....................................................................126 
6.5.102 <LLDP DEFAULT> Command ...................................................................126 
6.5.103 <LLDP [PARAM] [VALUE]> Command ......................................................127 
6.5.104 <LLDP [RX/TX] [ON/OFF]> Command.......................................................127 
6.5.105 <LLDP INT VLAN [ON/OFF]> Command ...................................................127 
6.5.106 <LLDP CONFIG> Command......................................................................128 
6.5.107 <SNTP [1/2] [IP/OFF]> Command..............................................................128 
6.5.108 <SNTP TZ [+/-]HH:MM> Command ...........................................................128 
6.5.109 <DST> Command......................................................................................128
6.5.110 <[SSH|TELNET|HTTP|HTTPS] [ON/OFF]>................................................131 

 User Manual LTU Orion 3 

 
6.5.111 <SSH PORT [N]>.......................................................................................131 
6.5.112 <SSL [SHOW/DEL] [options]>....................................................................131 
6.5.113 <RADIUS [1/2] SECRET>..........................................................................132 
6.5.114 <RADIUS [1/2] TEST> ...............................................................................132 
6.5.115 <RADIUS [1/2] [IP:P/OFF]>........................................................................132 
6.5.116 <RADIUS RETRIES [0..10]>......................................................................133 
6.5.117 <RADIUS TIMEOUT [1..5]>........................................................................133 
6.5.118 <STATUS RADIUS [N/R/S/B]> Command .................................................133 
6.5.119 <NETDEFAULT> Command......................................................................134 
5SOFTWARE DOWNLOAD .............................................................................................135 
1 Software Download via RS-232 Port (LCT) Using the Flash Loader Program ..........135 
2 Software Download via RS-232 COM Port (LCT) Using Xmodem Protocol..............139 
3 Software Download via Ethernet (1K-Xmodem and Telnet)......................................142 
6SERVICE INSTRUCTIONS.............................................................................................143 
1 General Requirements .............................................................................................143 
2 Evaluation of the Digital Channel Quality and Operation Parameters.......................143 
7APPENDICES.................................................................................................................145 
1 Quick Installation Guide for Orion3 LTU Devices......................................................145 
1.1 Enter an Orion3 Device.....................................................................................145 
1.2 Configure an Orion3 Device ..............................................................................145 
1.3 Checking of Correct Working.............................................................................148 
1.4 Problem with Orion3 Device..............................................................................148 
2 Connector Description..............................................................................................149 
2.1 Ethernet Connector...........................................................................................149 
2.2 SHDSL Connector.............................................................................................149 
2.3 E1 120 Ohm Connector.....................................................................................149 
2.4 E1 75 Ohm Connector.......................................................................................151 
2.5 Nx64, RS-232 and G.703/E0 Connector............................................................151 
2.6 Monitor (LCT, Local Craft Terminal) Connector (ACU, Minirack, UTTx).............156 
2.7 Digital Input / Output Interface (4I4O) connector ...............................................157 
2.8 -48VDС Connector (UTTx) ................................................................................157 
8TECHNICAL SPECIFICATION .......................................................................................158 
1 Interfaces.................................................................................................................158 
1.1 SHDSL Line Interface........................................................................................158 
1.2 E1 Line Interface...............................................................................................158 
1.3 Nx64 and RS-232/RS-485 Interface..................................................................158 
1.4 G.703/E0 Interface............................................................................................158 
1.5 Monitor or Local Craft Terminal (RS-232) Interface...........................................159 
1.6 Ethernet ............................................................................................................159 
1.7 Digital Input / Output Interface (4I4O)................................................................159 
2 Power Supply...........................................................................................................159 
3 Environment.............................................................................................................160 
3.1 Climatic Conditions............................................................................................160 
3.2 EMC and Safety Standards...............................................................................160 
4 Physical Dimensions and Weight .............................................................................160 
 

User Manual LTU Orion 3

VERSION CONTROL

Manual

Version

Date

Software

Version

Major changes to previous version

1.0

02.11.2009

1.0.0

Initial Version

1.1

15.12.2009

1.0.0

Ethernet LED table corrected, Page 32

DB15 to 2xRJ45 adapter included, Page 89

Wetting Current Supply Jumper corrected, Page 12

1.2

19.8.2010

1.2.3

Nx64 added

1.3

27.9.2010

1.2.5

Cable corrected N21-DCE/N35-DCE, Page 96-97

Update remote power configuration, Page 13

1.4

03.01.2011

1.2.15

RSTP added

1.5

29.08.2011

1.4.8

WEB interface added, Software commands updated

1.6

27.03.2012

1.4.8

Alarm Connector corrected, Alarm Command updated, RS-

485 Connector added

1.7

03.12.2012

1.4.37

Status Ext changed, Commands adapted, MAC Filtering,

4xRS-232 Connector

1.8

07.05.2013

1.4.38

MIB’s adapted, WEB Interface, G.703 Interface included

1.9

22.10.2013

1.5.4

Connector 4xRS-232 corrected.

SSH & RADIUS added.

