FAAC 750 Standard User manual
750
Leggere completamente questo manuale di istruzioni prima di iniziare l’installazione del prodotto.
Il simbolo evidenzia le note importanti per la sicurezza delle persone e l’integrità dell’automazione.
Il simbolo richiama l’attenzione sulle note riguardanti le caratteristiche od il funzionamento del prodotto.
Read this instruction manual to the letter before you begin to install the product.
Symbol highlights notes that are important for people’s safety and for the good condition of the automated
system.
Symbol draws your attention to the notes about the product’s characteristics or operation.
Lire ce manuel d’instructions dans son entier avant de commencer l’installation du produit.
Le symbole met en évidence les remarques pour la sécurité des personnes et le parfait état de l’automatisme.
Le symbole attire l’attention sur les remarques concernant les caractéristiques ou le fonctionnement du produit.
Vor der Installation des Produkts sind die Anweisungen vollständig zu lesen.
Mit dem Symbol sind wichtige Anmerkungen für die Sicherheit der Personen und den störungsfreien Betrieb der
Automation gekennzeichnet.
Mit dem Symbol wird auf Anmerkungen zu den Eigenschaften oder dem Betrieb des Produkts verwiesen.
Lean completamente este manual de instrucciones antes de empezar la instalación del producto.
El símbolo identifica notas importantes para la seguridad de las personas y para la integridad del automatismo.
El símbolo llama la atención sobre las notas relativas a las características o al funcionamiento del producto.
Lees deze instructiehandleiding helemaal door alvorens het product te installeren.
Het symbool is een aanduiding van opmerkingen die belangrijk zijn voor de veiligheid van personen en voor een
goede automatische werking.
Het symbool vestigt de aandacht op opmerkingen over de eigenschappen of de werking van het product.
Inserto Immagini - Pictures Collection
Collection de Figure - Cojunto de Imagenes
Photo Kollektion - Fotoverzameling
2
1
5
4
3
200
152 ÷ 175
400
124
5
6
5
7
7
6
1
2
3
4
~ 270
~ 224
~470
5
min. 60
5124
152÷175
(100)
(270)
250
450
470
90°
6/a
min. 60
5124
152÷175
(100)
(270)
250
450
470
90°
6/b
ø 32 mm
7 8
min. 1550 ÷ max. 2840
9 10
245,6
353
65
141,5
80,5
11
ø 5
12
255
362
max. 65
13
ø 30
14
min. 100
15 16
C
A
B
D
CLOSE
OPEN
INT.
EXT.
17 18
19
MAX.
MIN.
20
1
2
21 22
min 250
23 24/a
24/b 25
26/a 26/b
27 28
29
1
ENGLISH
Notes on reading the instructions
Read this instruction manual to the letter before you begin to install the product.
Symbol highlights notes that are important for people’s safety and for the good condition of the automated system.
Symbol draws your attention to the notes about the product’s characteristics or operation.
INDEX
CE DECLARATION OF CONFORMITY FOR MACHINES .......................................................................................................... 2
WARNINGS FOR THE INSTALLER........................................................................................................................................... 2
1 DESCRIPTION AND TECHNICAL SPECIFICATIONS.............................................................................................................. 3
2. INSTALLING THE AUTOMATED SYSTEM.............................................................................................................................. 3
2.1. PRELIMINARY CHECKS............................................................................................................................................ 3
2.2. INSTALLING THE JACK ............................................................................................................................................. 3
2.3. INSTALLING THE HYDRAULIC CONTROL UNIT ........................................................................................................... 4
2.4. HYDRAULIC CONNECTION ...................................................................................................................................... 4
2.5. AIR BLEED OPERATIONS .......................................................................................................................................... 4
2.6. INSTALLING THE GATE ............................................................................................................................................. 5
3. OPERATION ..................................................................................................................................................................... 5
3.1. CHECKING THE SENSE OF ROTATION....................................................................................................................... 5
3.2. SETTING OPERATION TIME ....................................................................................................................................... 5
3.3. SETTING THE ANTI-CRUSHING SYSTEM..................................................................................................................... 5
4. TESTING THE AUTOMATED SYSTEM................................................................................................................................... 5
5. MANUAL OPERATION....................................................................................................................................................... 5
6. MAINTENANCE ................................................................................................................................................................ 5
2
ENGLISH
1) ATTENTION! To ensure the safety of people, it is important that you read
all the following instructions. Incorrect installation or incorrect use of
the product could cause serious harm to people.
