Finlux FXVT 60 User manual
OPERATING AND INSTALLATION INSTRUCTIONS
BUILT-IN VITROCERAMIC HOB
FXVT 60
2
DESCRIPTION OF THE HOB 3
SAFETY INSTRUCTIONS 4
INSTALLATON 6
Locati g Your Built-i Hob 6
Electrical Co ectio of Your Hob 8
USAGE 10
Tur O a d Tur Off The Applia ce 11
Select Heater 11
Tur o dual- a d triple zo es 12
Set Cooki g Level With a d Without Heat Boost 12
Tur Off I dividual Heaters 13
Timer Fu ctio 14
Key Lock 16
TOUCH CONTROL SAFETY FUNCTIONS 17
Se sor Safety Cut Off 17
Over Temperature Switch Off 17
Operati g Time Limitatio s 17
Residual Heat Fu ctio s 18
CLEANING AND CARE 19
.......................
......................................................
...........................................
............................................................................................
...............................................
............................................................
.................................................................................
..........................................................
............................................................
................................................................................
.........................................................................................
....................................................................
.....................................
...........................................................
........................................................
....................................................................
................................................................
...............................................................
..................................................................................
CONTENTS:
3
DESCRIPTION OF THE HOB
OVAL ZONE
HEATER
HOB
FRAME
VITROCERAMIC
SURFACE
TOUCH CONTROL
PANEL
SINGLE ZONE
HEATER
Dear Customer,
It is important that you should read this manual for best performance and
to extend the life of your appliance. We recommend you to keep this manual
for future reference.
Your ne hob is guaranteed and ill give lasting service. This guarantee
is only applicable if the appliance has been installed and operated in
accordance ith the operating and installation instructions detailed in this
manual.
Note: Appearance of your hob maybe different than the model sho n above
due to its configuration.
PART 2 SAFETY WARNINGS
4
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING YOUR
APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR APPLIANCE
MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY
ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES, WHILE YOU ARE READING THE
OPERATING MANUAL.
General Safety Warnings
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
- WARNING: The appliance and its accessible
parts become hot during use. Care should be
taken to avoid touching heating elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.
- WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in
fire. NEVER try to extinguish a fire with water,
but switch off the appliance and then cover
flame e.g. with a lid or a fire blanket.
- WARNING: Danger of fire: do not store items
on the cooking surfaces.
5
- WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock.
- For hobs incorporating a lid, any spillage
should be removed from the lid before opening.
And also the hob surface should be allowed to
cool before closing the lid.
- The appliance is not intended to be operated
by means of an external timer or separate
remote-control system.
- Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass and
other surface since they can scratch the surface,
which may result in shattering of the glass or
damage to the surface.
- Do not use steam cleaners for cleaning the
appliance.
- Your appliance is produced in accordance with all applicable local and international standards and
regulations.
- Maintenance and repair work must be made only by authorized service technicians. Installation and
repair work that is carried out by unauthorized technicians may endanger you. It is dangerous to alter or
modify the specifications of the appliance in any way.
- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure or
electricity voltage and frequency) and the requirements of the appliance are compatible. The
requirements for this appliance are stated on the label.
- CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic
household use only and should not be used for any other purpose or in any other application, such as
for non-domestic use or in a commercial environment or room heating.
- All possible security measures have been taken to ensure your safety. Since the glass may break, you
should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with
accessories.
- Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent
a hazard.
6
Installation Warnings
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorized technician and put into use. The producer is not
responsible for any damage that might be caused by defective placement and installation by
unauthorized people.
- When you unpack the appliance, make sure that it is not damaged during transportation. In case of
any defect; do not use the appliance and contact a qualified service agent immediately. As the
materials used for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to children,
they should be collected and removed immediately.
- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain,
snow etc.
- The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of min
100°C.
7KHWHPSHUDWXUHRIWKHERWWRPVXUIDFHRIWKHKREPLJKWULVHVGXULQJWKHRSHUDWLRQ7KHUHIRUHDERDUG
PXVWEHLQVWDOOHGXQGHUQHDWKWKHSURGXFW
During usage
- Do not put flammable or combustible materials, in or near the appliance when it is operating.
- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of
extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or frypan
with its cover in order to choke the flame that has occured in this case and turn the cooker off.
- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so
they cannot be knocked or grabbed.
- If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also
when you do not use the appliance, keep the gas valve off.
- Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.
During cleaning and maintenance
- Always turn the appliance off before operations such as cleaning or maintenance. You can do it after
plugging the appliance off or turning the main switches off.
- Do not remove the control knobs to clean the control panel.
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU
ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICE
AGENTS IN CASE OF NEED.
6
INSTALLATION
The electrical co ectio of this hob should be carried out by a
authorised service perso al or a qualified electricia , accordi g to the
i structio s i this guide a d i complia ce with the curre t regulatio s.
· Prior to installation, ensure that the local distribution conditions and the
adjustment of the appliance are compatible.
· The la s, ordinances, directives and standards in force in the country of
use are to be follo ed (safety regulations, proper recycling in accordance
ith the regulations, etc.)
Locati g your built-i hob
· After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorised service personal or a qualified
electrician immediately.
· This built-in hob is to be inserted into a cut out of a orktop. It ill be
electrically connected ith the s itch box belo , especially provided for this
purpose.
7
· Create an opening ith the dimensions sho n in the picture belo .
· Apply the one-sided self-adhesive sealing tape supplied all the ay round
the lo er edge of the cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it.
orktop mounting bracket
· Scre the 4 orktop mounting brackets on the side alls of product.
520mm
590mm
42mm
560mm
490mm
Min.
60mm
Min.
150mm
Min.
130mm
Min.
25mm
8
Electrical co ectio of your hob
· Before proceeding ith the electrical connection, verify that the current carrying
capacity of the system and the socket is adequate for the maximum po er rating of
the hob.
. Electrical installation of the residence and the electrical current plug in use must
be earthed and conform ith safety regulations.
· If there is no dedicated hob circuit and fused s itch, they must be installed by a
qualified electrician before the hob is connected.
· Fused s itch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms ith the requirements ofthe follo ing EEC Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio
interference,
2. EEC/89/109 relating to contact ith foods.
· A circuit breaker ith a contact opening of at least 3mm, rated 20A and delayed
functioning type must be installed inside the supply circuit.
9
· During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee ill not cover such
damages.
· All repairs must be carried out by an authorised service personal or a
qualified electrician.
· Unplug your appliance before each maintenance. For reconnection, follo
the connection diagrams strictly.
* This applia ce must be earthed.
* For this co etio a power lead
of wire type H05V V-F should be
used.
2
2
2
· For the touch controlled vitroceramic hob, the cable must be H05VV-F 3X2,5
mm² / 60227 IEC 53. You ill find the connection diagram sho n on the
bottom of your appliance.
Table of contents
Other Finlux Hob manuals
