Fein KBE 35 N24 Setup guide
KBE 35 N24; Holemaker III
Repair Instructions
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 1of 61
KBE 35 N24; Holemaker III
Contents
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 2of 61
1. Models described
2. Technical data
3. Notes and requirements
4. Tools required
5. Lubricants and auxiliary substances required
6. Removal
7. Fitting
8. Connection diagram
KBE 35 N24; Holemaker III
1. Models described
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 3of 61
These repair instructions describe how to repair the following models:
Model
Order number
KBE 35 N24
7 270 59 .. .. .
Holemaker III
7 270 59 .. .. .
KBE 35 N24; Holemaker III
2. Technical data
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 4of 61
Technical data
All the technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com
KBE 35 N24; Holemaker III
3. Notes and requirements
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 5of 61
Please note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts.
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act [ProdSG] applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed.
KBE 35 N24; Holemaker III
4. Tools required
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 6of 61
Standardwerkzeuge
Plastic hammer
Sleeve
•Ø inside 44 mm
Ø outside 55 mm
•Ø inside 39 mm
Ø outside 46 mm
•Ø inside 17 mm
Ø outside 25 mm
•Ø inside 16 mm
Ø outside 25 mm
•Ø inside 26 mm
Ø outside 42 mm
•Ø inside 7 mm
Ø outside 18 mm
•Ø inside 5 mm
Ø outside 15 mm
•Ø inside 10 mm
Ø outside 24 mm
•Ø inside 5 mm
Ø outside 16 mm
•Ø inside 7 mm
Ø outside 18 mm
•Ø inside 10 mm
Ø outside 23 mm
•Ø inside 13 mm
Ø outside 26 mm
•Ø inside 7 mm
Ø outside 13 mm
•Ø inside 26 mm
Ø outside 30 mm
Cross-head screwdriver
Slotted screwdriver
Torx screwdriver
T15; T20
Arbor press
Circlip pliers
Socket head wrench-set
KBE 35 N24; Holemaker III
4. Tools required
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 7of 61
Special tools
Drawing-off socket cap
Assembly aid
Chuck cone 26 mm
Chuck cone 24 mm
Chuck cone 19 mm
KBE 35 N24; Holemaker III
5. Lubricants and auxiliary substances required
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 8of 61
Lubricants
Grease
0 40 128 03 00 0
35 g
Getriebe
KBE 35 N24; Holemaker III
6. Disassembly
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 9of 61
Removing the container
NOTE:
Fluid may be present in the container.
Drain the container (2) before removal.
1. Remove the hose (1) from the hose socket.
2. Remove the container (2).
1
2
KBE 35 N24; Holemaker III
6. Disassembly
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 10 of 61
Removing the electronics
1. Unscrew the six screws (1).
2. Remove the holder (2).
3. Remove the cover (3).
4. Disconnect all the connectors (4).
5. Unscrew the screw (5).
6. Unscrew the screw (6).
7. Remove the cable clamping piece (7).
Tools:
- Torx T20
1
3
2
4
5
7
6
Abbildung ähnlich
This manual suits for next models
1
Table of contents
Other Fein Drill manuals
Fein
Fein ASCT18 User manual
Fein
Fein DSk 658 User manual
Fein
Fein WBP10 Series Setup guide
Fein
Fein Slugger JMU 137 QW Series User manual
Fein
Fein ASCM12 User manual
Fein
Fein ASzx 648 User manual
Fein
Fein KBU 110-4 M Setup guide
Fein
Fein ASCM14 User manual
Fein
Fein Slugger HoleMaker III User manual
Fein
Fein Slugger JMC MAGFORCE 90 User manual
Fein
Fein KBB 40 Series User manual
Fein
Fein GWP10 Setup guide
Fein
Fein ABS 14 Setup guide
Fein
Fein ABS18 Q User manual
Fein
Fein Slugger JMU 404 M User manual
Fein
Fein KBU 35 Q User manual
Fein
Fein ABS 18 User manual
Fein
Fein HandyMaster ASB 18V Quick start guide
Fein
Fein ASCD18W2 User manual
Fein
Fein Handy Master ABS9 User manual