1.10

24.06.2014

1.6.6

SNMP& RADIUS updated, Commands updated incl. SD-Card

1.11

15.08.2014

1.6.6

2xRS485/422/232 interface card included

1.12

09.07.2015

1.6.19

LLDP chapter included

1.13

11.02.2016

1.7.2

802.1x included

4I4O daughter card included

1.14

10.02.2017

1.7.5

RADIUS Server setup with defined Service-Type Attribute

RFC-4133 Entity-MIB partially supported

RTS-CTS | DTR-DCD or RTS-DCD | DTR-CTS trigger for

RSIP

Rate example improved for IRATE, CRATE, ERATE

commands

RSTP commands improved

1.15

03.05.2018

1.7.8

New LTU versions added:

•FG-PAM-SR4L-4Eth-RP,V98

•FG-PAM-SR4L-2V24/4Eth-RP,V98

1.16

30.08.2018

2.0.6

Traffic Encryption support, commands ENCODE and

STATUS ENCODE.

HTTPs support, commands SSL, TFTP CA|CERT|KEY,

HTTPS [ON|OFF]

SAFETY REGULATIONS

IF THE UNIT IS NOT USED IN ACCORDANCE TO REGULATIONS DESCRIBED AND DEFINED IN THE

CHAPTERS ”TECHNICAL DESCRIPTION” AND “TECHNICAL SPECIFICATIONS”, FLEXDSL

TELECOMMUNICATIONS AG REFUSES TO TAKE ANY RESPONSIBILITY. FURTHERMORE, NO

WARRANTY IS GRANTED IN SUCH CASE!

IT’S ONLY ALLOWED TO USE EXTERNAL POWER SUPPLYS THAT ARE APPROVED ACCORDING

TO THE SAFETY STANDARD IEC/EN 60950-1.

IT’S ONLY ALLOWED TO USE THE UNITS WITH HOUSINGS SUPPLYED FROM FLEXDSL

TELECOMMUNICATIONS AG (SUBRACKS, MINIRACK, UTTX). THE RACK MUST BE CONNECTED

PERMANENTLY TO RELIABLE PROTECTIVE EARTH CONDUCTOR. THE NTU UNIT MUST BE

CONNECTED PERMANENTLY TO RELIABLE PROTECTIVE EARTH CONDUCTOR: THE LTU UNIT

HAS TO BE FIXED TO THE RACK PERMANENTLY WITH THE TWO PANEL SCREWS.

INCORRECT USE OF THIS DEVICE, USE IN ANY OTHER ENVIRONMENT AND/OR HOUSING THAN

PROVIDED BY FLEXDSL MIGHT LEAD TO HARMFUL CONDITIONS. FAILURE TO FOLLOW THESE

PRECAUTIONS MAY RESULT IN DEATH, SEVERE INJURY OR PROPERTY DAMAGE.

User Manual LTU Orion 3

Please read this manual carefully before operating the system.

Installation of this equipment has to be done by qualified personnel only.

EU DIRECTIVE 2002/96/EC AND EN50419

Our equipment is marked with the recycling symbol. It means that at the end of

the life of the equipment you must dispose it separately at an appropriate

collection point and not place it in the normal domestic unsorted waste stream.

(European Union only)

User Manual LTU Orion 3

1 SELECTION GUIDE

Functionality

FlexDSL

Orion3 Models

Standalone

Rail Mounting

Subrack Module

Protected Housing

Single Pair

Dual Pair Bonding

Triple Pair Bonding

Quadruple Pair Bonding

Point-to-Point

Point-to-Multipoint

E1 (120Ohm)

E1 (75Ohm) optional

Ethernet Bridge

Ethernet Add/Drop

Nx64kbps Interface

E1 Cross Connect

Remote Power Receiver

Remote Power Source

Console Port Management

Telnet Management

Web Management

SNMP Management

FG-PAM-

SRL-2E1B/4Eth-RP, V90



FG-PAM-

SRL-2E1B/N64/4Eth-RP,V91



FG-PAM-

SR2L-4E1B/4Eth-RP,V93



FG-PAM-

SR2L-2E1B/N64/4Eth-RP,V94



FG-PAM-

SR4L-4E1B/4Eth-RP,V96



FG-PAM-

SR4L-4Eth,V98



FG-PAM-

SR4L-2N64/4Eth,V98



FG-PAM-

SR4L-4Eth-RP,V98



FG-PAM-

SR4L-2N64/4Eth-RP,V98



*1 Yes, if you use UTT1

*2 Not yet supported, future development

Attention: The models with Nx64 (N64) could be mounted with V.24 (V24), RS-485 (485), G.703 or E0 (703), or

4I4O or any other future interfaces

Other manuals for ORION 3

This manual suits for next models

Table of contents

Other FlexDSL Modem manuals

FlexDSL

FlexDSL Orion3 User manual

FlexDSL

FlexDSL Orion3 User manual

FlexDSL

FlexDSL MiniFlex SHDSL User manual

FlexDSL

FlexDSL ORION 2 User manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual