Field Controls 46263400 Assembly instructions

Table of contents

Other Field Controls Fan manuals

Field Controls

Field Controls 46107700 User manual

Field Controls

Field Controls 46115300 User guide

Field Controls

Field Controls 46229000 User manual

Field Controls

Field Controls PVE-100 User manual

Field Controls

Field Controls 1977100 User manual

Field Controls

Field Controls 1536760 User manual

Field Controls

Field Controls 1977000 User manual

Field Controls

Field Controls PVO-600 User manual

Field Controls

Field Controls 46267300 User manual

Field Controls

Field Controls 46261700 Guide

Field Controls

Field Controls 27028 User manual

Field Controls

Field Controls 1984600 User manual

Field Controls

Field Controls Eliminator User manual

Field Controls

Field Controls 46357800 Assembly instructions

Field Controls

Field Controls 46068600 User manual

Field Controls

Field Controls PVG-100 User manual

Field Controls

Field Controls 46263300 User manual

Field Controls

Field Controls 46334800 User manual

Field Controls

Field Controls 46413900 User manual

Field Controls

Field Controls 4592700 User manual

Field Controls

Field Controls Eliminator EL-1 User manual

Field Controls

Field Controls CAC-120 User manual

Field Controls

Field Controls 46311800 User manual

Field Controls

Field Controls 46263500 Quick start guide

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

SPECIAL VENTING APPLICATION

INSTALLATION SHEET FOR

AQUAHUT® WATER HEATER ENCLOSURES

This sheet covers the requirements for installing the Star-Kap™ on an Aquahut®gas water heater

enclosure. The Aquahut®enclosure is designed for the purpose of housing agas water heater

outside of the living space of a structure. These requirements are based on the A.G.A. test reports

C-FT-5-90, C-FT-8-90, FT-C-12-93, FT-C-13-93, FT-C-14-92 and the SBCCI letter dated May 24,

1990. The Aquahut®water heater enclosure is not sold or manufactured by the Field Controls Co.

These installation instructions only address the installation of the Star-Kap™, state the maximum

capacity water heater allowed in an Aquahut®and the vent termination clearances from windows or

openings into a building structure as tested in the A.G.A. field reports C-FT-5-90, C-FT-8-90, FT-C-

12-93, FT-C-13-93, FT-C-14-92 and the SBCCI letter dated May 24, 1990.

INSTALLATION GUIDE LINES

1. The maximum gas water heater appliance to be operated in a Aquahut®enclosure: up to 90,000

BTU/HR input.

2. Two (2) make up/combustion air openings into the Aquahut®enclosure shall be installed. Each

opening size shall be based on one (1) square inch per 4000 BTU/HR. The vent termination shall

have the following clearance distances.

a. AH40 Model Aquahut®

14” from combustible exterior wall to center of vent cap

b. AH50 Model Aquahut®

16” from combustible exterior wall to center of vent cap

c. A minimum of 12” from any window or opening into the main building structure

d. A minimum of 18” below an eave or overhang

STAR-KAP™ INSTALLATION

1. Before installation, apply two (2) beads of high

temperature silicone sealant or equivalent around

the bottom of the storm collar and one (1) inch

above the end of the Star-Kap™ body. (See

Figure 1)

2. Insert the Star-Kap™ into the inside of the single

wall vent pipe, making sure the Star-Kap™ is

seated against the storm collar. Fasten the Star-

Kap™ to the single wall vent pipe, by using

three (3) sheet metal screws. Placement of the

screws should be approximately 1/2 inch from

the end of the single wall vent pipe. The heads

of the screws should be covered with high

temperature silicone or equivalent.

Figure 1

P/N 46263400 Rev D 11/00