Ferguson Smart Wifi Plug User manual

User manual

English

SAFETY MEASURES

We request that you read the instruction manual and recommendations set forward therein.

Also remember to correctly position the satellite antenna!

In order to avoid an electric shock, never open the housing. amage to the

warranty seal shall void the warranty.

isconnect the device from the mains during thunderstorms or when it is not to

be used for an extended period of time. Please remember that the warranty does

not cover damage to the equipment caused by a lightning strike.

o not expose the device to direct sunlight. Place it away from sources of heat

and humidity. o not cover ventilation ducts, in order to ensure the correct

circulation of air.

Place the device horizontally on a flat, even and stable surface.

If you move the device from a room that is warm to one that is cold (or vice

versa), wait at min. 1 hour before connecting it to the mains. Otherwise,

problems may arise.

The device should be placed away from vases, bottles, aquariums and other

water containers in order to avoid damage. o not touch the mains plug with your

bare hands.

o not place any objects on the housing of the device. This may cause

overheating and reception problems.

Before commencing maintenance or installation work, disconnect the device from the mains.

o not clean the device with alcohol or liquids containing ammonia. If necessary, clean it with a

soft, lint-free cloth wetted with a gentle solution of water and soap.

o not connect any cables when the mains plug is in the socket.

Check the condition of your cables. amaged cables may cause a fire.

Please disconnect the device from the mains before connecting any cables.

DOWNLOADABLE SOFTWARE

Ferguson has taken every effort to provide users with software updates in order to ensure that

the parameters of the device are up to date. Ferguson reserves itself the right to amend,

change or modify the software used in the satellite television device as it shall choose and

without prior notification. The latest version of the software is available on the website

http://www.ferguson-digital.eu

ABOUT THE INSTRUCTION MANUAL

Ferguson Sp. z o.o. has made every effort to provide the most current information about its

products. Ferguson Sp. z o.o. does not grant any guarantee as to the contents of the present

instruction manual and disclaims any implied guarantees concerning market value or suitability

for specific purposes. The information contained herein is an instruction intended to enable the

correct usage and maintenance of the device.

Ferguson Sp. z o.o. reserves itself the right to introduce amendments, changes or translations

of the instruction manual without prior notification thereof. For this reason, we recommend you

regularly visit our website in order to obtain the latest information.

MARKINGS AND SIGNS APPLIED TO THE device

CE logo.

The logo informs that the device conforms

to the terms and conditions of irective

2004/108/EC concerning observance by

Member States of provisions regulating

electromagnetic compatibility, and to the

terms and conditions of irectives

2006/95/EC concerning observance by

Member States of provisions regulating low

voltage electricity and safety with relation

to the handling and operation of electrical

equipment.

Risk of electric shock - do not open.

This notice warns the user not to open

the device housing. The housing may

be opened solely by authorized service

technicians.

When this crossed-out wheeled bin

symbol is attached to a product it

means that the product is covered by

the European irective 2002/96/EC.

Please inform yourself about the local

separate collection system for electrical

and electronic products.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

Correct disposal of your old product

helps to prevent potential negative

consequences for the environment and

human health.

R&TTE Hereby Ferguson Sp. z o.o., declares

that the device is in compliance with

the essential requirements and other

relevant provisions of irective 1999/5/EC.

You can find the eclaration of Conformity

on www.deklaracje.ferguson.pl

This product has been designed, tested

and

manufactured according the European

R&TTE directive 1999/5/EC.

ouble insulation logo.

This logo informs that the device is an

electrically safe device, provided that it is

used in accordance with the

recommendations set forward in the

chapter concerning safety.

Your product contains batteries covered

by the European irective 2006/66/EC,

which cannot be disposed with normal

household waste. Please inform yourself

about the local rules on separate

collection of batteries because correct

disposal helps to prevent negative

consequences for the environmental

and human health.

Hot surface mark

CAUTION: HOT SURFACE. O NOT TOUCH.

The top surface over the internal heat sink

may become hot when operating this

product continuously. o not touch hot

areas, especially around the “Hot surface

mark” and the top panel.

Your product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused.

When this logo is attached to a product, it

means a financial contribution has been

paid to the associated national recovery

and recycling system.

BASIC INFORMATION

The smart controlled WiFi plug is designed with the latest advanced WiFi technology. The WiFi

plug is an APP controlled device combing with WiFi connection, mobile phone (or tablet) or a

server. This device could be controlled via an APP installed in an Android & IOS smart phones or

tablets. The APP apply WiFi and Cellular mobile network signal to connect the device, then user

can setup the APP to intelligently implement local or remote turn ON/OFF control.

