Ezviz CSW2DAPC User manual
Scan the QR code with the EZVIZ App
to add the device to your account.
Please keep it for further reference.
102024182, B
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user
manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated,
or distributed, partially or wholly, by any means, without the prior written permission of
EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the ™ website
(http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS
AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S
TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE
PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION
CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE
PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF
OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S
PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL
BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE
CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT
IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ
SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this product
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between
the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
SAVE THIS MANUAL FOR FUTURE REFERENCE
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards
listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product
contains a battery that cannot be disposed of as unsorted municipal waste
in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection
point. For more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-W2D] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
CAUTION: THE BLUE LIGHT DAMAGE OF THIS PRODUCT TO THE EYES IS CLASSIFIED AS
CATEGORY 1. DO NOT OBSERVE THE LIGHT IN SHORT DISTANCE. DO NOT TURN ON THE LIGHT
DURING ASSEMBLY, INSTALLATION AND MAINTENANCE, IF MUST, PLEASE FULLY PROTECT
EYES BY WEARING PROTECTIVE EYEWEAR.
GENERAL: All ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND
NATIONAL ELECTRICAL CODE (N.E.C) STANDARDS. IF YOU ARE UNFAMILIAR WITH PROPER
ELECTRICAL WIRING CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.
WARNING-TO HELP PREVENT THE POSSIBILITY OF ELECTRICAL SHOCK, THE USE OF RUBBER
SOLE SHOES IS RECOMMENDED. EXERCISE CARE, UDE WORK GLOVES WHEN HANDLING THE
FIXTURE TO AVOID CUTS OR ABRASIONS.
Due to the product shape and dimension, the name and address of the importer/manufacturer are
printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our local contact details.
1
Camera
Microphone
LED Indicator
Loudspeaker
SYNC Button
Lens
PIR
Photoresistor
Power Port
Name Description
SYNC Button Hold for 6seconds to get the camera ready for Wi-Fi
configuration.
PIR With the PIR (Passive Infrared), the device can detect
human bodies, animals, or other objects to determine when
there is a possible break in and begins to record footage.
LED Indicator • Solid Red: Camera starting up.
• Solid Blue: Video being viewed in the EZVIZ app.
• Slow-flashing Blue: Functioning properly.
• Slow-flashing Red: Camera charging/Network exception.
• Fast-flashing Blue: Camera ready for Wi-Fi configuration./
Synchronization in progress.
• Fast-flashing Red: Camera exception (e.g. Micro SD card
error)/Low battery.
Photoresistor Detect the environment's light conditions to activate the
Day/Night switch function.
Power Port For charging the battery or powering up the camera.
2
Base Station
Power Button
SYNC Button/
Circular LED
Indicator
Power Port
Siren
Ethernet Port/
Network Indicator
Reset Button
Name Description
Power Button Press to connect or cut off power.
SYNC Button Press to start synchronization with the camera
(Synchronization can last up to 2 minutes).
Circular LED
Indicator
• Solid Green: The system is working properly.
• Solid Blue: Device is not connected to the Internet.
• Flashing Blue: Device is starting synchronization with
the camera.
• Off: Device is turned off.
Siren Once the siren is enabled and camera detects human
bodies, animals, or other objects, a high volume warning will
be triggered.
Network Indicator • Solid Green: The Ethernet cable is connected.
• Flashing Green: Data transmission in progress.
• Off: The Ethernet cable is disconnected.
Reset Button Hold for 7 seconds to restart and reset all parameters to
default.
3
Setup
Before you use the camera wirelessly, we recommend that you fully charge
the battery. You can use the power adapter to charge the battery.
Step 1: Install the battery
1.Unlock the battery compartment by pressing and holding the latch, at
the same time pull back the battery cover to open the compartment.
2.Pull the battery buckle upwards and insert the battery.
3.Insert a micro SD card into the micro SD card slot if needed (For
detailed operations, you can refer to the camera Quick Start Guide).
4.Close the battery cover.
Write down the verification code located on the battery, you are required
to input it when you live view or play back the video.
Step 2: Charge the Battery (Optional)
1.If the camera is outdoor, bring it indoors to charge the battery.
2.Connect the power cable to the power adapter.
3.Connect the power adapter to an indoor electrical outlet (5V 2A).
Power Outlet
The camera LED indicator status
Slow-ashing red Battery charging
Off Battery fully charged
4
Step 3: Power on the Base Station
1.Connect the power cable to the power adapter.
2.Connect the power adapter to an indoor electrical outlet (5V 2A).
Power Outlet
The circular LED indicator turns solid blue, when the base station is
started up.
Step 4: Connect the Base Station to the Internet
Connect the base station to an open LAN port on your router using
Ethernet cable.
Ethernet Cable
The circular LED indicator turns solid green, when the base station is
connected to the network.
Step 5: Get the EZVIZ app
1.Connect your mobile phone to the Internet.
2.Search for EZVIZ in the App Store or Google Play(TM).
3.Download and install the EZVIZ app.
4.Launch the app, and register an EZVIZ user account.
5
If you have already used the app, make sure that it is the latest
version.
To find out if an update is available, go to the App store
and search for EZVIZ.
Step 6: Add the Base Station to Your EZVIZ Account
1.Login to the EZVIZ App.
2.On the Home screen, tap “+” on the upper-right corner to go to the
scan QR code interface.
3.Scan the QR code on the base station or manually enter the serial
number to add the base station.
• Please make sure your base station is powered on.
• Please make sure your base station is connected to the
Internet.
4.Tap the “Add” button to nish setup. This will take approximately
1minute.
5.Your EZVIZ app turns to Device Setup Interface when the base station
is added to your EZVIZ account successfully.
6.Tap “Go to Add” button to link camera(s) to your base station.
You can also tap the “Finished“ button to nish the settings.
Table of contents
Languages:
Other Ezviz Accessories manuals