2) Carefully read the instructions before beginning to install the product.
3) Do not leave packing materials (plastic, polystyrene, etc.) within reach
of children as such materials are potential sources of danger.
4) Store these instructions for future reference.
5) This product was designed and built strictly for the use indicated in this
documentation. Any other use, not expressly indicated here, could
compromise the good condition/operation of the product and/or be
a source of danger.
6) FAAC declines all liability caused by improper use or use other than that
for which the automated system was intended.
7) Do not install the equipment in an explosive atmosphere: the presence
of inflammable gas or fumes is a serious danger to safety.
8) The mechanical parts must conform to the provisions of Standards EN
12604 and EN 12605.
For non-EUcountries,toobtainanadequatelevelof safety,theStandards
mentioned above must be observed, in addition to national legal
regulations.
9) FAAC is not responsible for failure to observe Good Technique in
the construction of the closing elements to be motorised, or for any
deformation that may occur during use.
10) The installation must conform to Standards EN 12453 and EN 12445.
For non-EUcountries,toobtainanadequatelevelof safety,theStandards
mentioned above must be observed, in addition to national legal
regulations.
11) Before attempting any job on the system, cut out electrical power.
12) The mains power supply of the automated system must be fitted with an
all-pole switch with contact opening distance of 3 mm or greater. Use
of a 6A thermal breaker with all-pole circuit break is recommended.
13) Make sure that a differential switch with threshold of 0.03 A is fitted
upstream of the system.
14) Make surethattheearthingsystemisperfectlyconstructedandconnect
metal parts of the closure to it.
15) The automated system is supplied with an intrinsic anti-crushing safety
deviceconsistingofatorquecontrol.Nevertheless, itstrippingthreshold
must be checked as specified in the Standards indicated at point
10.
16) The safety devices (EN 12978 standard) protect any danger areas
against mechanical movement Risks, such as crushing, dragging, and
shearing.
17) Use of at least one indicator-light (e.g. FAACLIGHT ) is recommended
for every system, as well as a warning sign adequately secured to the
frame structure, in addition to the devices mentioned at point “16”.
18) FAAC declines all liability as concerns safety and efficient operation of
the automated system, if system components not produced by FAAC
are used.
19) For maintenance, strictly use original parts by FAAC.
20) Do not in any way modify the components of the automated
system.
21) The installer shall supply all information concerning manual operation
of the system in case of an emergency and shall hand over to the user
the warnings handbook supplied with the product.
22) Do not allow children or adults to stay near the product while it is
operating.
23) Keep radio controls or other pulse generators away from children, to
prevent the automated system from being activated involuntarily.
24) Transit is permitted only when the automated system is idle.
25) The user must not attempt any kind of repair or direct action whatever
and contact qualified personnel only.
26) Check at least every 6 months the efficiency of the system, particularly
the efficiency of the safety devices (including, where foreseen, the
operator thrust force) and of the release devices.
27) Anything not expressly specified in these instructions is not
permitted.
WARNINGS FOR THE INSTALLER
GENERAL SAFETY OBLIGATIONS
CE DECLARATION OF CONFORMITY FOR MACHINES
(DIRECTIVE 2006/42/EC)
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
Declares that: Operator mod. 750
is built to be integrated into a machine or to be assembled with other machinery to create a machine under
the provisions of Directive 2006/42/EC
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
and also declares that it is prohibited to put into service the machinery until the machine in which it will be
integrated or of which it will become a component has been identified and declared as conforming to the
conditions of Directive 2006/42/EEC and subsequent amendments.
Bologna, 01-07-2009
The Managing Director
A. Marcellan
Other manuals for 750 Standard
3
This manual suits for next models
3
Table of contents
Other FAAC Door Opening System manuals
Popular Door Opening System manuals by other brands
Normstahl
Normstahl IDO7 installation manual
Häfele
Häfele Finetta T 70 VF manual
AGS
AGS D-PL Instructions for fitting, operating and maintenance
Stanley
Stanley MA900ñ Installation and owner's manual
WITTUR
WITTUR Hydra Plus UD300 Instruction handbook
Alutech
Alutech TR-3019-230E-ICU Assembly and operation manual