Firich Enterprise AerPOS AP-3435 User manual

Version-0.5

AP-3435

15” Bezel Fanless POS system

This document is copyrighted,

2012. All rights are reserved. Firich Enterprise Co., Ltd reserves

the right to make improvements of the product described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any form or by

any means without the prior written permission from Firich Enterprise Co., Ltd. Information

provided in this manual is intended to be accurate and reliable. However, Firich Enterprise Co.,

Ltd assumes no responsibility for its use, nor for any infringements upon the rights of third parties,

which may result from its use.

The material in this document is for product information only and is subject to change without

notice. While reasonable efforts have been made in the preparation of this document to assure its

accuracy, Firich Enterprise Co., Ltd, assumes no liabilities resulting from errors or omissions in

this document, or from the use of the information contained herein.

Record of Revision

Date Specs Ver.

Description Note

V0.1 Initial

V0.2 System Back Cover Installation Notice

2012/12/13

V0.3 Touch Utility Update Raydium

2013/05/11

V0.4 CashDrawer Provides Linux Sample code Vince

2013/06/26

V0.5 P-CAP touch updates Vince

Safety and Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray

detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the equipment and must be

easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from overheating.

DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the power

cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical shock.

13. Never open the equipment. For safety reasons, only qualified service personnel should open

the equipment.

14. If any of the following situations arises, get the equipment checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE

THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR A BOVE 60°C (140°F). IT MAY

DAMAGE THE EQUIPMENT.

Introduction 1

AerPOS ( AP-3435 ) Introduction.........................................................................................1

A Quick Tour for AP-3435....................................................................................................2

AP-3435 Dimension......................................................................................................3

Rear I/O Panel Connectivity.................................................................................................4

Aer POS AP-3435 Packing List............................................................................................4

Hardware Installation and Upgrading 5

2.5” Hard Disk Drive Installation...........................................................................................5

MSR / Finger Print Reciever / RFID / iButton Installation .....................................................6

COM Port Power Setting......................................................................................................7

Back Cover Installation Notice.............................................................................................8

Integrated VFD / LCM Installation........................................................................................9

Memory (DDRIII RAM) Installation.....................................................................................10

15” / 11.6” 2

Display Installation ......................................................................................11

15” 1

Touch Display Installation & Swapping ...................................................................12

OSD Function and Adjustment...........................................................................................13

Cash Drawer Installation....................................................................................................14

Software Installation and Setup 15

Please follow this installation sequence.............................................................................15

SMbus Driver Installation...................................................................................................16

SMbus Driver Installation for Windows XP..................................................................16

Chipset Driver Installation..................................................................................................18

Intel ATOM D525 Chipset Installation Utilities for Windows XP...................................18

VGA Driver Installation.......................................................................................................20

GMA3150 driver installation for Windows XP..............................................................20

LAN Driver Installation.......................................................................................................22

Realtek RT8111E LAN Driver Installation for Windows XP .........................................22

Audio Driver Installation.....................................................................................................24

Realtek ALC269 Audio Driver Installation for Windows XP .........................................24

FEC AUO Project–Capacitive Touch Utility........................................................................25

(Raydium controller) ..........................................................................................................25

EETI TouchKit Tools Installation........................................................................................34

EETI TouchKit Installation for Windows XP.................................................................34

EETI TouchKit Installation for Windows 7 ...................................................................37

TouchKit Control Panel......................................................................................................39

Wireless LAN Driver Installation.........................................................................................41

Wireless LAN Driver Installation for all Windows Operating Systems (Optional) .........41

Specifications 42

AP-3435 Specifications......................................................................................................42

Troubleshooting 43

Touch Panel Does Not Work.......................................................................................43

OSD Panel Cannot Work Precisely.............................................................................43

Cannot Detect SATA Storage HDD/SSD ....................................................................43

PS/2 Keyboard Is Not Functioning Normally...............................................................44

LAN Is Not Functioning Properly.................................................................................44

COM1 ~ COM5 Are Not Functioning Properly.............................................................44

Cash Drawer Port Is Not Functioning Properly............................................................44

AerPOS Series AP-3435

AerPOS ( AP-3435 ) Introduction

Bezel Free AerPOS series reaches design concept of the Total Cost Ownership and balance the

strong requirement for POS quality, AerPOS is implemented with Quality-Oriented, Space-

Effective, Fanless Energy Saving. AP-3435 also provides a decent choice for noise-free

environment applications with optimized product reliability.

