Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE User manual

www.eldcontrols.com

Please retain these instructions after installation.

This device MUST be installed by a qualied agency in accordance with the manufacturer's installation instructions. The denition of

a qualied agency is: any individual, rm, corporation or company which either in person or through a representative is engaged

in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the

precautions required, and has complied with all the requirements of the authority having jurisdiction.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By: Phone:

FIELD DIRECT VENT SYSTEM

REDUCING TEE

Model: FDVS WITH REDUCING TEE

page 2

Figure 1

Figure 2

REDUCING TEE INSTALLATION

1. Apply a bead of sealant to appliance collar

approximately 1" from end of collar.

(See Figure 1)

2. Remove all oil and grease from the inside of the

appliance reducing tee and apply a bead of

sealant to inside of reducing tee 1⁄2" from end.

(See Figure 1)

3. With a twisting motion, assemble the reducing

tee rmly onto the appliance collar.

4. Push the reducing tee onto the appliance collar,

using care to avoid damaging the appliance

collar or the reducing tee. (See Figure 2)

5. Assemble clamp halves using the supplied 5⁄16"

bolts and square nuts, and install the appliance

clamp onto the reducing tee and tighten

securely. (See Figure 1)

6. Install the supplied self-drilling, self-tapping

anchoring screws through the 4 holes in the

appliance clamp into the appliance collar.

(See Figure 2) No pilot hole is required.

7. Apply sealant to the end of the reducing tee

and anchoring screws. (See Figure 2)

8. After testing and burner adjustments have

been made, apply sealant to the supplied 3⁄8"

sampling port plug screw and install the screw

in the sampling port. (See Figure 2)

page 3

JOINT ASSEMBLY: VENT PIPE TO TERMINATION AND

REDUCING TEE

If necessary, the vent pipe may be cut to length with a

hacksaw or cut o saw.

CAUTION: Use safety glasses and other appropriate

safety gear.

1. Pull outer vent pipe back 1-2" from inner vent

pipe end and remove insulation. (See Figure 3)

2. Slide cover sleeve onto end of vent pipe a few

inches back from end of outer vent pipe.

(See Figure 3)

3. Slide cover ring over stop bead on termination

inner pipe. (See Figure 3)

4. Assemble inner pipe clamp halves using the

supplied 1⁄4" bolts and square nuts, and position

inner pipe clamp 1⁄4" from end of inner pipe.

(See Figure 3)

5. Remove all oil and grease from end of termination

inner pipe and apply a bead of sealant between

the stop bead and retainer bead. (See Figure 4)

6. Apply a thick bead of sealant to inside of inner

vent pipe 1⁄2" from the end of pipe, working the

sealant into the corrugations. (See Figure 4)

7. Push the inner vent pipe onto the termination inner

pipe all the way up to the stop bead.

8. Tighten the inner pipe clamp bolts until both

clamp halves are within 1⁄8" of each other at each

end. (See Figure 5)

9. Slide the cover sleeve and cover ring together to

engage the ring in the groove of the sleeve and

tighten the cover sleeve clamp. (See Figure 6)

10. Repeat this procedure to install vent pipe on

reducing tee.

11. To maintain 1" clearance to combustibles, wrap

minimum 11⁄2" thick ceramic insulation (installer-

supplied) around the exposed portion of the

termination inner pipe (See Figure 6), and secure

with foil tape (installer supplied).

Figure 6

Figure 5

Figure 4

Figure 3

Phone: 252.522.3031 • Fax: 252.522.0214

www.fieldcontrols.com

Warranty

For warranty information about this or any Field Controls product, visit:

www.eldcontrols.com/warranty

Table of contents

Other Field Controls Fan manuals

Field Controls

Field Controls PVO-600 User manual

Field Controls

Field Controls 46229000 User manual

Field Controls

Field Controls ventCool User manual

Field Controls

Field Controls FAPV180-AC User manual

Field Controls

Field Controls SWG Stainless Series User manual

Field Controls

Field Controls 46263500 Quick start guide

Field Controls

Field Controls 46011100 User manual

Field Controls

Field Controls AB-1 User manual

Field Controls

Field Controls 46413900 User manual

Field Controls

Field Controls 1536760 User manual

Field Controls

Field Controls CAC-120 User manual

Field Controls

Field Controls 2702600 User manual

Field Controls

Field Controls 46263400 Assembly instructions

Field Controls

Field Controls 46139100 User manual

Field Controls

Field Controls 46200000 User manual

Field Controls

Field Controls 46334200 User manual

Field Controls

Field Controls 46267300 User manual

Field Controls

Field Controls 46233500 Guide

Field Controls

Field Controls 46330800 User manual

Field Controls

Field Controls 575300 User manual

Field Controls

Field Controls 46334800 User manual

Field Controls

Field Controls Eliminator EL-1 User manual

Field Controls

Field Controls SWG-AF Series User manual

Field Controls

Field Controls 46371700 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual