Fantom Drives DataShield Pro User manual
USER MANUAL
Designed, Engineered and Assembled in the United States.
www.fantomdrives.com
Since 1988, our team is committed to providing reliable data
storage and superior customer service. If you are happy with
our product, please consider writing us a product review
where you have purchased the DataShield Pro. If you are
unsatised with our product or need support, please do not
hesitate to contact us so we can take care of you. You can reach us at
1-800-800-DISK (M-F from 9:00 am - 3:00 pm PST) or email us at
The DataShield Pro encrypts all of your data and keeps it safe
from unauthorized access even if the hard drive is removed
from its housing. This unit is fully usb-powered and ideal for
personal or business use where data privacy is required.
1
What’s Included:
USB type A
to Micro B
USB type C
to Micro B
Fantom Drives
DataShield Pro
Instruction
Manual
USER MANUAL
Key
(#) Key
Press to conrm
your passcode
(*) Key
Clear entire input
sequence and start
from the beginning
Red LED
Device is locked/
Light blinks twice if
the wrong passcode
is entered
Green LED
Power indicator
and disk activity
Orange LED
Passcode set
up mode
Blue LED
Device is unlocked/
Light blinks after a
key is pressed
Product Specications
2
Interface USB 3.2 Gen 1 - 5 Gbps
Portable 4.75” x 3.08” x 0.75”
Capacity 500GB to 2TB (HDD)
256GB to 4TB (SSD)
What’s Included USB micro B to A
USB micro B to C cables
Power No Power Supply Needed
First Time Set Up
Step 1: Conguring Your (DEK) Data Encryption Key
1. Press and hold down numbers 1 and 3 while simultaneously
connecting the USB cable to your computer or laptop.
2. The red and green LED lights will turn on after 5 seconds,
then release both buttons. Sequence is as follows:
Step 2: Choosing Your Passcode
1. Enter your desired passcode (0 -12 digits) followed by (#)
to save. Both the blue and orange lights will turn off after
successfully setting your passcode.
TIP: Failure to press buttons 1 and 3 simultaneously before connecting
to the computer will result in incomplete DEK set up. If so disconnect the
enclosure and complete steps 1-3 again.
2. Re-enter your passcode and press (#) to conrm.
3. The blue light will turn on to conrm that your passcode has
been successfully set up.
Green light only After 5 seconds, red and green lights
3
3. Press and hold (*) for 5 seconds, the orange LED light will
turn on. If the orange LED light does not turn on, it means
conguration mode was unsuccessful.
2. Locate your DataShield Pro drive in the list. It will show as
“Not Initialized”
3. Right click on the disk and initialize
4. Make sure your disk is selected and use GPT option
4
Step 3: Initialization and Formatting
A) Instructions for use with Windows 10, Windows 8, Windows 7,
and Windows Vista (for Mac see pg. 6)
1. On your taskbar, right click on the Windows icon and select
“Disk Management”
5. Right click the disk and select “New Simple Volume”
6. Select default settings, assign a volume label and click “Next”
7. Your drive is now ready to use.
5
B) Instructions for use with Mac OSX
1. Open Utilities, then Disk Utility
2. Select the disk and click the erase tab
*Warning: This will delete all your current data in the drive!
3. Select Mac OS Extended (Journaled) and click “Erase”
4. Your drive is now ready to use
6
Connecting the Drive
1. Connect the drive to the computer and wait until both red
and green LED lights are turned on
2. Enter your passcode and press (#)
3. The red LED light will turn off and the blue LED light will
turn on — The device is now unlocked.
LOCKED UNLOCKED
Operation Guide
Changing Your Passcode
1. Press and hold down (*) for 5 seconds while simultaneously
connecting the USB cable to your computer or laptop. The
red, green, and orange LED lights will turn on. Then release
the (*) button.
2. Input your current passcode and press (#). The blue LED light
will blink and turn off together with the orange LED light.
3. Enter your new passcode and press (#).
4. Enter your new passcode again and press (#). The red LED
light turns off and blue LED light turns on. Your device is
now unlocked.
7
Frequently Asked Questions
Q. Can I access the date if I forget the passcode?
A. No, you cannot access your encrypted data if you forget
your passcode.
Q. Can I still use the DataShield Pro if I forget the passcode?
A. Yes, you can continue using the device by resetting DEK. However,
all data will be lost. (See First Time Set Up)
Q. Does Datashield Pro provide defense against brute force attack?
A. Yes, after 20 failed passcode entries the Datashield Pro will
self-destruct. Data encryption key is deleted and data cannot
be recovered.
Table of contents
Other Fantom Drives Storage manuals
Fantom Drives
Fantom Drives MDU1000 Instruction Manual
Fantom Drives
Fantom Drives GD1000EU Instruction Manual
Fantom Drives
Fantom Drives Gforce 3 User manual
Fantom Drives
Fantom Drives GreenDrive Instruction Manual
Fantom Drives
Fantom Drives GF1000EU Instruction Manual
Fantom Drives
Fantom Drives eXtreme Thunderbolt 3 User manual
Fantom Drives
Fantom Drives GreenDrive Quad Instruction Manual
Fantom Drives
Fantom Drives G-Force Megadisk Instruction Manual
Fantom Drives
Fantom Drives MGD-16FC16A User manual
Fantom Drives
Fantom Drives Black Diamond Instruction Manual
Fantom Drives
Fantom Drives GD1000EU User manual
Fantom Drives
Fantom Drives MGT-08SC08A Installation and operating manual
Fantom Drives
Fantom Drives MTT160 Instruction Manual
Fantom Drives
Fantom Drives MXNAS2500 User manual
Fantom Drives
Fantom Drives Gforce 3 Instruction Manual
Fantom Drives
Fantom Drives GF1000EU Instruction Manual
Fantom Drives
Fantom Drives MDE4000 Instruction Manual
Fantom Drives
Fantom Drives G-Force Megadisk Instruction Manual
Fantom Drives
Fantom Drives DataDock II User manual
Fantom Drives
Fantom Drives TFD1000U16 Instruction Manual