Main Features:

•The high quality of resistive touch or durable tempered glass of projective capacitive

touch both are IP65 front panel compliant.

•Fanless solution for noise-free environment, mobile platform for green and energy

saving.

•Modularized Design and Easy Maintenance for system parts, such as SATA storage,

and RAM…etc.

•Various peripheral devices support and sufficient I/O connectivity requirements.

•Integrated VFD and the 2

15” / 11.6” LCD display.

AP-3435 with MCR

AerPOS Series AP-3435

A Quick Tour for AP-3435

15” Touch Display

Power Switch

HDD LED

USB Port

Display OSD

2.5” SATA Drive

Access

VFD / LCM

MSR

Finger Print Receiver

RFID

i-Button

Cable Access

11.6” / 15” 2

Display

Power Switch / Status

Blue LED: Power ON

Red LED: Power Off / Standby

HDD / SATA Status

Orange LED: Operation

AerPOS Series AP-3435

AP-3435 Dimension

D: 235mm

W: 240mm

H: 360mm

W: 370mm

AerPOS Series AP-3435

Rear I/O Panel Connectivity

Aer POS AP-3435 Packing List

I/O Port Connector Type Description

COM 1 D-sub 9 Serial port COM 1

DC IN DC IN connector Connect the 12V power adaptor to this port

DC out DC out connector 12V DC out put connect to 12V peripherals or devices

COM 4 RJ-45 Serial Port COM 4

USB A type USB Connect to standard A type USB devices

COM 2 D-sub 9 Serial port COM 2

VGA D-Sub 15 Connect 2

LCD screen or CRT monitors

LAN RJ-45 Connect to Ethernet

USB A type USB Connect to standard A type USB devices

LPT D-sub 25 Standard LPT (Parallel port) connector for printers or

KeyPro solution

PS/2 PS/2 connector Connect the keyboard or mouse to this port

Cash Drawer

RJ-11 Connect to 12V Cash Drawer

Line Out Earphone connector

Connect the speakers to this port

Optional IO ports are recommend to be pre-installed in FEC factory

COM 3 RJ-45 (optional) Serial Port COM 3

COM 5 RJ-45 (optional) Serial Port COM 5

Standard Optional & Peripherals

15” AP-3435 AerPOS Touch Terminal 1 COM 3 / COM 5 optional Com Port

12V 90W Power Adaptor 2 RJ-45 to D-sub9 Convert Cable

AC Power Cable 3 MSR / RFID / Finger Print Receiver

I-Button

4 20x2 VFD / 20x2 LCM / 240x64 LCM

5 15” / 11.6” 2

Display Bracket

6 Wireless Lan Module

COM 1

DC IN DC OUT

COM

USB COM 2

VGA

LAN

USB LPT

PS2 Cash Drawer

Line Out

COM 5

COM 3

AerPOS Series AP-3435

2.5” Hard Disk Drive Installation

1. Turn off power and remove power cord from the terminal

2. Unscrew the

maintenance door at the

front side of the terminal

body

3. Flip the maintenance

door and Extract 2.5”

SATA storage bracket

out

(no cable connected)

4. Place storage driver on

the bracket and fasten it

with 4 screws.

5. Restore the maintenance door to the system.

6. Fix the maintenance door with a screw.

7. Connect power cord to the system.

Do not remove the Display Module without switch off the terminal.

Power must be switched off and power cord must be unplugged. Every

time you service the system, please be aware of this.

2.5”

HDD

Other manuals for AerPOS AP-3435

Table of contents

Popular Touchscreen manuals by other brands

Elecro Engineering

Elecro Engineering Poolsmart Plus Installation & operating manual

Johnson Controls

Johnson Controls IQ4 HUB installation manual

Elo TouchSystems

Elo TouchSystems ET2270L user manual

Elo TouchSystems

Elo TouchSystems ET1002L user manual

Elo TouchSystems

Elo TouchSystems 3201L user manual

Duratec

Duratec S15 user manual

Crestron

Crestron TPMC-3SM quick start guide

Racelogic

Racelogic MFD Touch manual

J2 580 System manual

HAI

HAI OmniTouch 10p user manual

panel

panel PC PSR108-FM Series user manual

Tipro

Tipro FREE+ Getting started

Systemline

Systemline Commander installation guide

Interactive Technologies

Interactive Technologies Insite quick start

GVision

GVision Legacy installation guide

BeiJer

BeiJer T21C-C24 installation manual

Advantech

Advantech ITM-5117 Series user manual

Edge

Edge CS user guide