Users could turn on and turn off electricity directly, or indirectly by setting multi-timer at

anytime and anywhere, to greatly save their time.

Wiring di gr m

Di gr m of Equipment connection

NOTE:

Please keep in mind that new software may change the functionality of the device.

Photographs and descriptions included in the instruction manual are for informational

purposes only. If you should notice an error, please report it - we shall make every

effort to have it rectified.

Appe r nce

Function Det ils

1 Wifi indicator 1. LE blinks when WiFi connected successfully.

2. LE flash rapidly when WiFi connection failed or connected

abnormal.

2 Manual control

button

1.In need to manually power control, once clicking the button to turn

on, twice to button off.

2.To reset factory default, press the button about 5 seconds till LE

flash rapidly.

3.When power turn on, LE turn on, power turn off, LE turn off too.

4.To AP mode, press the button about 10 seconds till LE flash quickly

become slow flash.

3 Plug output Standard EU output plug

4 Plug input Standard EU input plug

Quick Inst ll Guide

Below Hardware devices are necessary before configuration

1) Properly work WiFi router.

2) APP devices like mobile phone, tablet etc(Android and IOS).

Configur tions steps

Step 1.

Search the Apple App Store or Google Play for “WeConn”.

You can use the direct links to the application.

For this purpose scan, one of the following QR codes.

ownload and install the app.

Step 2.

Check if app device(mobile phone or tablet) is normally connected to the WiFi router which need

to be configured. There are kinds interface and functions for kinds app devices, no detail

description here.

Both client and AP mode is available for this iFi plug, below is detail operation.

Step 3. Client mode

Restore WiFi plug's factory defaults firstly: insert the WiFi plug in outlet, when blue indicator

start to flash normally, press the button on WiFi plug for about 5 seconds, then red indicator

blink rapidly, release the button finish client mode configuration.

Step 4. Adding new device

1. Input WiFi SSI

2. Input WiFi Password

3. Start configuration

"on-site" indicates the current status of the LAN

1. Control key

2. Edit device name

3. Lock: When set to lock only administrator control,

when set as unlock, related members also could

control.

4. Refresh data

Step 5.Configur tion of ch nge Loc l network to

remote control

When the mobile phone or tablet and WiFi plug is in

different network, the APP interface will automatically

display "out-site" instead of "on-site".

This process to find and switch need some time.

Remote control condition

The number of personnel allowed to control

The current online personnel number

Historical records

Step 6. AP mode

Press the button for about 10 seconds, until LE flash

slowly from quickly, then release the button, now WiFi

plug work as AP mode.

Step 7.Connect the AP mode oper tion method

Scan and connect the WiFi plug SSI in smartphone or tablet. The plug SSI comes with

"WeConn"& plug Mac address. (for example, WiFi SSI : WeConn7cadd90659033), Click

connect, when interface shows “connected” exit setup interface. Now turn on WeConn app. All

operations remain same.

AP mode means direct connection(which is wireless remote control, not control through

internet), under AP mode. Remote control is unavailable and distance can be controlled is

limited.

Remarkscheck following points if connection failed

1) check if IP address of the WiFi router is full or not, see how many devices have connected to

WiFi router already, or setup WiFi router' s connect website based on user manual, or contact

WiFi router' s distributor, after-sales service, manufacturer etc.

2) Check if WiFi router is normally working, and it's internet speed situation

3) Check if distance too long so signal too weak to connect

4) Check if APP device have connected to the configuration WiFi router normally

5) Pull WiFi plug out, 5 seconds later, insert it in outlet and configuration, reset to factory

default again.

6) Convert AP mode to client mode, only need to reset WiFi plug to factory default, then

connection it to WiFi router and configuration again.

APP control reset nd delete oper tions WiFi plug

On device list choose “on-site” (online) device press and hold

2 seconds to see reset device info.

On device list choose “out-site” (offline) device press and hold

2 seconds to see delete device info.

Control permissions settings

1. evice name

2. Mac address

3. The blue list represents your own APP device.

4. The black list represents APP devices form other

5. You’re able to set as administrator (Remarks only

one administrator for each WiFi Plug)

Specific tion

Protocol and plug Standard

Wireless Standard IEEE802.11b/g/n

Operation Frequency ISM band, 2412~2483.5MHz ( epends on country region)

Security Mac Encryption; 62/128/152 bit WEP, WPA-PSK, WPA2-PSK, WEP, TKIP

Power Parameters

Operating Voltage AC96V~264V(60Hz/50Hz)

Output Power MAX 3500W

Plug mating cycles > 5000

Table of contents

Other Ferguson Accessories manuals

Ferguson

Ferguson FS2CO User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual