Extech Instruments 480303 User manual

480303 Ver. 1.4 9/03

User's Guide

Motor Rotation and 3-Phase Tester

Model 480303

Introduction

Congratulations on your purchase of Extech’s Motor Rotation and 3-Phase Tester. This

professional meter, with proper care, will provide years of safe reliable service.

Controls and Indicators

1. Motor Rotation Test Terminal

2. Power Indicator

3. Power Button

4. Clockwise Indicator

5. Counter Clockwise Indicator

6. 3-Phase Rotation Tester Input

7. 3-Phase Rotation Indicator

Operation

Phase Sequence Function

The Phase Sequence function determines if the 3 phases are live and the direction a motor

will turn if connected as indicated in Table 1.

1. Connect the three test leads to the power source

2. Observe that all three lights (L1, L2, L3) are active

3. Observe the directional indication lights.

4. If the direction indicated is counter-clockwise, reconnect any two wires until the

clockwise indicator is lighted.

5. If the clockwise indicator is lighted, label the power source "L1, L2, L3"

Motor Rotation Function

1. Make sure there is no voltage present.

2. Insert the test leads into the input terminals:

3. L1 - Black, L2 - Red, L3 - White. Attach the

other ends of the leads to the 3 phase motor.

4. Press and Hold the power button. The green

power indicator will light up.

5. Rotate the motor shaft clockwise (as viewed

from the end of the shaft). If the red clockwise

indicator is lit the 3-phase motor will rotate

clockwise if connected to the power supply

by the L1-L2-L3 sequence.

6. Rotate motor shaft counter-clockwise. If the

red counter-clockwise indicator is lit the 3-

phase motor will rotate clockwise if

connected to the power supply by the L1-L2-

L3 sequence.

7. If you want the motor to rotate counterclockwise, change the order of the connections to

L2-L1-L3 and the motor will rotate counter-clockwise.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

Specifications

Signal Input Voltage 100VAC up to 660VAC max., 3 minute limit for over

500VAC. (3 phase Indicator only)

Signal Frequency Range 45 to 70 Hz

Operating Temperature 32ºF to 122ºF (0ºC to 50ºC)

Operating Humidity Less than 90% RH

Power Supply 006P DC9V battery

Power Consumption Consumption current approx. 14mA for motor rotation

field tester and 7mA per phase for rotation field indicator

Dimension 5.9 x 3.4 x 1.6” (150 x 85 x 40mm)

Weight 0.5 lbs. (230g ) without battery

Standard Accessories Test leads (red, black & white) and Instruction Manual

Maintenance

Battery Replacement

1. Replace the battery when green indicator becomes dim.

2. Open the battery cover with flat screwdriver or coin.

3. Replace the battery (006 DC9V) and reinstall the battery cover

Fuse Replacement

1. Replace fuse when red indicators fail to light.

2. Open the case and replace the 0.2A fuse.

3. Reinstall the case.

Warranty

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

Table of contents

Other Extech Instruments Test Equipment manuals

Extech Instruments

Extech Instruments 380320 User manual

Extech Instruments

Extech Instruments ExStik CL200 User manual

Extech Instruments

Extech Instruments 380395 User manual

Extech Instruments

Extech Instruments ET40 User manual

Extech Instruments

Extech Instruments ET10 User manual

Extech Instruments

Extech Instruments CB10 User manual

Extech Instruments

Extech Instruments MG325 User manual

Extech Instruments

Extech Instruments 382356 User manual

Extech Instruments

Extech Instruments CB10 User manual

Extech Instruments

Extech Instruments TK32 User manual

Extech Instruments

Extech Instruments ET10 User manual

Extech Instruments

Extech Instruments PRC50 User manual

Extech Instruments

Extech Instruments HDV700 User manual

Extech Instruments

Extech Instruments PRC15 User manual

Extech Instruments

Extech Instruments 480403 User manual

Extech Instruments

Extech Instruments HDV600 User manual

Extech Instruments

Extech Instruments 433201 User manual

Extech Instruments

Extech Instruments ET26B User manual

Extech Instruments

Extech Instruments 380353 User manual

Extech Instruments

Extech Instruments 7470 User manual

Extech Instruments

Extech Instruments 412355A User manual

Extech Instruments

Extech Instruments 412300 User manual

Extech Instruments

Extech Instruments CG204 User manual

Extech Instruments

Extech Instruments 382252 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual